西藏色季拉山两种典型天然林分土壤活性有机碳组分与土壤呼吸特征研究

森林土壤活性有机碳和土壤呼吸及其组分区异是森林土壤碳循环过程研究的关键问题.青藏高原亚高山原始森林植被是我国重要的生态屏障,对全球陆地生态系统的碳收支平衡具有举足轻重的作用.本研究选取西藏色季拉山两种最典型的天然林分(急尖长苞冷杉和林芝云杉)为研究对象,测定了这两种林分的土壤活性有机碳含量和同期的土壤呼吸速率及其组分速率,分析了土壤呼吸及其组分与土壤活性有机碳组分之间的关系,结果表明,西藏色季拉山两种天然林分土壤总有机碳(TOC)、土壤颗粒有机碳(POC)、易氧化有机碳(LOC)和微生物量碳(MBC)含量均具有显著的表聚性.急尖长苞冷杉林土壤活性有机碳含量较高,其TOC、POC、LOC、MBC含量分别为57.05 g·kg-1、17.9 g·kg-1、12.2 g·kg-1和365.6 mg·kg-1.两种林分的土壤总呼吸速率(Rt)和微生物呼吸速率(Rh)差异不显著(p0.05),但它们与枯枝落叶呼吸速率(Rl)和根系呼吸速率(Rr)差异极显著(p0.01),同时,Rl和Rr之间差异极显著(p0.01).从不同林分来看,林芝云杉林的土壤总呼吸速率(Rt)和微生物呼吸速率(Rh)高,而急尖长苞冷杉林的枯枝落叶呼吸速率(Rl)和根系呼吸速率(Rr)高.两种林分土壤呼吸各组分对土壤总呼吸速率(Rt)的贡献率大小依次为:RhRlRr.两种林分均表现为微生物呼吸对总呼吸的贡献比例最高,林芝云杉为92.42%,冷杉为70.81%.两种林分的土壤活性碳组分与土壤呼吸关系最密切的是MBC,其次是LOC,最不密切的是POC.     

介质阻挡放电等离子协同TiO_2-GAC降解甲基橙的研究

采用介质阻挡放电(DBD)等离子协同颗粒活性炭负载TiO2(TiO2-GAC)对甲基橙进行降解,研究了该体系的协同处理效果,探讨了放电电压、初始pH、初始电导率、初始浓度和TiO2-GAC投加量等操作参数的影响,并建立了协同体系的表观反应动力学模型.实验结果表明,DBD与TiO2-GAC联合处理表现出明显的协同效应,处理25min后,协同体系对甲基橙的降解率和COD去除率分别为96.2%和90%,与单独DBD体系相比,分别提高了52.7%和50.4%;协同体系降解甲基橙的过程符合表观反应动力学模型,模型值与实验值吻合良好,总级数为2.352;体系中H2O2、O3浓度测定结果表明,与单独DBD体系对比,协同体系的H2O2浓度增高,而O3浓度降低,说明TiO2-GAC起到了催化作用;TiO2-GAC在DBD体系中获得了原位再生,五次再生循环后再生率达80%.     

长白山温带森林单萜烯排放模拟

于2010年夏季,采用松弛涡度积累(Relaxed Eddy Accumulation)技术在长白山温带森林铁塔上测量了挥发性有机物(VOC)冠层尺度的排放通量,同步测量了气象参数、光合有效辐射(PAR)等,初步获得长白山阔叶林单萜烯的排放通量.同时,利用PAR能量守恒原理,建立了冠层尺度上单萜烯排放的经验模式.结果发现,模拟结果与测量结果比较一致,平均而言,模拟值高出测量值约20%～40%.采用不同方法对经验模式进行了检验,结果表明,采用比较各个采样时段平均值的方法可行,而且经验模式对于2010年夏季不同采样时段的平均值也给出了较好的模拟结果,其模拟值高出测量值约20%～24%.     

采用新工艺处理延迟焦化冷焦水恶臭污染

延迟焦化装置冷焦水处理系统原采用半敞开式循环冷却工艺,焦炭塔顶高温溢流水进入冷焦热水罐及在凉水塔的冷却过程中,污水中含硫化氢的混合性气体加上罐内存有的有害气体逸放进入大气中,散发出强烈恶臭,严重污染周围环境.冷焦水密闭系统通过对冷焦水密闭控制,在冷焦热水罐顶增设胺液脱臭工艺,彻底解决了原来冷焦水恶臭污染环境这一难题.     

负载纳米零价铁铜藻基活性炭的制备及其去除水中Cr(Ⅵ)的研究

以铜藻为原料,采用氯化锌活化法、初湿含浸法制备了负载纳米零价铁铜藻基活性炭(NZVI/SAC),并采用X射线衍射、扫描电镜和X射线光电子能谱等方法对材料进行了分析.结果表明,纳米零价铁颗粒以50~150 nm粒径的球形形态负载在铜藻基活性炭上,且NZVI/SAC表面具有一层以铁的氧化物形态存在的核壳结构.对水中Cr(Ⅵ)的去除实验表明,NZVI/SAC是一种适用于高浓度Cr(Ⅵ)废水的处理材料;NZVI/SAC去除水中Cr(Ⅵ)的机制是还原反应与吸附共同作用,p H4时NZVI/SAC对Cr(Ⅵ)的去除以还原作用为主,p H4时材料对Cr(Ⅵ)的去除主要以NZVI和SAC的吸附作用决定;当载铁量为30%、p H=2、温度为30℃时,2 g·L-1的NZVI/SAC能将100 mg·L-1Cr(Ⅵ)在10 min内快速降解,此时以还原反应为主,最终去除率达100%.     

Design methodology for active disassembly based on the decapitated head method

Due to the characteristic that shape memory materials can quickly return to their original shape and have large deformation, such materials can be used as the connection in active disassembly devices. However, existing active disassembly devices typically require two moulding steps and complicated machining processes that result in high manufacturing cost. The active disassembly device based on the proposed decapitated head method has only one moulding step and lower manufacturing cost. Its disassembly mode is local damage disassembly, which can decrease the active disassembly cost and improve disassembly efficiency. This paper describes the active disassembly theory and the design methodology based on the decapitated head method, and then analyses the design criteria and feasibility of this method with a real case study.     

On Valuing Information in Adaptive‐Management Models

Abstract: Active adaptive management looks at the benefit of using strategies that may be suboptimal in the near term but may provide additional information that will facilitate better management in the future. In many adaptive‐management problems that have been studied, the optimal active and passive policies (accounting for learning when designing policies and designing policy on the basis of current best information, respectively) are very similar. This seems paradoxical; when faced with uncertainty about the best course of action, managers should spend very little effort on actively designing programs to learn about the system they are managing. We considered two possible reasons why active and passive adaptive solutions are often similar. First, the benefits of learning are often confined to the particular case study in the modeled scenario, whereas in reality information gained from local studies is often applied more broadly. Second, management objectives that incorporate the variance of an estimate may place greater emphasis on learning than more commonly used objectives that aim to maximize an expected value. We explored these issues in a case study of Merri Creek, Melbourne, Australia, in which the aim was to choose between two options for revegetation. We explicitly incorporated monitoring costs in the model. The value of the terminal rewards and the choice of objective both influenced the difference between active and passive adaptive solutions. Explicitly considering the cost of monitoring provided a different perspective on how the terminal reward and management objective affected learning. The states for which it was optimal to monitor did not always coincide with the states in which active and passive adaptive management differed. Our results emphasize that spending resources on monitoring is only optimal when the expected benefits of the options being considered are similar and when the pay‐off for learning about their benefits is large.     

Some Aspects of Vehicle Active Safety

Three selected aspects of vehicle active safety are presented in this article: (a) modeling the driver and the driver–vehicle environment system, (b) the dynamic aspects of vehicle rollover, and (c) an analysis of the process of passing. Sample solutions and results show the need for further research in the field of vehicle safety in order to lower the probability of drivers, passengers, and other road users being involved in road accidents.     

洞庭湖、鄱阳湖白鱀豚和长江江豚的生态学研究

１９９７年至１９９９年对洞庭湖和鄱阳湖的湖区及其支流的白豚和长江江豚的分布、数量和活动规律进行了系统的调查。调查结果表明,白豚已在洞庭湖和鄱阳湖绝迹。长江江豚随着水位的变化,其分布范围、数量和活动规律也随之而变化。长江江豚在洞庭湖的分布范围主要集中在从城陵矾到鲶鱼口一带,其种群数量大致力１００～１５０头。洞庭湖各支流中已看不到江豚的踪迹。在鄱阳湖主要分布在湖口至龙口一带,老爷庙至小矶山是其集中分布区。赣江南北支、抚河下游及康山河在涨水季节也有少量江豚活动。洞庭湖和鄱阳湖大规模的围湖造田,湖区的迅速淤积变浅,大桥的修建,有害渔具渔法的大量使用,船舶数量的大量增加是长江江豚迅速减少的重要原因,两大湖泊中的长江江豚急待保护。     

Ca^2＋在净水生物膜团聚体培养中的影响研究

通过在5组相同型号的SBBR反应器（A、B、C、D和E）内调节进水中的Ca2＋含量,研究Ca^2＋在净水生物膜团聚体培养过程的作用影响。结果表明,进水Ca2＋投加浓度为25 mg/L时驯化培养的生物膜团聚体具有较好的抗挤压能力,抗压强度达到了22 N/cm2,密度为1.059 g/cm^3,活性微生物的百分含量达到了86.90%,远远高于一般污泥团聚体中的微生物含量。分析运行效果,反应器C和D的生物膜团聚体通过29 d的驯化培养就达到了一个比较好的净水效果,并能维持稳定状态,相比于一般生物膜反应器的驯化时间有所缩短。不同进水负荷条件下氨氮的去除率变化表明,反应器C和D针对不同进水负荷表现出来的适应效果明显优于其他反应器。