烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Determination of mercury and arsenic levels in fish caught in the Beheshtabad River,Chaharmahal and Bakhtiari Province,Iran

Mercury and arsenic pollution has been recognized as a potential environmental and public health problem for over 40 years. The major source of exposure to mercury for humans is the ingestion of fish. This study was conducted with the aim of determining the levels of mercury and arsenic in the muscles of four fish species caught in the Beheshtabad River and comparing the results with the maximum tolerance levels for mercury and arsenic. The samples of 90 fish were used for the determination of both the metals by graphite furnace atomic absorption spectrometry. The results showed that the concentrations ranged from 1.5 to 3.8 µg kg^?1 for mercury and from 35 to 70 µg kg^?1 for arsenic, with means of 2.7 ± 0.5 and 57 ± 12 µg kg^?1, respectively. Both mean levels were lower than the threshold limits acceptable by WHO standards.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Speciation of heavy metals in suspended particulates in urban air†

An anayltical procedure based on a sequential extraction scheme is applied to samples of suspended particulates from an urban area of Barcelona. This area presents high levels of air pollution owing to automotive emissions and industrial activity.

The procedure allows the partitioning of particulate trace metals into four fractions: soluble and exchangeable, bound to carbonates and iron‐manganese oxides, bound to organic matter and residual. In this work, the chemical associations of Fe, Pb, Cu, Mn, Cr and Cd have been investigated.

In the analysed samples, only the cadmium is predominantly in the first fraction whereas the other metals are largely associated to carbonates and Fe‐Mn oxides.     

SDA脱硫工艺在烧结烟气脱硫中的应用

介绍了沙钢集团4号360 m2烧结机全烟气脱硫项目的工艺选择、脱硫原理、工艺流程及投产后生产情况,通过对生产后运行分析,认为旋转喷雾干燥法(SDA)作为一种新型的脱硫工艺,适合作为烧结烟气脱硫的主工艺进行推广。     

大鹏湾中溶解态总氮和总磷的多年调查结果分析

依据2000—2010年每月1次的调查资料,简要描述和讨论大鹏湾海水中溶解态总氮（DTN）和溶解态总磷（DTP）质量浓度的空间分布和时间变化。结果表明由于受到香港和深圳陆源排放的影响,DTN和DTP质量浓度在吐露港和沙头角附近水域1年4季都较高。DTN和DTP的平均质量浓度分别为0.21和0.03 mg.L-1,比溶解态无机氮（DIN）和溶解态无机磷（DIP）的高1倍以上,表明大鹏湾海水中溶解态有机氮（DON）和溶解态有机磷（DOP）分别是DTN和DTP的主要赋存形态。平均DTN/DTP原子比〉16,反映了大鹏湾海水中磷可能是海洋浮游生物生长繁殖的限制因素。夏季,由于南海北部陆架低温、高盐和高营养盐底层水潜入湾内,底层DTN和DTP质量浓度明显高于其他季节。11年调查期间,DTN质量浓度的年际变化趋势平稳,DTP质量浓度的年际变化呈较明显的下降趋势,而DTN/DTP原子比的年际变化呈较明显的上升趋势。     

可再生胺法用于烟道气脱硫吸收解吸一体化的研究

以乙二胺-磷酸为吸收脱硫剂,用自制填料塔作为气液相传质设备,对烟道气中的SO2气体进行脱除和再生实验,通过间歇实验和全连续两种操作工艺,研究了一系列单因素实验,考察了乙二胺浓度、液气比、吸收液初始pH、解吸塔底是否通空气以及温度等对实验吸收率和解吸率的影响,最后得到最佳的工艺操作条件:解吸时塔底通空气,乙二胺浓度0.3～0.4 mol/L,吸收液初始pH=7.3～8.0,液气比L/G=1.0,解吸温度为100℃。     

一种pH荧光特性物质的合成及其特性研究

合成并表征了化合物:N,N'-二苯丙氨酸铵-3,4,9,10-苝四羧酸二酰亚胺(PDCDA).研究了pH值变化对其水溶液可见吸收光谱和荧光发射光谱的影响,探讨了荧光强度变化的机理,并利用PDCDA构建了具有“开-关”特性的pH荧光传感器.结果表明,PDCDA化合物水溶性好、荧光量子产率高,荧光强度与pH值间有着强烈的依赖关系,在碱性及中性溶液中荧光强度较强且稳定,而在酸性溶液中荧光被淬灭,PDCDA在一个非常窄的pH范围内荧光强度发生了明显的变化, pH值的改变对发光团π-π堆积产生影响进而导致其荧光发射光谱和可见吸收光谱发生改变.PDCDA可用作水溶液的pH荧光传感器,检测pH值范围为3.8~6.3.