Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

Biodegradation of 2-methylquinoline by Enterobacter aerogenes TJ-D isolated from activated sludge

Bacterial strain Enterobacter aerogenes TJ-D capable of utilizing 2-methylquinoline as the sole carbon and energy source was isolated from acclimated activated sludge under denitrifying conditions. The ability to degrade 2-methylquinoline by E. aerogenes TJ-D was investigated under denitrifying conditions. Under optimal conditions of temperature (35℃) and initial pH 7, 2-methylquinoline of 100 mg/L was degraded within 176 hr. The degradation of 2-methylquinoline by E. aerogenes TJ-D could be well described by the Haldane model (R² > 0.91). During the degradation period of 2-methylquinoline (initial concentration 100 mg/L), nitrate was almost completely consumed (the removal efficiency was 98.5%), while nitrite remained at low concentration (< 0.62 mg/L) during the whole denitrification period. 1,2,3,4-Tetrahydro-2-methylquinoline, 4-ethyl-benzenamine, N-butyl-benzenamine, N-ethyl-benzenamine and 2,6-diethyl-benzenamine were metabolites produced during the degradation. The degradation pathway of 2-methylquinoline by E. aerogenes TJ-D was proposed. 2-Methylquinoline is initially hydroxylated at C-4 to form 2-methyl-4-hydroxy-quinoline, and then forms 2-methyl-4-quinolinol as a result of tautomerism. Hydrogenation of the heterocyclic ring at positions 2 and 3 produces 2,3-dihydro-2-methyl-4-quinolinol. The carbon-carbon bond at position 2 and 3 in the heterocyclic ring may cleave and form 2-ethyl-N-ethyl-benzenamine. Tautomerism may result in the formation of 2,6-diethyl-benzenamine and N-butyl-benzenamine. 4-Ethyl-benzenamine and N-ethyl-benzenamine were produced as a result of losing one ethyl group from the above molecules.     

活化温度对SCAC制备过程中副产物生成规律的影响

文章研究了污泥-玉米芯活性炭(SCAC)制备过程中,活化温度对副产物(热解气和热解油)生成规律的影响。热解气和热解油分别采用气相色谱仪和气质联用仪进行分析检测。试验结果表明,随着活化温度的升高,SCAC的产量逐渐降低,热解气与热解油的产量则随之增多。不同温度条件下,热解气的主要成分均为H2和CO2,热解气中H2所占的体积百分数随着活化温度的升高而增加,而CO2则相应降低。此外,热解气中CH4的含量也会随着活化温度的上升而略有提高,说明较高的活化温度更有利于热解气的资源利用。热解油组分较为复杂,每个温度条件下的液态产物都包括上百种化合物,可分为烷烃,烯烃,苯类,酚类,腈类,杂环化合物,多环芳烃,有机酸,酰胺,酯类,甾体,醇,酮以及其他类共14大类型,其中以有机酸、腈类和甾体类有机物含量居多。随着活化温度的升高,有机酸和多环芳烃的含量有所增加,而酚类化合物的含量则有所降低;当活化温度升高至650℃以上时,甾体类有机物含量明显降低。     

2,2′-二硝基联苄生产废水的处理研究

对十六烷基三甲基溴化铵改性凹凸棒土、凹凸棒土负载TiO2采用XRD、FTIR以及TG等手段进行了分析和表征,对比了改性凹凸棒土、活性炭、大孔树脂等不同吸附剂和凹凸棒土负载TiO2对二硝基联苄生产废水的处理效果。结果表明:十六烷基三甲基溴化铵改性凹凸棒土的废水中污染物的去除率比凹凸棒土提高了2.5倍;凹凸棒土负载TiO2在波长λ=254 nm下光照0.5 h,对废水中污染物的去除率是凹凸棒土的2.0倍;投加量为3%活性炭在pH为2.0⁵.0时,对该类废水中污染物的去除率可达80%以上。     

活性污泥模型参数实际可识别性研究方法

可识别性研究是参数估计的第一步。对目前应用于活性污泥模型参数实际可识别性研究的三种方法进行了综述,根据模型的复杂程度以及所要研究的参数数量,研究者可选用不同的方法。     

活性污泥中超氧化物歧化酶(SOD)活性测定影响因素

研究以污水生物处理中的活性污泥为对象,采用氮蓝四唑光还原法测定超氧化物歧化酶(SOD)活性,从样品制备和保存方面探讨了是否添加溶菌酶液、细胞破碎时间、酶液保存时间与保存温度等因素对SOD活性测定的影响。研究表明,溶菌酶液的加入提高了细胞破碎效果;细胞破碎的条件为99次(工作3 s,停3 s),时间为40 min时破碎效果最好;酶液保存时间在4 h内最佳;-20℃保存比4℃保存对酶活性影响小。最佳检测条件为:取样量为1 mL时,反应温度为30℃,反应时间为20 min时,SOD酶活性最大。     

SBR工艺处理高盐有机废水的试验研究

采用SBR工艺分别研究了不同盐度驯化下的活性污泥的生物相和结构,及对COD、NH4＋-N、TP的去除率。结果表明,随着盐度的升高,活性污泥的微生物种类减少,结构变得紧密细小;盐度在1.5%范围内,SBR工艺对COD、NH4＋-N的去除率均达到90%以上;盐度为1%时,TP的去除率为76%。     

内循环活性炭生物流化床处理农药生产废水的试验研究

采用内循环活性炭生物流化床反应器处理某农药厂生产废水,通过试验研究了该反应器在室温条件下处理农药生产废水的性能.结果表明:当进水pH值控制在7.0～7.5、水力停留时间为6h、曝气量控制在使活性炭处于流化状态时,CODcr的去除率为50％,总氮的去除率为32.33％,同时可生化性明显提高,生物毒性有所降低.     

应用质子变化滴定测量法监测氨氧化的化学计量关系

开发了一套监测批式废水生物处理系统质子变化的自动滴定测量装置.装置由批式反应器、数据自动采集与保存系统和药品自动投加系统组成.通过实际测量活性污泥氨氧化反应中氢离子产生量与氨消耗量的化学计量比值,考察自动滴定测量装置的测试精度.在1L的反应器中改变氨氮浓度(以N计)分别为1.67、3.33、8.33、16.66和30.00mg/L下实测比值与其理论值十分接近,相对误差在2.09%～6.34%之间;保持氨氮浓度16.66mg/L,在1、2、3和4L的反应器中实测比值相对误差在2.09%～-18.57%之间,随反应器体积增大而明显增大.反应器系统中的碳酸氢盐和氨盐缓冲体系,特别是在较大容积反应器中的滴定动态效应是导致测试误差的重要原因.研究成果为滴定测量方法在废水生物处理过程中监测质子变化提供了一种重要方法.     

铅在棉秆基活性炭上的吸附动力学与热力学

以棉秆与棉秆纤维为原料,利用磷酸活化法制备了低成本的高比表面微孔棉秆基活性炭,通过静态实验研究了活性炭对水溶液中铅的吸附特性,测定了溶液pH值、吸附时间、溶液温度对吸附的影响,探讨了吸附动力学、热力学及吸附机制.根据低温液氮(N2/77K)吸附测定数据,以BET方程、BJH法及H-K法对活性炭孔结构进行了表征,以Boehm滴定、FTIR、零电荷点pHPZC测定及元素分析定量表征活性炭表面含氧官能团.结果表明,以棉秆和棉秆纤维为原料制备的活性炭的比表面积分别为1570和1731m2·g-1,含氧酸官能团含量分别为1.43和0.83mmol·g-1,均高于商业活性炭ST1300.静态吸附实验表明,棉秆基活性炭对铅有较大的吸附容量和吸附效率,最大吸附量超过120mg·g-1,溶液pH对吸附有较大的影响,吸附量随时间增大而增大,在5min内可达饱和吸附量的80%;吸附动力学数据符合假二级方程,Freundlich方程能更好地描述等温吸附行为;热力学研究表明,吸附吉布斯自由能(ΔG0)0,而焓变(ΔH0)0,说明吸附为吸热的自发反应过程,升温有利于吸附,离子交换可能在吸附过程中起了重要作用.