ABR工艺预处理木薯酒糟废水的工程应用

木薯酒糟废水有机物浓度高、悬浮物含量大、pH呈酸性、可生化性能较差 ,通常直接采用固液分离—厌氧 (UASB)—好氧曝气生化法处理效果并不理想 ,而采用ABR工艺进行厌氧水解酸化预处理木薯酒糟废水迄今为止未见报道。经绵阳市酒厂废水治理工程证明 ,强化ABR预处理工序是保证后续处理措施能否正常运行的关键     

Degradation of Populus euphratica community in the lower reaches of the Tarim River, Xinjiang, China

IntroductionRiparian systems are aquatic-terrestrial ecotones withunique biotic , biophysical and landscape characteristics(Gregory, 1991 ; Naiman, 1997 ; Wiens , 2002) and areshaped by fluvial geomorphic processes . Riparian plantcommunities perform an i…     

Petro-chemical wastewater treatment by biological process

Ｉｎｔｈｅｃｏｕｒｓｅｏｆｏｉｌｒｅｆｉｎｉｎｇ,ｏｒｇａｎｉｃｗａｓｔｅｗａｔｅｒｗｉｔｈｈｉｇｈｃｏｎｃｅｎｔｒａｔｉｏｎｏｆｅｍｕｌｓｉｆｉｅｄｏｉｌａｎｄｐｈｅｎｏｌｉｓｐｒｏｄｕｃｅｄ,ｓｏｆａｒ,ｔｈｅｍｅｔｈｏｄｓｏｆｐｈｙｓｉｃｏｃｈｅ?..     

水中酚类有机污染物HPLC分析及其应用

超声辐照技术降解水中有机污染物，其降解效率的主平价需要简单、快捷和精确的分析方法。为此研究了5种优先控制酚类污染物的HPLC分离及定量分析方法，方法的定量范围为0.4-100mg/L，检测限介于0.34-0.79ng/μL。4－氯酚的超声降解实验表明，随着反应溶液中4－氯酚初始浓度的降低，降解效率明显提高，因此该方法适用于超声降解过程中酚类污染物的跟踪测定。     

切割钢渣活化过硫酸盐降解偶氮类染料酸性红73

切割钢渣是钢铁生产过程中的固体废弃物,如何有效处理和利用这些废渣具有减少环境污染、实现废物资源化的重要意义.本文选择河北邢台钢铁厂中切割钢渣为过硫酸盐(PS)活化剂,活化过硫酸盐(PS)去除水相中偶氮染料酸性红73(AR73),实验表明,25 mg·L~(-1) AR73在15 min内,其降解率为99.9%,TOC矿化率达58.6%.同时考察了钢渣投入量、PS浓度、初始pH值等影响因素对AR73降解效率的影响:随着PS浓度、钢渣投入量的增加,AR73的降解速率也逐渐增加;在pH为3～9时,AR73均可被有效去除,酸性条件更有利于AR73的去除.活性自由基猝灭实验表明,酸性红73的降解是通过自由基和非自由基两种机制实现的,且钢渣可多次回收重复利用.钢渣活化PS技术,还可有效去除蒽醌类染料(活性蓝19),其去除率为99.9%,矿化率可达92.0%;同时该技术对某印染废水(COD_(Cr)=5625 mg·L~(-1))的去除率达49.9%.本文所构建的切割钢渣活化过硫酸盐(PS)技术可应用于偶氮印染废水的处理,实现"以废治废"的目标.     

乙草胺、铜污染共存对土壤甲胺磷蚯蚓降解过程的影响研究

为揭示利用蚯蚓活动强化甲胺磷降解的可行性,采用了微宇宙培养方法,通过有蚯蚓和无蚯蚓的对比实验,考察了乙草胺和铜分别与甲胺磷共存条件下污染黑土中甲胺磷降解过程的动态变化.结果表明,无论是否加入蚯蚓,甲胺磷单一污染的土壤中甲胺磷的降解符合一级反应动力学规律;蚯蚓活动能促进甲胺磷降解过程的进行.土壤中乙草胺或铜与甲胺磷共存时,均明显地干扰了甲胺磷降解过程随时间的动态变化;根据化学结构分析,推测两者对甲胺磷降解规律的影响机制可能类似.铜与甲胺磷复合污染的土壤中甲胺磷含量明显高于乙草胺与甲胺磷复合组,说明铜较乙草胺对土壤甲胺磷降解过程的延缓作用更强.     

In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂⁻ and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.     

Environmental impact of China''''s village and township industry(1988-1992): a comparison with urban industry

１ＩｎｔｒｏｄｕｃｔｉｏｎＶｉｌａｇｅａｎｄｔｏｗｎｓｈｉｐｉｎｄｕｓｔｒｙ（ＶＴＩ）ｉｓｂｅｃｏｍｉｎｇａｖｅｒｙｉｍｐｏｒｔａｎｔｃｏｍｐｏｎｅｎｔｏｆＣｈｉｎａｓｅｃｏｎｏｍｙａｎｄｅｎｖｉｒｏｎｍｅｎｔ．Ｉｎ１９９２，ＶＴＩｐｒｏｄｕｃｅｄ...     

废水处理实用公式的推导计算

介绍由一级动力学模式推导废水处理实用公式。文中探讨了２０℃降解速率系数Ｋ２０和温度修正系数θ，仅是某种水质和生化条件下的对应值，不能任意通用。     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.