堆制处理过程中的多环芳烃降解

用实验室模拟方法,研究了堆制处理过程对污染土壤中４ ～６ 环的多环芳烃（ＰＡＨｓ） 的降解． 结果表明,堆制对６ 种难降解的ＰＡＨｓ 都有不同程度的降解作用,ＰＡＨｓ 的降解随着苯环数的增加而降低,其去除率的大小顺序为荧蒽＞ 苯并［ａ］ 蒽、苯并［ａ］ 芘＞ 苯并［ｂ］ 荧蒽、苯并［ｋ］ 荧蒽＞ 苯并［ｇｈｉ］ 北． 其中,荧蒽的去除率为４６．０ ％ ～９２．９％ ;苯并［ａ］ 蒽的去除率为７．７％ ～３７ ．２ ％ ． 当ＰＡＨｓ 的初始浓度提高约５０ 倍时,除荧蒽外其它ＰＡＨｓ 的降解随着污染浓度的提高而降低． 不同Ｃ／Ｎ均有类似的规律,但Ｃ／Ｎ２５：１ 比Ｃ／Ｎ４０：１ 为好． 堆中各种ＰＡＨｓ 浓度在高温期以前都有所提高,但在降温期以后又有不同程度的降低． 细菌总数测定表明,数量变化呈双峰型．     

乙酸钙不动杆菌对富营养化景观水体的净化作用

利用乙酸钙不动杆菌(Acinetobacter calcoaceticus),在室内采用投菌法对富营养化景观水体进行预处理试验研究.通过不同的投菌量ф=0.05×10-3、0.1×10-3、0.2×10-3,对水体进行处理,结果表明,乙酸钙不动杆菌对富营养化水体中的总氮(TN)、总磷(TP)、CODcr,均有一定的去除效果,其中在投菌量为O.1×10-3时处理效果最好.通过进一步的连续投菌净化试验,水体中的TN、TP、CODcr显著降低,处理后,水体中叶绿素a的质量浓度为19.1 mg·m-3,去除率为83.7%,藻类基本得到控制.由此可见,乙酸钙不动杆菌能够有效性地去除水体中的有机物、氮、磷,因此具有净化富营养化水体的作用.     

Combination of the direct electro-Fenton process and bioremediation for the treatment of pyrene-contaminated soil in a slurry reactor

A combined treatment technology (DEF-BIO) using the direct electro-Fenton (DEF) process and bioremediation (BIO) was established in this study. The performance of the DEF-BIO process on the remediation of a pyrene (PYR)-contaminated soil was evaluated in a slurry reactor. The appropriate order of application was to conduct the DEF process followed by BIO, evaluated through analysis of the degradation characteristics of each process individually. In addition, the application time of the DEF process affected the efficiency of the combined process. The optimum time to apply the DEF process was determined through an analysis of the induced changes in PYR intermediates, pH, soil organic matter (SOM) and bacteria. The optimum application time of the DEF process was 6 h. All the induced changes were beneficial for the BIO phase. The removal of PYR was 91.02% for DEF–BIO after 72 h, and the efficiency was almost 50% increased, compared with the individual DEF and BIO treatments. Therefore, the combined process of DEF–BIO process may be an efficient and promising method for the remediation.     

Phytoremediation of petroleum-contaminated soils: Pre-screening for suitable plants and rhizospheral fungi

A field study was conducted in a petroleum-contaminated site in Kermanshah refinery (Iran) to find the petroleum-resistant plant species and the rhizospheral fungi for being used in bioremediation. Results showed that the amounts of petroleum pollution in non-vegetated areas is 6.8% and in vegetated areas is 2.2%. Plant samples were collected from petroleum-polluted areas and determined using morphological characters. It was found that eight plant species were growing on the contaminated sites: Polygonum aviculare, Amaranthus retroflexus, Noea mucronata, Alhaji cameleron, Crozophora heirosolymitrana, Poa sp., Convolvulus arvensis and Trifolium repense. The rhizospheral fungi of the plants were collected and determined using microscopic studies and taxonomical keys. The results determined the presence of 21 species in the rhizosphere of the plants growing in the polluted areas; three of these species were common in all of the plants and the others have species-specific distribution within the plants. The highest number of rhizospheral fungi (11 species) were determined for P. aviculare in non-polluted areas and nine species in polluted areas. It seems that the plant is the best candidate for using phytoremediation. However, the variation of fungi in petroleum-polluted areas was more than non-polluted zones. The culture of fungi in oil-contaminated media showed that, although all the studied fungi were resistant to low petroleum pollution (1% v/v), a few species, especially Fusarium species, showed higher resistance to petroleum pollution (10% v/v) and hence they may be suitable for mycoremediation in highly polluted areas.     

环境样品中汞形态分析技术的进展

汞的毒性、环境行为、生物有效性不仅跟其浓度有关,还决定于其化学形态,因此汞的形态分析在环境科学中具有重要意义。样品前处理几乎是汞形态分析研究中不可或缺的步骤,而色谱和光谱/质谱联用技术是目前普遍采用的分离检测方法。文章对近十年来这些方面的研究进展进行了综述,主要包括样品的前处理方法如酸/碱溶剂萃取、微波辅助萃取、固相萃取、固相微萃取、单滴微萃取、分散液液微萃取等,以及色谱（液相色谱、气相色谱）和毛细管电泳与光谱/质谱（紫外可见光谱、原子吸收光谱、原子荧光光谱、等离子体质谱等）的联用技术在汞化合物形态分析中的应用情况。最后提出今后应重点研究建立高效、简便的前处理方法,发展高分离度、高灵敏度、高速度的分离检测联用技术,以便更好地对汞的形态进行分析监测。     

水产养殖自身污染及其生物修复技术

介绍了生物修复的概念、水产养殖存在的自身污染问题及其主要生物修复技术.营养物污染、药物污染和底泥富集污染是水产养殖存在的主要自身污染问题;微生物修复、水生植物修复和水生动物修复是污染养殖水域生物修复的3种主要形式;微生物的有效性、生物入侵、二次污染、修复生物的季节性和非水生植物的利用等方面是实施生物修复应注意的主要方面.最后指出,推行清洁生产、实行生态养殖是水产养殖业可持续发展的出路.     

Isolation and identification of fungi tolerant to polycyclic aromatic hydrocarbons and coal tar from different habitats in Lithuania

A group of 36 fungal strains, belonging to the Lithuanian mycobiota, was collected and isolated from different locations, habitats, and matrices, including creosote-treated wood in storage yards for crosstie wastes. The eight most perspective strains selected according to preliminary assessment of tolerance to coal tar were subsequently identified combining taxonomical evaluation and molecular techniques. The tolerance of the eight identified fungal species (five basidiomycetes and three ascomycetes) to the presence of various concentrations of coal tar, and for the four most perspective fungal strains (Pleurotus sp., Schizophyllum sp., Irpex lacteus, Bjerkandera adusta) to polycyclic aromatic hydrocarbons was evaluated. The ligninolytic enzymatic activity assay of the isolated strains resulted in a good correspondence between the tolerance to pollutants and the capability to produce ligninolytic enzymes indicating that this group of white-rot fungi is perspective for further investigation and eventual usage for mycoremediation of polycyclic aromatic hydrocarbons polluted substrates.     

2-巯基噻唑啉与过氧化氢酶的相互作用机理研究

2-巯基噻唑啉是一种被广泛应用的抗腐蚀剂和光亮剂,然而它的一些残留物会对环境造成损坏,为探究2-巯基噻唑啉的毒性作用,采用光谱学技术和分子对接技术来考察2-巯基噻唑啉和过氧化氢酶的相互作用影响,其中酶活性实验表明2-巯基噻唑啉会抑制过氧化氢酶的活性,分子对接结果显示2-巯基噻唑啉会结合在过氧化氢酶的活性位点处,并最终导致过氧化氢酶空间结构和微环境的变化,根据荧光测试结果,表明2-巯基噻唑啉和过氧化氢酶之间的猝灭方式为静态猝灭。通过测量不同温度下的结合位点数、结合常数以及热力学常数,显示2-巯基噻唑啉与过氧化氢酶主要通过氢键和范德华力相结合。该研究从分子水平上考察了2-巯基噻唑啉对蛋白质的毒性作用,对于阐明污染物的毒性机理具有重要意义。     

Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

Activated carbon (AC) can help overcome toxicity of pollutants to microbes and facilitate soil bioremediation. We used this approach to treat a Histosol and an Alluvial soil historically contaminated with PCB (4190 and 1585 mg kg⁻¹, respectively; primarily tri-, tetra- and pentachlorinated congeners). Results confirmed PCB persistence; reductions in PCB extractable from control and AC-amended soils were mostly due to a decrease in tri- and to some extent tetrachlorinated congeners as well as formation of a bound fraction. Mechanisms of PCB binding by soil and AC were different. In addition to microbial degradation of less chlorinated congeners, we postulate AC catalyzed dechlorination of higher chlorinated congeners. A large decrease in bioavailable PCB in AC-amended soils was demonstrated by greater clover germination and biomass. Phytotoxicity was low in treated soils but remained high in untreated soils for the duration of a 39-month experiment. These observations indicate the utility of AC for remediation of soils historically contaminated with PCB.     

A risk-estimation methodological framework using quantitative assessment techniques and real accidents’ data: Application in an aluminum extrusion industry

The risk estimation presumably is the most crucial part of the entire procedure of assessing hazards/unsafe situations in the work, and especially in the industries’ and constructions’ worksites, where the working conditions are unstable. We can consider the risk as a quantity, which can be estimated and expressed by a mathematical relation, under the help of real accidents’ data. The aim of this work is quadruplicate: (a) the development, elaboration and explanation of two new quantitative risk-assessment techniques, (b) the improvement of specific points of other scientific works, as far as concerns quantitative risk estimation, (c) the application of these techniques on an industrial productive procedure (as a case study) and (d) the comparison of their outcome risk-estimation results. Particularly, we develop and analyze the theoretical background of the two techniques, which we call as “proportional technique” and “decision matrix technique”, and apply them on an aluminum extrusion industry's worksite, which is situated in Greece, by using real data of potential sources of hazards, recorded by safety managers, during the 5.5-year time period of 1999–2004. Comparing the results of the two quantitative risk-assessment techniques, we infer that they are compatible. Therefore, the most important hazard source in the aluminum industry is the “squeezing and hits by dropping objects (transported by derricks)”, and imposes that immediate suppressive measures must be taken place to abolish the danger source.