Insights into multisource sludge distributed in the Yangtze River basin, China: Characteristics, correlation, treatment and disposal

Sludge is the by-product of wastewater treatment process. Multisource sludge can be defined as sludge from different sources. Based on the sludge properties of five typical cities in the Yangtze River basin, including Jiujiang, Wuhu, Lu'an, Zhenjiang and Wuhan, this study investigated and summarized the characteristic variations and distribution differences of multiple indicators and substances from municipal sludge, dredged sludge, and river and lake sediments. The results demonstrated pH of multisource sludge was relatively stable in the neutral range. Organic matter and water content among municipal sludge were high and varied considerably between different wastewater treatment plants. Dredged sludge had an obviously higher sand content and wider particle distribution, which could be considered for graded utilization depending on its size. The nutrients composition of river and lake sediments was usually stable and special, with lower nitrogen and phosphorus content but higher potassium levels. The sources of heavy metals and persistent organic pollutants in multisource sludge were correlated, generally much higher among municipal sludge than dredged sludge and river and lake sediments, which were the most important limitation for final land utilization. Despite various properties of multisource sludge, the final fate and destination have some overall similarities, which need to be supplemented and improved by standards and laws. The study provided a preliminary analysis of suitable technical routes for municipal sludge, dredged sludge, river and lake sediments based on their different characteristics respectively, which was of great significance for multisource sludge co-treatment and disposal in the future of China.     

Flame behaviors and pressure characteristics of vented dust explosions at elevated static activation overpressures

Dust explosion venting experiments were performed using a 20-L spherical chamber at elevated static activation overpressures larger than 1 bar. Lycopodium dust samples with mean diameter of 70 μm and electric igniters with 0.5 KJ ignition energy were used in the experiments. Explosion overpressures in the chamber and flame appearances near the vent were recorded simultaneously. The results indicated that the flame appeared as the under-expanded free jet with shock diamonds, when the overpressure in the chamber was larger than the critical pressure during the venting process. The flame appeared as the normal constant-pressure combustion when the pressure venting process finished. Three types of venting processes were concluded in the experiments: no secondary flame and no secondary explosion, secondary flame, secondary explosion. The occurrence of the secondary explosions near the vent was related to the vent diameter and the static activation overpressure. Larger diameters and lower static activation overpressures were beneficial to the occurrence of the secondary explosions. In current experiments, the secondary explosions only occurred at the following combinations of the vent diameter and the static activation overpressure: 40 mm and 1.2 bar, 60 mm and 1.2 bar, 60 mm and 1.8 bar.     

改性活性炭纤维吸附炸药废水中TNT实验研究

本文研究了改性活性炭纤维对炸药废水中TNT的吸附行为。研究表明:1 mol/L HNO3改性的活性炭纤维吸附效果最好,其对炸药废水中TNT的最佳吸附条件为:吸附剂用量为0.6 g/25 m L,吸附平衡时间为60 min,升温有利于吸附进行。Langmuir和Freundlich吸附等温线均能较好地描述活性炭纤维对TNT的吸附,吸附动力学分析表明,吸附过程遵循准二级动力学规律。     

贵州织金蒙家大坡地下水水化学特征分析

通过对贵州织金蒙家大坡地下水水化学指标进行分析。结果表明,研究区地下水Ca2+受环境影响最小、空间变异性最小,Na+受环境影响最大、空间变异性最大;各阴阳离子含量与TDS含量呈显著正相关关系,其相关性依次为:Ca2+SO2-4Mg2+Cl-HCO-3K+Na+;TDS含量的增加主要受SO2-4离子的影响,总硬度的变化主要受Ca2+的影响;地下水成分主要来自于碳酸盐矿物的溶解,其次是硫酸盐、含硫矿物、硅酸盐矿物以及盐岩的溶解,地下水类型主要向SO4·HCO3-Ca型和HCO3·SO4-Ca型转化。     

露天矿山岩质边坡台阶的平台宽度优化

矿山发生局部破坏的边界条件主要是由台阶的几何特征所决定,台阶边坡几何特征主要有台阶坡面角、台阶高度、台阶的平台宽度和台阶组合4要素。在对整体边坡角优化的同时,同样需要对台阶的宽度进行优化。通过分析台阶边坡特征,计算出不同规模破坏的边界条件,进而对矿山台阶的宽度进行优化。通过对一个矿山边坡算例的优化分析,在不改变整体边坡角的前提下,对台阶宽度进行优化,可以避免某些大规模的台阶破坏可能,提高矿山边坡的稳定性。     

基于数值模拟的公交车火灾发展过程及特性研究

采用数值模拟方法研究典型型号公交车的火灾发展过程,探讨车门打开对火情发展和人员逃生的影响.通过描述火源、公交车的结构及其内饰物的属性,研究车厢内关键位置的温度分布、能见度及CO和O2体积分数的变化规律,以揭示公交车的火灾发展、烟气运动过程及对人员安全逃生的影响.结果表明:车门打开后由于供氧充足,明显加速了火势的蔓延和烟气扩散,并使得燃烧温度显著提高;打开车门后20 s内,车门附近能见度和O2体积分数显著增高,CO体积分数有所降低,是乘客逃生的关键时间.     

构造煤孔隙结构与瓦斯耦合特性研究

利用压汞法、低温氮吸附法、瓦斯等温吸附和解吸试验对平煤八矿构造煤和共生原生结构煤进行综合分析,探讨了构造煤孔隙结构与瓦斯耦合特性.结果表明,构造煤以微孔为主,中孔和大孔相对发育且含较多细颈瓶孔,孔隙连通性差.与共生原生结构煤相比,构造煤各孔径阶段的孔容和孔比表面积都有所增加.构造煤比表面积的增加具有阶段性,即孔径＜ 1.2 nm时为慢增加阶段,孔径=1.2 ～ 4.9nm时为快增加阶段,孔径＞4.9 nm时为稳定阶段.构造煤极限瓦斯吸附量a的增大与比表面积快增加阶段关系密切,但小于其BET比表面积的增幅.瓦斯解吸初期0～2 min内构造煤瓦斯解吸速度和解吸量明显大于共生原生结构煤,与中孔和大孔的变化一致,2 min以后瓦斯解吸迅速衰减.低煤体强度、高瓦斯含量的构造煤以气-煤共溶体形式储集更多弹性潜能,突然卸压时瓦斯膨胀能迅速释放,煤层中发育的构造煤增加了煤与瓦斯突出的危险性.     

固定化微生物吸附剂对Cr3+的吸附特性研究

从皮革铬鞣、复鞣污泥等处分离、纯化出4株菌株TP、XB、MY和TQ,采用海藻酸钠悬滴法并添加膨润土制成微生物固定化吸附剂,研究该吸附剂对低质量浓度Cr3+的吸附特性。结果表明,4种固定化颗粒对低质量浓度Cr3+有较好的吸附作用。实验室条件下,当吸附温度为30℃时,6 h后固定化吸附剂进入缓慢吸附和平衡吸附阶段。吸附等温曲线拟合研究表明,不同温度下吸附剂适合不同的等温模型。4种微生物吸附剂均与Lagrange拟二级动力学模型拟合最佳,且吸附量从高到低为TQ、TP、XB、MY。颗粒内扩散模型研究表明,20℃下XB和MY对Cr3+的吸附分为快速吸附和缓慢吸附阶段;30℃和40℃下固定化颗粒均呈现表面吸附—缓慢吸附—平衡吸附过程。热力学研究表明,吸附反应均属于自发进行的吸热过程,并且均是化学吸附。     

连续型空间故障树中因素重要度分布的定义与认知

为了解工作环境条件因素对系统故障概率的影响的特征,同时丰富连续型空间故障树(CSFT)的理论框架,提出因素重要度分布的概念。因素重要度分布从经典故障树的概率重要度发展而来,目的是研究系统所处环境因素变化导致系统可靠性变化的程度。给出元件和系统的因素重要度分布概念、公式及所需基础数据,并分析因素重要度分布的正负分布特点。使用该概念研究元件X1和系统T的因素t重要度分布和因素c重要度分布。结果表明:在不同环境中,对于因素t或c变化影响元件或系统的故障概率变化程度是不同的。因素重要度分布有效地表达了t和c对元件或系统的故障概率影响特征。