焊接工艺多源散发的高温颗粒污染物扩散特性数值模拟

为探究热工艺过程产生的热气流作用下颗粒的迁移规律,基于气固两相离散粒子模型(DPM)对多源浮射流伴生的高温颗粒的扩散特性进行了数值研究,讨论了两相流运动过程中热气流与颗粒群的温度和速度的瞬时变化情况.结果表明,对于473K£T₀£673K的高温颗粒群,温度衰减趋势类似,颗粒群温度分布呈中心对称;当5μm£d_p£20μm时,颗粒与气流之间的跟随性随着粒径的增大而降低;热羽流随时间经历了独立发展和相互合并的过程,羽流之间涡旋结构的消失导致中心位污染源散发的d_p=10μm的颗粒更容易发生沉降.     

焙烧炉筒体结构强度有限元分析

对焙烧炉筒体结构进行有限元建模仿真,考虑热应力、压力和重力对筒体结构受力的影响,计算了焙烧炉关键部位的蠕变疲劳寿命,同时探究进气温度、保温层及对流系数等参数的影响。结果表明:热应力是影响结构强度的关键因素;焙烧炉筒体在许用蠕变变形量为5%的情况下,其使用寿命超过设计寿命;在筒体加热过渡段铺设保温层,降低与外界空气对流和提高进气温度,有利于降低筒体应力。     

SiO2气凝胶隔热性能的影响因素研究

目的 在不同热流条件下,通过调整SiO2气凝胶的孔隙率、涂层厚度等,以满足合适的隔热要求。方法 针对中短程飞行器飞行时外壁面承受短时高热流的特点,在分析孔隙率对SiO2气凝胶热导率影响规律的基础上,通过数值仿真研究不同气凝胶孔隙率、气凝胶厚度及热流作用下的温度响应。结果 得到了不同条件下满足隔热要求的气凝胶最小厚度,以及气凝胶表面的最高温度。高温情况下,气凝胶孔隙率为96%时,有效热导率最低,孔隙率超过96%时,隔热性能变差。结论 当飞行器内壁面温度满足要求时,增大气凝胶的孔隙率,则需要减小气凝胶的厚度,相应的气凝胶表面温度会升高,但升幅很小。当飞行器外壁面承受长时间大热流时,仅调整气凝胶的厚度和孔隙率不能达到结构的隔热要求。     

Creating False Images: Stream Restoration in an Urban Setting

Stream restoration has become a multibillion dollar business with mixed results as to its efficacy. This case study utilizes pre‐ and post‐monitoring data from restoration projects on an urban stream to assess how well stream conditions, publicly stated project goals, and project implementation align. Our research confirms previous studies showing little communication among academic researchers and restoration practitioners as well as provides further evidence that restoration efforts tend to focus on small‐scale, specific sites without considering broader land use patterns. This study advances our understanding of restoration by documenting that although improving ecological conditions is a stated goal for restoration projects, the implemented measures are not always focused on those issues that are the most ecologically salient. What these projects have accomplished is to protect the built environment and promote positive public perception. We argue that these disconnects among publicized goals for restoration, the implemented features, and actual stream conditions may create a false image of what an ecologically stable stream looks like and therefore perpetuate a false sense of optimism about the feasibility of restoring urban streams.     

探讨ADC芯片引脚与印制板之间的固封方式

通过故障分析,将某产品高温老炼试验过程中发生的性能异常现象定位于ADC芯片部分引脚焊点脱焊。为验证芯片引脚与印制板之间的固封方式对焊点受力的影响,分别对"底部灌封+四角固封"及"底部灌封+四边固封"固封方式进行试验验证及随机振动、热应力分析。根据分析结果,高温浸泡时"底部灌封+四边固封"方式下,焊点受力均匀,最大热应力低于3MPa;而"底部灌封+四角固封"固封方式下的焊点最大热应力约5.1MPa,导致了焊点的蠕变疲劳失效。为减少高温浸泡时焊点的热应力,设计了"底部不灌胶,四边固封但一角不封口"的固封方式,并顺利通过相应的验证试验,证明这是一种较为妥当的固封方式。     

变压器发热试验自动测试平台的开发

研究开发了变压器认证标准GB19212．1（IEC 61558－1）中发热试验项目的自动测试平台,详细叙述了试验操作过程、自动测试平台的软硬件结构,继电器控制模块组成与硬件设计,以及虚拟仪器软件实现流程。该平台可显著减少检测人员的在线工作时间,并行测试可提高设备使用率,同时相比之前的手动测试,可明显降低人工测量部分的不确定度。     

基于LabVIEW的变压器绕组发热试验自动测试软件

遵照变压器认证标准GB19212．1（IEC 61558－1）中型式试验的关键项目一发热试验的一般要求,针对试验中最广泛使用的热阻法,并使用常见的离线测试方式和经验公式代入计算法,编写了一套基于LabVIEW开发环境的自动测试软件,构建以图形化软件为核心的下一代自动化测试系统。     

考虑“双碳”目标与健康损失的区域现役火电机组有序退役研究

火电行业是我国经济社会发展的重要基础和保障，但也是碳排放的主要源头之一。在“双碳”目标约束下，新能源装机将持续增长，而火电机组则面临降碳和退役的压力。以安徽省为研究区域，考虑“双碳”目标与污染导致的健康损失等因素，对全省现役火电机组的计划退役与有序退役方案进行对比分析，为火电行业实现低碳发展提供路径参考。在有序退役方案下，结合初始投资、使用年限、年度发电收益与污染物排放计算出现役机组每年的净现值，并且根据未来安徽省碳排放削减目标，得到优化后的机组退役时间和顺序。结果表明：与常规的计划退役方案相比，有序退役方案使安徽省火电机组退役时间平均提前约5 a，在2060年碳中和之前可实现现役机组全部退役。2020—2060年，现役机组有序退役可累计减少碳排放量12.76亿t；累计减少SO₂、NO_x、PM_2.5排放量分别为1.44万t、2.13万t、0.17万t，比计划退役方案减少8.66亿元的健康损失。机组的有序退役不仅能带来巨大的环境效益与社会效益，也为“双碳”目标的实现提供了有力保障。     

The role of interactions between individual animals in the response to heat stress in the freshwater crustacean <Emphasis Type="Italic">Daphnia magna</Emphasis>

The thermal resistance of Daphnia magna Straus is a trait depending on the interaction between individuals. The group effect is expressed in D. magna as both a decrease in thermal resistance and a marked individual differentiation with respect to thermal resistance. Two types of interactions between individual D. magna have been found: (1) the release of an unidentified factor decreasing thermal resistance (without noticeably changing the phenotypic variability of this trait) into the medium and (2) a decrease in the thermal resistance of individuals poorly adapted to heat stress, with the thermal resistance of well-adapted individuals (determined by the dependence of thermal resistance on interactions between individuals) remaining the same or even slightly increasing.Translated from Ekologiya, No. 2, 2005, pp. 126–131.Original Russian Text Copyright © 2005 by Kalinnikova, Krasnoperova, T. Gainutdinov, Sadykova, M. Gainutdinov.     

Nanocomposites of Cellulose Acetate Butyrate Reinforced with Cellulose Nanocrystals

Nanocrystals were prepared by acid hydrolysis of bacterial cellulose microfibrils. These were topochemically trimethylsilylated, in an attempt to reduce their hydrophilicity. Composites were made by dispersing either native or silylated crystals in cellulose acetatebutyrate matrixes and solution casting of the dispersions. Particles were characterized by transmission electron microscopy. The composites were characterized by differential scanning calorimetry and dynamic mechanical analysis. The unmodified cellulose crystals exhibited better reinforcement characteristics than the trimethylsilated crystals.