现代化工分离技术在环境保护中的应用

介绍了高效导向筛板、新型高效填料、超临界流体萃取等现代化工分离技术及其在清洁生产和废物处理方面的应用。     

磁分离技术在我国废水处理中的研究进展

本文介绍了磁分离技术的基本原理、分离方法和设备，综述了该技术在某些特定废水处理中的应用现状。磁分离技术的实际应用具有分离效率高、分离速度快、选择性好、处理对象广、成本低廉、分离物系的粒度可达到很小，并且不受处理体系的温度、密度、酸碱度限制等优点，可以使某些采用传统分离方法较难或不能分离的物系得以顺利地分离，有较为广泛的应用前景。     

絮凝法分离谷氨酸菌体的研究

采用絮凝法对味精发酵生产过程中发酵液中的菌体进行研究，得到无机凝聚剂与高分子絮凝剂复合配比使用是发酵液去除菌体的有效办法。对复合用药除菌后的谷氨酸发酵液和原谷氨酸发酵液进行谷氨酸回收的比较，谷氨酸的回收率提高了8．8％。     

磁选柱在矿山磁选尾矿和硫铁矿烧渣处理中的应用

介绍了磁选柱的结构、分选原理、分选过程及其在处理矿山磁选尾矿和硫铁矿烧渣方面的应用。用磁选柱精选磁铁矿尾矿，得到的精矿品位大于66％；用磁选柱精选硫铁矿烧渣，得到的精矿品位大于65％。硫的质量分数降至0．84％。     

炼油厂"三泥"离心脱水处理研究

通过对目前炼油厂“三泥”性状的调查，利用已有污泥处理设施进行了炼油厂“三泥”离心分离的现场试验，并分析了影响“三泥”离心分离处理工艺的主要因素，发现了离心机转速和絮凝剂投加量对“三泥”离心分离的有关规律和最佳操作条件，在此基础上，提出了适合炼油厂“三泥”处理系统的优化方案。     

利用造纸黑液回收电镀废液中铬的研究

本文报道了利用造纸黑液回收电镀废液中铬的方法，阐明了造纸黑液中所含有还原性物质与Ｃｒ＾６＋的反应机理；讨论了进行反应的最佳条件以及采用这一方法对废液的治理效果。     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

污水净化装置内部流场特性分析研究

针对目前城市污水存在悬浮物和砂粒的问题,为了减少砂粒大量存在给后续单元带来的处理压力,设计了一种可实现在加药、絮凝等处理模块前,完成污水内固相悬浮物及颗粒的新型净化装置.基于计算流体动力学软件Fluent,运用混合相模型(Mixture),对新型污水净化装置内部流场特性及分离性能进行数值模拟分析.模拟结果显示新型污水净化装置内部流场分布均匀,分离性能稳定并呈现出了较好的固相去除效果,其中悬浮物的分离效率达90%以上,固相颗粒分离效率达91%.     

放射性废水的膜处理技术研究进展

核燃料的生产、核电厂的运行、同位素的生产和使用等过程都会产生着大量的放射性废水,为了保护环境和人类健康,这些废水必须经过安全、经济和有效的处理处置.放射性废水传统的处理方法主要包括过滤法、离子交换法、蒸发法或这几种工艺的组合.近年来,膜分离技术在放射性废水处理中得到了广泛的研究,发达国家已有应用膜分离技术处理放射性废水的实例,而我国规模化应用的实例还很少见.本文首先介绍了放射性废水的来源及组成,分析了各种放射性废水处理方法的优势和不足,包括化学沉淀法、过滤法、离子交换法、蒸发浓缩法、吸附法、生物还原/吸附法和膜分离法等.在此基础上,重点介绍了各种膜分离技术,包括微滤、超滤、纳滤、反渗透、膜蒸馏等在放射性废水处理中研究与应用现状,对已有的文献资料进行了较系统全面的分析、归纳和总结,对各种方法的优缺点及适用范围进行了比较,对膜技术在放射性废水处理中的应用前景及问题进行了讨论.最后,简要介绍了放射性废水处理产生的浓缩产物的最终处理处置,对放射性废水处理技术未来的研究和发展方向给出了建议.     

苯酚降解红球菌的分离鉴定及降解特性研究

采用富集培养的方法,从唐山污水处理厂附近的植物根际土中分离得到1株高效苯酚降解菌11-111。该菌株为革兰氏阳性菌,可以在以苯酚为唯一碳源和能源的无机盐培养基上生长,能够耐受最高浓度为2 000 mg/L的苯酚。对该菌株的降解性能研究表明,在温度24~32℃,pH值6.5~8.5,装液量≤20 mL(100 mL摇瓶)范围内,摇床转速为160 r/min,菌株对初始浓度500~1 500 mg/L的苯酚均能有效降解。根据该菌株的形态、生理生化特性和16S rRNA基因序列同源性分析结果,鉴定为红球菌属(Rhodococcus sp.)菌株。该菌株具有较强的环境适应能力和苯酚降解能力,有较高的研究价值及应用前景。