Removal of Mo(VI) from aqueous solutions using sulfuric acid-modified cinder: kinetic and thermodynamic studies

Removal of Mo(VI) from aqueous solutions was investigated using cinder modified by sulfuric acid. Various parameters such as pH, agitation time, Mo(VI) concentration, and temperature have been studied. The maximum adsorption of Mo(VI) occurred at pH between 4.0 and 6.0. Kinetic studies showed that the adsorption generally obeyed a pseudo second-order model. The activation energy was 31.4?kJ?mol^?1, indicating that the adsorption process was governed mainly by interactions of physical nature. Furthermore, application of Langmuir and Freundlich isotherm models to the adsorption equilibrium data showed that the adsorption behavior obeyed the Langmuir model. The adsorption capacity was found to be 10.8?g Mo(VI)?kg^?1 adsorbent. Finally, thermodynamic parameters such as ΔH ⁰, ΔS ⁰, and ΔG ⁰ were also evaluated, which showed that the adsorption of Mo(VI) on the treated cinder was endothermic, entropy increasing, and spontaneous. In conclusion, the sulfuric acid-modified cinder was shown to be an inexpensive, effective, and simple adsorbent for the removal of Mo(VI) from water.     

1,3,5-triazine-triethylenetetramine polymer: an efficient adsorbent for removal of Cr(VI) ions from aqueous solution

The synthesis of 1,3,5-triazine-triethylenetetramine (TATETA), its characterization by infrared spectroscopy and elemental analysis, and its application for removal of Cr(VI) ions from aqueous solution is reported. The effects of pH, contact time, initial concentration of Cr(VI), sorbent dose, and temperature on adsorption were investigated and optimized by batch adsorption experiments. Adsorption was highest at acidic conditions with an equilibration time of 25 min. The adsorption followed a Langmuir model, with an adsorption capacity of 303 mg g^?1, was second order in its kinetics, and exothermic and thus spontaneous.     

1981~2010年深圳市不同等级霾天气特征分析

利用1981~2010年深圳市地面观测及空气质量监测资料,分析深圳不同等级霾天气的长期变化特征以及大气水平能见度、空气质量与霾的关系.结果表明:深圳霾日数总体呈增多趋势,强度增强,中度以上霾增多;各等级霾日数均呈增多态势,但不同等级霾日占年总霾日的比例变化趋势不同,轻微霾所占比例下降,轻度以上霾上升; 霾天气呈现冬季>秋季>春季>夏季的季节特征,但重度霾却是夏季最多; 霾导致大气水平能见度明显下降,霾日平均能见度较非霾日低6~7km,霾等级越高,能见度下降越明显,霾日能见度日变化幅度较非霾日小;霾日SO2、NO2浓度为非霾日的1.4~1.7倍,PM10是非霾日的2.2倍,大气颗粒物污染加剧可能是深圳能见度恶化、霾天气增多的一个重要原因;针对荔香站霾日SO2浓度日变化不明显,PM10 、NO2浓度呈双峰型分布,与上下班时段吻合,说明机动车的增加也是深圳霾天气增多的主因之一;霾等级越高,空气中PM10、SO2、NO2的浓度越高,从轻微到重度霾各级之间SO2、NO2和PM10浓度增幅大都在15%~20%.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Sea water quality monitoring in Rhodes and Cos (Greece)

During the years 1983–1986, a program aiming at monitoring water quality of the most crowded beaches, as well as assessing and minimizing pollution from certain land based sources was carried out in Rhodes and Cos. The program was directed towards inspections of treatment plants as well as laboratory analyses of treated effluents from large hotels. As a result, almost one in four hotels was obliged to construct a new treatment plant. In order to help personnel to improve plant efficiency through day‐to‐day maintenance a three day seminar was held in June 1985. Sea water quality parameters (total coliforms and E. coli) were found to be well below the limits set by E.E.C. directives.     

Modeling of adsorption kinetics and equilibria of acid dyes onto activated carbon in single- and binary-component systems

Adsorptive removal of Acid Blue 127 and Acid Yellow 17 from their single and binary solutions has been studied using powdered activated carbon (PAC). The dyes used extensively for dying of nylon fiber in textile industry are known as Nylomine Blue P-B (NB) and Nylomine Yellow P-4G (NY), respectively. Time-dependent results obtained from single-component system have been better predicted by two resistance diffusion model rather than homogeneous surface diffusion. The magnitudes of film- and intraparticle diffusion coefficients calculated from McKay equation are ～10^?9 and ～10^?15 m² s^?1, whereas surface diffusion coefficients have been estimated as ～10^?13 m² s^?1 using Vermeulen approximation. Experimental equilibrium isotherms have been evaluated by changing initial dye concentrations in the range of 0.02–1.00 of mmol L^?1. Freundlich isotherm parameters for individual solutions of the dyes have been used to predict their equilibrium behaviors in binary solutions by applying extended Freundlich model. Langmuir isotherm model and its extended form have also been fitted to the data for single- and binary-dye solutions, respectively. Thermodynamic functions derived from the temperature dependence of adsorption equilibrium constants in 298–318 K range show that adsorption processes are endothermic but spontaneous.     

Recovery of seven kinds of cfc and cfc replacements on high‐surface area activated carbon

The adsorption isotherms, the constants of the Dubinin—Radushkevich plots, and the constants of the Langmuir plots of chlorofluorocarbon (CFC) and CFC replacements on high‐surface area activated carbon were investigated to estimate the recovery efficiency of CFC and CFC replacements. The adsorption and desorption of HFC134a on a high‐surface area activated carbon was much easier than that of CFC 113 and the CFC replacements. The recovery efficiency of CFC replacements depends on the hydrogen atoms in molecule. It is possible that the saturated amount adsorbed in the pores or on the surface of the activated carbon could be evaluated by the W_s constant of the the Langmuir equation and the W_o constant of the Dubinin‐Radushkevich equation. The a constant of the Langmuir equation and the BE_o constant of the Dubinin‐Radushkevich equation depend on the molecular composition.     

北京北运河水系水质污染特征及污染来源分析

以北运河水系主要干支流2011年1～12月23项指标的监测数据为依据,采用水质类别法和平均综合污染指数法,对水质污染特征进行综合评价,运用主成分分析和系统聚类分析法,对水质指标主成分以及水质差异进行分类,并进一步对不同干支流污染来源进行分析.结果表明,北运河水系由于排污量大,地表水污染严重,除城市中心区部分河流水质为Ⅲ~Ⅳ类外,城市排水河流、远郊河流水质均为劣Ⅴ类.水质由3个主成分组成,COD、CODMn、BOD5、NH3-N、TP等为第一主成分;汞为第二主成分;石油类为第三主成分.干支流水质分为4类:第1类为清洁水源类河流,主要集中在城市中心区,降雨地表径流、雨污合流管网溢流引起的非点源污染是影响其水质达标的重要污染源;第2类为再生水水源类河流,主要集中在城市排水上游河流,城镇污水处理厂排水是其主要污染源;第3类为再生水与污水混合水源类河流,主要集中在城市排水下游河流及部分远郊区河流,由于城市下游排水管网不健全,远郊区污水集中处理率低,生活源和农业源的污染贡献率较高,水质污染严重;第4类为污水水源类河流,分布于远郊区县,农业污染占比较大,水质污染最严重.     

污泥基活性炭去除水中重金属离子效能与动力学研究

以城市污泥为主要原料制备了污泥基活性炭(SAC),考察了其对重金属离子的吸附去除效能和吸附动力学规律.并选择了2种商品活性炭(煤质炭,MAC和椰壳炭,YAC)作为对比,以初始浓度为50mg/L的Cu(II),Pb(II),Cd(II),Cr(VI)4种重金属离子为去除对象,分别进行了3种活性炭的表面理化性质分析及其对4种重金属离子的吸附试验.结果表明,SAC的比表面积和微孔容积仅为YAC和MAC的1/3~1/2,吸附速率也相对较慢,但其对Cu(II),Pb(II),Cr(VI),Cd(II)的平衡吸附量却远大于2种商品活性炭,分别为9.9,8.9,8.2,5.4mg/g,说明SAC表面的高酸性基团含量对重金属离子的吸附起到了关键作用;Langmuir与Freundlich吸附等温模型均能较好地拟合SAC对Cu(II)和Pb(II)的吸附,SAC对Cr(VI)的吸附过程更符合Langmuir模型,而SAC对于Cd(II)的吸附过程用Langmuir与Freundlich两个模型均不能较好地拟合,说明SAC表面缺少能够与Cd(II)发生反应的结合位点.     

Cu(Ⅱ)印迹[CTS/PVP]和[CTS/PVP/C]材料的制备及表征

以壳聚糖(CTS)、聚乙烯吡咯烷酮(PVP)、活性炭(C)为基材,Cu(Ⅱ)为印迹离子,制备了CTS/PVP共混印迹球[Cu(Ⅱ)-IICP]和CTS/PVP/C共混印迹球[Cu(Ⅱ)-IICPC].以Cu(Ⅱ)的吸附量作为评价指标,对两种共混印迹球的制备条件进行了优化.研究结果表明,当CTS/PVP的质量比为6∶4,活性炭质量分数为0.6%,Cu(Ⅱ)模板剂质量分数为0.05%,所制备的两种共混印迹球吸附性能较佳,且对Cu(Ⅱ)有较好的选择吸附性.物理吸附分析结果表明,与未印迹相比印迹材料的比表面积明显增大.FTIR谱图分析,Cu(Ⅱ)模板主要与CTS和PVP中的—NH2和—OH发生了配位作用.XRD谱图分析结果表明,CTS与PVP、C、Cu(Ⅱ)之间发生了相互作用,改变了CTS原有的晶体结构,使其结晶度降低.