Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

The Influence of Chironomus plumosus Larvae on Nutrient Fluxes and Phosphorus Fractions in Aluminum Treated Lake Sediment

One of the methods to diminish the internal phosphorus (P) loading is inactivation of P by aluminum (Al). After addition of Al to lake water an Al(OH)₃ floc is formed, which settles to the bottom and initially form a lid on the sediment surface. The effects of Chironomus plumosus larvae on sediment nutrient fluxes and P binding-sites in the sediment after addition of Al were tested. C. plumosus larvae were added to sediment cores in which sediment–water fluxes of nutrients were measured four times. After one month, the sediment was sectioned with depth and P fractions were measured by sequential chemical extraction. The chironomids created burrows through the Al layer which caused a significantly increased efflux of P from the Al treated sediment, because the P had only limited contact to the added Al. The chironomids also affected the P fractions in the sediment by their bioturbating activity. Thus, they caused increased Al concentrations in the upper part of the Al treated sediment. This created an enhanced contact between Al and P in the upper 7 cm of the sediment and, as a result, an increased binding of P to Al and a lowered porewater P. The DIP efflux is therefore expected to be lowered after the initial phase. Al had no effects on the nitrogen fluxes, but the chironomids enhanced the release, and decreased the release or increased the uptake by the sediments.     

生物还原-化学沉淀法自烟气中的SO2制备ZnS

采用生物还原—化学沉淀法自烟气中的SO2制备ZnS,将含有Zn(OH)2杂质的粗品ZnS通过化学提纯制得高纯度ZnS。实验结果表明,采用NH4C l-NH3.H2O混合液对含有Zn(OH)2杂质的粗品ZnS进行提纯的优化条件为:每500m g粗品ZnS加入NH4C l与NH3.H2O摩尔比为1∶1、两组分浓度均为3.0m o l/L的10mLNH4C l-NH3.H2O混合液。X射线衍射分析表明,提纯后的产物粉末全部为ZnS,其纯度与ZnS标准试样相当。     

稠油废水生物处理主要影响因素分析

有机聚合物和石油烃类物质是稠油废水中的主要污染物.应用辽河油田锦采污水处理厂稠油废水中筛选分离出的菌株B0501,分析其在稠油废水生物处理过程中对废水COD_Cr的去除作用,研究了不同温度,pH,水力停留时间以及添加氮、磷营养盐等条件下微生物对废水COD_Cr去除的影响.结果表明:稠油废水中投加的外源微生物B0501提高了废水中COD_Cr的去除率;接种后,废水在30 ℃,pH为7.5,水力停留时间为216 h,添加氮、磷营养盐(ρ(氮)/ρ(磷)为5.63)的条件下,废水COD_Cr去除率大幅度提高,其ρ(COD_Cr)满足国家污水综合排放一级标准(GB 8798-1996).经形态观察和生理生化反应鉴定,菌株B0501为液化金杆菌(Aureobaterium liquefaciens).      

长江流域点源氮磷营养盐的排放、模型及预测

通过分析1985～2003年长江流域向河口/东海排放的点源营养盐的时空变化规律,建立长江点源营养盐排放模型,并预测2020年长江流域点源氮磷排放情况.模型基于人口密度、国内生产总值、人均氮磷排放量、以及污水处理率等因子,在99%的置信度上,氮磷模型的方差解释量分别达到92.3%及93.2%.基于此模型预测2020年长江流域点源氮排放量将达到(95 9±6 6)×104t,点源磷排放量达到(12.3±0.6)×104t.此外,研究结果进一步表明,点源营养盐通量仍然是长江输送营养盐总量的主要部分,是影响河口/近海水质的主要因素.     

曝气生物滤池快速启动和活性保持性能研究

研究了两级曝气生物滤池处理生活污水时各级的快速启动和在低负荷下活性保持的能力,考察了出水中主要污染物和生物滤池内生物量随时间的变化情况。结果表明,碳氧化生物滤池从低负荷恢复时,所需要的时间与活性保持时的负荷大小有关,负荷越小,所需要的时间越长。在极端情况下,恢复时间接近一次完全启动的时间,因此碳氧化生物滤池的低负荷维持并没有太大的实际意义。而硝化生物滤池在低负荷下活性保持良好,重新启动仅需要完全启动1/10的时间,这就有可能以低成本实现硝化生物滤池的活性保持。     

改良型Carrousel氧化沟工艺生物脱氮除磷效果研究

为了提高改良型Carrousel氧化沟工艺污水处理厂的脱氮除磷效果,结合某污水处理厂3年的运行实践,讨论了该工艺的处理效果,生物脱氮除磷原理及影响出水效果的因素.分析表明将DO控制在0.3～0.7 mg/L范围内,能够使出水中的TN浓度低于20 mg/L;在氧化沟中发生的同步硝化反硝化反应(SND)对总氮的去除的贡献占总系统脱氮的66%;该系统剩余污泥的含磷率为3.0%,生物细胞中平均含磷量可达细胞干重的4.2%;总磷去除率与污泥龄具有很好的线性关系,加大污泥排放量可以提高除磷效果.     

操作条件对超滤膜运行经济稳定性能的影响

采用正交实验的方法对棕榈油生产废水二级处理出水的超滤工艺条件进行考察和优化,并用膜通量衰减系数、平均跨膜压差及产水量各自加权相加所得综合指标来表征不同超滤操作条件下膜运行的经济稳定性能。正交试验结果表明,减小膜表面流速和产水率,提高处理废水温度均有利于系统经济稳定地运行;各运行参数对综合指标影响的大小顺序为:膜表面平均流速>产水率>温度;在保证出水质量的前提下,最佳组合操作条件为膜表面平均流速0.7m/s,产水率80%,废水温度30℃。     

好氧颗粒污泥在生物强化除磷中的应用

结合近年来好氧颗粒污泥的最新研究成果,分析了好氧颗粒污泥的物理、化学、生物学、结构特征,并从生物除磷、反硝化除磷和沉淀作用三方面对好氧颗粒污泥除磷现象进行探讨。旨在为好氧颗粒污泥在生物强化除磷中的实际应用提供理论知识。     

生物膜填料塔SO2废气净化性能研究

采用生物膜填料塔净化SO2废气,研究结果表明:当气体流量从100L/h增加到300L/h时,SO2净化效率由86.4%下降到73.2%;生化去除量随着入口SO2气体浓度的升高而增大;随着温度的升高,SO2净化效率和生化去除量都随之提高,且20℃以上时,净化效率可达90.9%以上,生化去除量可达75 mg/L·h以上,更利于微生物降解SO2.