乐山市臭氧生成与前体物之间的关系及其敏感性和控制分析

为初步了解乐山市臭氧生成的主要特征和科学管控,采用Pearson相关性分析法分析一年来臭氧及其前体物之间的相关性,并采用OBM模式和VOCS/NOX比值法分别讨论臭氧生成的敏感性和控制性特征.结果 表明:乐山市氮氧化物与臭氧在夏秋两季呈现正相关,在春冬两季呈负相关;从臭氧的敏感性分析得出臭氧生成潜势PO3-NO:夏季＞...     

生物降解高分子材料的研究现状及应用前景

目前,处理高分子材料的一些传统方法,如焚烧法、掩埋法、熔融共混挤出法、回收利用等都存在一定的缺陷和局限性,给环境保护带来严重的困难。因此,开发环境可接受的降解性高分子材料是解决环境污染的重要途径。生物降解高分子是指通过自然界或添加的微生物的化学作用,将高分子物质分解成小分子化合物,再进入自然的循环过程。论述了生物降解高分子材料的研究现状,并对生物降解高分子材料的降解机理、影响因素及其在医学、农业、包装业和其他领域的潜在应用前景进行了探讨。     

应用三种不同处理方法消解土壤的研究

本文采用3种不同的消解方法对环境土壤标准物质ESS-2和ESS-3进行处理,火焰原子分光光度法分别测定其中铜(Cu)、锌(Zn)元素的含量.3种消解方法为:电热板消解法、微波消解法和全自动消解法.分析测定结果探讨这3种消解方法的优缺点,以期获得最经济实效的消解手段.实验证明:微波消解法操作简便快捷、赶酸时间短、无污粢、准确度高、精密度好,因此提高了工作效率.     

ARE SOILS LIKE SPONGES?1

ABSTRACT: The purpose of this paper is to explore the validity of the old analogy that “soil is like a sponge.” Laboratory experiments were conducted to measure two hydrologic properties of porous media: drainage under gravity, and water potential curves. A tipping bucket rain gage connected to a data logger was used to measure the rate at which water drained under the force of gravity from a trough filled with four saturated porous media ‐ cellulose sponges, topsoil, peat, and a medium sand. Pressure plate techniques were used to determine water potential curves for soil materials and sponges. In terms of relative cumulative discharge from the trough, sponges were intermediate between peat and topsoil. Because of their tremendous water‐holding capacity, sponges discharged more than 2.5 times as much water as did peat. The water potential curve for sponges was fairly flat, like that of topsoil, but the high water content across all pressures (0.30–15.0 bars) indicated some similarity to peat. The results of these experiments suggest that the general patterns of water retention and release in soil materials and sponges are similar and vary only in degree.     

WASTE WATER DISPOSAL THROUGH A COASTAL AQUIFER1

ABSTRACT: Feasibility of disposing treated sewage in wells sunk into a partially confined coastal limestone aquifer at Waimanalo in the island of Oahu was investigated using an electric analog model. Electric analog modeling was preferred over digital modeling because of ease with which tides could be generated at the ocean boundary in the form of sinusoidal waves. The results of model operation showed that high permeability, low storativity, and the presence of ocean render the Waimanalo aquifer highly suitable for the disposal of waste water in deep wells. Since the quality of water in the aquifer is already unsuitable for municipal, industrial, or agricultural use, waste water injection will not result in any loss of fresh water supply source to the island. It is also believed that the cost of waste water disposal through the aquifer will be considerably less than that through an ocean outfall. During model development it was discovered that electric analog models can help prepare certain graphs which can be useful for aquifer analysis without any further use of the model.     

环境监测信息网络建设思路的探讨

介绍了环境监测信息网络的组成、作用于流通范围,提出了环境监测信息的构架、环境数据库的设计原则、环境监测应用软件的开发思路,以及环境监测信息网络的管理与维护措施。     

河北省钢铁工业主要大气污染物减排潜力分析

通过对河北省钢铁工业存在问题的分析,得出我省钢铁行业主要大气污染物为二氧化硫和粉尘.结合我省钢铁企业的实际情况,从工程技术、政策管理等方面提出相应治理措施,并对"十一五"期间我省钢铁行业二氧化硫和粉尘减排效益进行预测.预测结果显示:采用所建议的减排措施后,我省钢铁工业二氧化硫减排量对全省"十一五"减排计划的贡献率为81.4%;粉尘可减排60%.     

Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

工业污水水质在线监测系统研究与推广应用

为了加强对污染源的监控,准确地掌握污染物排放情况,中国石油天然气股份有限公司组织开展了水质在线监测系统研究,并逐步建立了污染源在线监测系统。文章介绍了有关水质在线监测系统的研究现状以及研究成果应用和推广情况。     

出口小家电产品环境适应性试验中常见问题及分析

本文介绍了小家电产品在环境检测中常见的安全问题,分析其通常存在的不符合IEC标准的条款和产生的原因,提出了解决类似问题的措施,从而提高出口小家电产品的安全性能.