粤港澳大湾区典型化工场地苯系物污染特征及迁移规律

以粤港澳大湾区某典型化工污染场地为例,共采集了247个土壤样品和20个地下水样品,探讨了场地苯系物的污染分布特征,利用GMS分别从水平和垂直方向模拟分析了该场地苯系物在土壤与地下水的污染迁移扩散规律.结果表明,场地土壤样品中苯、乙苯、间,对-二甲苯、邻-二甲苯超筛选值,其中苯系物超筛选值的土壤样品主要集中在0. 5～4 m深度范围;地下水样品中苯、乙苯、间,对-二甲苯和邻-二甲苯超标较严重,最大超标倍数分别为140. 00、101. 33、212. 00和103. 40倍,主要分布在浅层地下水.地下水中的苯污染物在水平方向主要以对流/弥散运移方式从西北往东南方向迁移,而在垂向上浮苯主要集中在地下水面处,溶解态苯主要在水动力作用下迁移.模拟验证分析结果表明,MT3D模型能较准确地反映场地苯系物的空间分布和迁移特征,可为粤港澳大湾区化工类污染场地的精准化管控与修复提供科学指导.     

中国加油站VOC排放污染现状及控制

应用排放因子法估算了2002年度全国加油站VOC的排放量.在综合考虑经济,社会,人口等各方面因素后,通过调整现有的活动水平估算了未来20a内全国的燃油消耗情况,以及VOC排放的增长趋势.结果表明:2002年我国加油站VOC排放量为187.6×10³t,由此造成的经济损失达到了7.5×10⁸元人民币.在维持现有控制水平情况下,到2030年VOC排放量将达到1196×10³t,经济损失高达47.8×10⁸元人民币.比较了StageⅠ、StageⅡ油气回收系统以及ORVR的回收效率和成本,并对其可行性和经济适用性进行分析.结果表明:这3种回收技术的引进将会大规模的消减加油站VOC的排放,并且选择性的措施组合能够取得更好的效果.相对于StageⅡ回收系统,ORVR的效率更高费用更低.但是ORVR的引进需要比StageⅡ更长的时间,为了达到80%的普及率至少需要11a左右.为在短期内达到一定的控制要求,可优先考虑StageⅡ回收技术;但是从长期的环境和经济效应来看,ORVR才是最终的选择.     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。     

Thermodynamic method for the prediction of solid CO2 formation from multicomponent mixtures

The increase in GHG concentration has a direct effect on global climate conditions. Among the possible technologies to mitigate GHG emissions, CCS is being accepted to gain emission reduction. Such technology also involves cryogenic CO₂ capture processes based on CO₂ freeze-out or where the formation of solid CO₂ must be avoided. Captured CO₂ is usually transported in pipelines for the reinjection.The risk associated to the release of CO₂ is due to the changing temperatures and pressures the system may experience, which can lead to the deposition of solid CO₂ where it must be avoided. Prolonged exposure to dry ice can cause severe skin damage and its resublimation could pose a danger of hypercapnia. It is, thus, necessary to build up a tool able to predict the conditions in which CO₂ can freeze-out.A thermodynamic methodology based on cubic EoSs has been developed which is able to predict solid–liquid–vapor equilibrium of CO₂ mixtures with n-alkanes or H₂S which are usually found in equipment for acidic gas, mainly natural gas, treatment.The focus is a detailed analysis of the method performances when more than two components are present since, for such a case, literature does not provide significant modeling results.     

Influence of manufacturing process on the residues of certain fungicides used on tea

Green tea shoots which were sprayed with fungicides such as hexaconazole, propiconazole, carbendazim, and tridemorph were collected from tea bushes after 24 h of fungicide application to study the effect of manufacturing process on the residues. Significant loss of residues was noted at each stage of the manufacturing process. The total loss in residues upon manufacturing of these fungicides ranged from 12.20% to 57.14%. Among the various influential factors that determine the loss of residues, vapor pressure of the fungicides was most prominent in the contribution to residue loss. A high vapor pressure of the fungicide tridemorph amounted to a residue loss of 57.14%, while the low vapor pressure of the other three fungicides caused a loss of less than 22.22%.     

Predicting the acute lethality of a chlorinated benzene mixture in soils: a comparison of solid-phase microextraction,body residue,and solvent extraction techniques

When predicting the adverse effect(s) of chemical pollution on an exposed organism, a measurement of body residue is often considered a more accurate estimate of dose than those estimates derived from a solvent extraction or solid-phase microextraction of the polluted exposure medium. The magnitude of this perceived difference in accuracy, and thus the accuracy of the corresponding toxicity prediction, were investigated in the present two-phase study. In Phase I, an acute lethality response was correlated with dose estimates derived from body residue, solvent extraction, and SPME. In Phase II, acute lethality was predicted from Phase I data. The accuracy of Phase II toxicity predictions was determined by comparing predicted mortality to observed mortality. Although this study revealed that body residue indeed provided the most accurate prediction of toxicity, the margin of this comparatively greater accuracy suggests that alternative methods may provide equally viable dose estimates and, subsequently, equally viable toxicity predictions.     

黑河流域水汽输送及收支特征

利用NCEP/NCAR逐日再分析资料对黑河流域的水汽输送和收支特征进行了计算分析,结果表明:西风环流使得源于大西洋和北冰洋的水汽成为黑河流域空中水汽的主要来源,流域内水汽输送以自西向东的纬向输送为主,东边界输出强度强于西边界输入强度,纬向净输入量为负;经向输送为自北向南且在强度上不及纬向输送,北边界输入强度强于南边界输出强度,经向净输入量为正。700 hPa气层流域南部的水汽辐合辐散特征随季节变化显著,冬季为水汽辐散区,夏季为水汽辐合区;流域北部没有明显的水汽辐合辐散特征。全流域多年平均水汽输入量为997.3 km³,输出量为1 046.1 km³,净输入量-48.8 km³,20世纪60年代中期以后流域水汽净输入量呈现增加趋势。黑河流域北部荒漠区年内各季均为水汽输出期,中低层大气(地面~500 hPa)为主要的水汽输出层;南部山区年内6-9月为水汽输入期,低层大气(地面~700 hPa)为水汽输入层,中高层大气(700~300 hPa)为水汽输出层。据大气水平衡原理,黑河流域多年平均蒸发量约为84 km³。     

土壤理化性质对污染场地环境风险不确定性的影响

以某化工污染场地中挥发性有机物苯的环境风险评价为例,研究了土壤有机质含量、土壤含水率、土壤容重等理化性质对风险评价结果的影响.在土壤污染物苯浓度不变的前提下,土壤有机质含量、土壤含水率和土壤容重在场地条件下随机取值的变异范围分别为0.31%～2.31%、0.12～0.25和1.25～1.75 g/cm3.10 000次蒙特卡罗模拟结果表明,在95%置信水平下,苯的总致癌风险(概率值)在1.45×10-5～2.74×10-5之间.在该场地条件下,土壤有机质含量是影响苯风险不确定性的最主要因素,其对风险评价结果不确定性的贡献率高达90.2%;土壤含水率和土壤容重的贡献率分别为5.6%和4.2%.因此,在土壤污染健康风险评价过程中,应对理化参数进行敏感性分析,对评价结果影响较大的关键参数取值需慎重.      

响应面法优化阴阳极同时作用电化学法处理染料废水

在自制电化学反应器中,以甲基橙模拟染料废水为处理对象,采用Box-Behnken Design响应面法研究了影响阴阳极同时作用电化学法处理染料废水的因素及其交互作用。实验得出各因素对废水脱色率影响的大小顺序为：电流密度> Fe³⁺浓度>Cl^-浓度。各因素之间的交互作用对废水脱色率影响的大小顺序为：电流密度和Fe³⁺浓度>电流密度和Cl^-浓度>Fe³⁺浓度和Cl^-浓度。优化结果表明：Fe³⁺浓度为1.02 mmol/L、Cl^-浓度为10.96 mmol/L、电流密度为11.52 mA/cm²时,最佳脱色率为94.67%。阴阳极同时作用电化学法对甲基橙去除效果显著。     

油污染土壤气体抽排去污模型及影响因素

为了开展适合我国实际情况的有机污染土壤气体抽排净化技术研究,在对油污染土壤的通风去污过程机理进行分析的基础上,建立了一个简化机理模拟模型.以华北地区典型土壤为实验土样,油污染物为例,通过一维土柱实验,研究了抽排气体流速、土壤含水率和土质对去污过程的影响.实验表明抽排气体流速存在最佳值,土壤含水率对不同土质土壤净化时间影响不同,对粉砂土,含水率升高,净化效率增强;而对粘质土壤,结果正好相反.对模型预测结果进行实验验证表明,本文建立的模拟模型在实验限定条件范围内是准确和适用的.