Structural effect on photocatalytic degradation of metallised azo dyes in aqueous TiO2 suspension

Three metallised azo dyes were investigated under TiO₂‐photocatalytic and photosensitised conditions in aqueous buffering solutions. The degradation follows apparent first‐order kinetics. The size and strength of intramolecular conjugation determine the light‐fastness of the investigated dyes. Compared with ¹O₂ produced in photosensitised process, the more powerful *OH radicals in TiCO₂ photocatalytic process are highly reactive towards the investigated azo dyes. And as a result, the TiO₂‐photocatalysis makes little less distinction in the degradation kinetic data of the azo dyes compared with the photosensitised degradation of them.     

负载型纳米Fe-Pd降解水溶性偶氮染料

采用阳离子交换树脂表面为载体,合成了负载型纳米Fe-Pd二元复合金属材料,采用扫描电子显微镜(SEM)和能谱分析对该材料进行表征,研究了其对一些水溶性偶氮染料的降解效果.实验表明,该材料对0.05 g.L-1甲基橙、日落黄、酸性橙8、金橙G和活性红2等偶氮染料有较好的降解效果,纳米双金属中Pd含量的增加有利于染料的降解;反应体系初始pH值对染料的降解率影响较大,本研究中,pH 4酸性条件下降解效果最佳;制备的材料在第10次活化后,仍有较好的降解效果;为环境中偶氮染料的降解提供了一种有效的方法.     

木耳菌糠生物炭对阳离子染料的吸附性能研究

为了有效处理印染废水,以废弃木耳菌糠（AG）为原料,采用限氧热解法在350、550、750℃的温度下制备木耳菌糠生物炭（AGBC）,处理含有孔雀石绿（MG）、番红花红T （ST）的有色废水.考察了不同初始pH值、吸附时间、初始浓度对AGBC吸附MG、ST的影响,讨论了吸附动力学及等温吸附特性.并利用傅里叶变换红外光谱（FTIR）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）等技术对吸附前后的菌糠生物炭进行表征,探究吸附机理.结果表明：随着热解温度的升高,吸附剂表面的含氧官能团数量逐渐减少,而比表面积和芳香化程度逐渐增加.MG的平衡吸附量随溶液pH值的升高而增大,而ST的平衡吸附量呈现相反趋势.AGBC对MG、ST的吸附分别在8h和4h基本达到平衡.AGBC对MG的吸附过程符合准一级动力学模型与Freundlich模型,说明吸附过程以物理吸附为主;对ST的吸附过程符合准二级动力学模型与Freundlich模型,说明吸附过程以化学吸附为主.与AG350和AG550相比,AG750对MG和ST的吸附量更高,经Langmuir模型拟合,其对MG和ST的最大吸附量分别为10249.79mg/g、3353.49mg/g.吸附机理表明,AGBC对MG的吸附主要为静电引力和π-π共轭作用,对ST的吸附主要为氢键作用、π-π共轭作用以及静电引力.说明AGBC对阳离子染料具有一定的吸附潜力,是一种经济高效的吸附材料.     

阴离子型聚丙烯酰胺相对分子质量和水解度对污泥脱水性能影响的研究

通过对污泥絮凝颗粒粒径分布、污泥比阻、泥饼含固率、上清液体积及其中核酸、蛋白质和总糖浓度的测定,研究了不同剂型和剂量阴离子型聚丙烯酰胺（PAM）对城市污泥沉降性能和脱水性能的影响及机制.结果表明,当PAM相对分子质量相同时,提高水解度能改善污泥的沉降和脱水性能;当PAM水解度相同时,提高相对分子质量亦可改善其沉降和脱水...     

Acid Orange 7 degradation using methane as the sole carbon source and electron donor

• AO7 degradation was coupled with anaerobic methane oxidation. • Higher concentration of AO7 inhibited the degradation. • The maximum removal rate of AO7 reached 280 mg/(L·d) in HfMBR. • ANME-2d dominated the microbial community in both batch reactor and HfMBR. • ANME-2d alone or synergistic with the partner bacteria played a significant role. Azo dyes are widely applied in the textile industry but are not entirely consumed during the dyeing process and can thus be discharged to the environment in wastewater. However, azo dyes can be degraded using various electron donors, and in this paper, Acid Orange 7 (AO7) degradation performance is investigated using methane (CH₄) as the sole electron donor. Methane has multiple sources and is readily available and inexpensive. Experiments using ¹³C-labeled isotopes showed that AO7 degradation was coupled with anaerobic oxidation of methane (AOM) and, subsequently, affected by the initial concentrations of AO7. Higher concentrations of AO7 could inhibit the activity of microorganisms, which was confirmed by the long-term performance of AO7 degradation, with maximum removal rates of 8.94 mg/(L·d) in a batch reactor and 280 mg/(L·d) in a hollow fiber membrane bioreactor (HfMBR). High-throughput sequencing using 16S rRNA genes showed that Candidatus Methanoperedens, affiliated to ANME-2d, dominated the microbial community in the batch reactor and HfMBR. Additionally, the relative abundance of Proteobacteria bacteria (Phenylobacterium, Pseudomonas, and Geothermobacter) improved after AO7 degradation. This outcome suggested that ANME-2d alone, or acting synergistically with partner bacteria, played a key role in the process of AO7 degradation coupled with AOM.     

Biodegradation of azo dyes by genetically engineered azoreductase

A azoreductase gene with 537 bp was obtained by PCR amplification from Rhodobacter sphaeroides ASI. 1737. The enzyme,with a molecular weight of 18.7 kD, was efficiently expressed in Escherichia coli and its biodegradation characteristics for azo dyes were investigated. Furthermore, the reaction kinetics and mechanism of azo dyes catalyzed by the genetically engineered azoreductase were studied in detail. The presence of a hydrazo-intermediate was identified, which provided a convincing evidence for the assumption that azo dyes were degraded via an incomplete reduction stage.     

铝镁氢氧化物溶胶吸附脱色性能的研究

对染料在具有永久正电荷的铝镁氢氧化物上的吸附,考察了铝镁比、染料类型、pH值等因素对吸附效果的影响,并进行了动力学、热力学研究结果表明,铝镁氢氧化物溶胶具有良好的脱色效果,铝镁比为1∶3的溶胶处理效果最佳;溶胶对大多数阴离子型染料的脱色率明显大于其它类型;染料的吸附量随pH值的增大而减小;溶胶对实验的各种阴离子型染料的饱和吸附量在961—3319mg·g-1之间;吸附量随温度升高而减小,说明吸附是放热过程     

电催化氧化法处理阴离子表面活性剂废水

采用自制电化学反应器对阴离了表面活性剂废水的电催化氧化处理进行了研究,考察了阳极材料、电解电压、电解时间、电极间距离、废水pH、废水电导率等对阴离子表面活性剂电解去除效果的影响,确定了最佳的处理条件。在电解电压为8V、电解时间为30～40min、电极间距离为2cm、废水pH为8～10、废水电导率为0．620ms／cm的条件下,阴离子表面活性剂的电解处理去除率可达96％以上。     

污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料,选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征,同时,研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明,制得的污泥吸附剂BET比表面积为358 m²/g,强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程,其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤,颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。     

RuO_2-IrO_2/Ti阳极电催化降解偶氮染料甲基橙模拟废水

以自制Ti基Ru O2-Ir O2镀层形稳电极为阳极,采用电催化氧化处理偶氮染料甲基橙模拟废水。以硫酸钠为支持电解质,在自然p H条件下分别考察了电解时间、电极间距、电流密度和电解质浓度等因素对甲基橙去除率的影响,并分析其原因。实验结果表明,在自然p H、电极间距为1.0 cm、电流密度为30.0 m A/cm2、电解质硫酸钠浓度为20.0 g/L、电解1.0h,甲基橙去除率高达90.0%以上。因此,电催化氧化法作为一种高效、简便的染料废水处理技术,具有一定的应用潜力。