高温ASBR处理水热改性污泥的工艺特性

采用高温ASBR处理水热改性污泥.结果表明,高温ASBR处理水热改性污泥的有机负荷(COD)由7.762kg/(m3·d)提升到13.106kg/(m3·d)后,会导致反应器内VFA的积累,pH和产气量的下降,反应器出现"酸化"现象.这种酸化现象属可恢复性酸化.系统恢复后,ASBR的有机负荷(COD)能达到10kg/(m3·d).高温ASBR在有机负荷(COD)为2.523、4.196、7.762、10.091kg/(m3·d)时的产气率(CH4/COD投入)分别为250、247、219、187mL.高温ASBR的有机负荷OLR与产甲烷速率MPR和COD产气率之间都呈现良好的线性关系,随着OLR的增加,产甲烷速率增大,COD产气率减少.     

Coordinability and consistency: Application of systems theory to accident causation and prevention

Recent works in the safety literature report several fruitful attempts to introduce mathematically rigorous results from systems and control theory to bear upon accident prevention and system safety. Previously, we discussed the implications on safety of the systems theoretic principles of coordinability and consistency, and we identified the lack of coordinability and/or consistency as fundamental failure modes in hierarchical multilevel systems. In this work, we further develop system safety analysis techniques based on these principles. We demonstrate that these principles not only provide a domain-independent vocabulary for expressing the results of post-mortem accident analyses, but they can also be applied to guide design and operational choices for accident prevention and system safety. We develop these ideas with the help of an illustrative case study. This case study represents a broad class of systems where operational policies and procedures of individual stakeholders in the system interact with physical processes such that new system behaviors emerge, and unanticipated safety issues arise. We argue, and illustrate our arguments using this case study, that the coordinability and consistency principles can be developed to deliver a threefold impact on accident analysis and prevention: firstly, these principles provide domain-independent procedural templates and vocabulary for post-mortem accident analysis. Secondly, these principles provide theoretical safety specifications to be met during system design and operation. Finally, these safety specifications can precipitate the formulation of a series of questions directly related to safety-oriented choices in the design, operation, and control of systems.     

生物活性炭塔中有机物沿程降解规律和降解动力学模型

上流式曝气生物活性炭塔(BAC)中的废水、空气从下往上流过生物活性炭层。为研究废水中有机物沿活性炭层的降解规律,生物活性炭塔由下至上共设有10个废水取样口,研究沿程各区间段对有机物的降解差异。试验结果表明在水力负荷为5.02~10.04 L/(m2·min),气水比为4∶1~6∶1时,COD、UV、色度的脱除主要集中在塔的中下部,占总脱除率70%以上。进水废水浓度对脱色率影响不大,对COD的脱除率有影响,进水废水浓度过大,脱除率降低。依据推流反应器模型,推导出废水净化塔中COD的降解动力学方程:Ce=Coexp(-2.406 4 H/L0.962)。     

新型双循环厌氧反应器的设计与水力特性研究

结合IC与EGSB的特点,同时根据厌氧处理理论,设计了新型双循环厌氧反应器,用于处理高浓度含有毒物质工业废水,并以Li Cl作为示踪剂,对该反应器不同水力停留时间(HRT)下的水力特性进行了研究。结果表明,在无循环时,各HRT下双循环厌氧反应器的C-θ曲线为不对称的单峰曲线。HRT为6,9,12 h时,反应器的死区比例分别为0.165,0.155,0.146。反应器呈推流流态,且随着HRT的增加,推流作用逐渐加强而完全混合作用逐渐减弱。当存在双循环时,在HRT为6,9,12 h的条件下,反应器第一反应区的σ2分别为0.249,0.179,0.113,第二反应区的σ2分别为0.135,0.112,0.106。双循环增大了反应器的返混程度,且与第一反应区相比,第二反应区更趋于推流式。     

不同乙酸钠/甘油比对好氧/延长闲置SBR除磷性能的影响

以合成废水为研究对象,以甘油和生活污水中常见的乙酸钠作为碳源,建立了5个好氧/延长闲置序批式反应器(乙酸钠/甘油比分别为1∶0、4∶1、1∶1、1∶4和0∶1),考察了各反应器长期运行过程中的除磷效果,并通过分析典型周期内磷及微生物体内各储能物质的变化,初步探究不同乙酸钠/甘油比对除磷性能的影响机理.研究表明,当乙酸钠/甘油比由1∶0逐渐降至4∶1和1∶1时,平均除磷率由90.1%升至92.5%、97.3%.乙酸钠/甘油比继续降至1∶4及0∶1时,系统除磷率降至65.7%、53.4%.当乙酸钠/甘油比为1∶1时,聚磷菌体内合成大量聚羟基脂肪酸酯(PHAs)(2.55 mmol·g-1,以每g VSS积累的C(mmol)计,下同),为后续磷的吸收及聚磷合成提供更多的能量,而以甘油作为单一碳源时,PHAs合成量最少(0.82 mmol·g-1),糖原合成量最大(2.56 mmol·g-1,以每g VSS积累的C(mmol)计).     

溶解氧对好氧/延长闲置SBR除磷性能的影响

以合成废水为研究对象,乙酸钠为外加碳源,考察不同溶解氧(DO)浓度下好氧/延长闲置(O/EI)序批式反应器的除磷效果,并通过分析典型周期内磷元素及微生物体内各储能物质的变化,探究DO浓度对O/EI工艺除磷性能的影响机制.结果表明,低DO浓度(1 mg·L-1)条件下,O/EI系统具有良好的除磷效果,除磷率高达96%,单位污泥除磷量为5.02 mg·g-1;而当DO浓度较高(4 mg·L-1)时,反应器内磷的去除率降至50%,单位污泥除磷量仅2.81 mg·g-1.研究表明,在DO浓度为1 mg·L-1时,微生物能合成较多聚羟基脂肪酸酯(PHAs),糖原的合成及利用较少,系统好氧吸磷量远高于其他反应器,并在闲置期释放出更多聚磷酸盐.可见,DO可通过影响微生物体内PHAs和糖原的合成及转化,闲置期释磷,好氧前期释磷及好氧吸磷,进而影响系统的除磷性能.     

Water treatment sludge for phosphate removal from the effluent of UASB reactor treating municipal wastewater

Aluminium-based water treatment sludge was used as a coagulant for removing/recovering phosphate from the effluent of upflow anaerobic sludge blanket (UASB) reactor treating municipal wastewater. The effect of three variables, namely sludge dose, initial pH and fresh coagulant (poly-aluminium chloride, PACl) dose was studied using response surface methodology. About 87% phosphate removal could be obtained at the optimum conditions of sludge dose 13.8 g/L, initial pH 6, and fresh PACl dose 5.8 mg Al/L. In order to achieve a similar phosphate removal, a dose in the range of 30–40 mg Al/L of fresh PACl was required. The results suggest that water treatment sludge can be reused as a coagulant for post-treatment of UASB reactor effluent treating municipal wastewater and can be considered as a promising alternative for removing phosphate which can substantially reduce the consumption of fresh PACl. The sludge generated during this process could potentially be used in land application which results in recycling of phosphate.     

Steel slag carbonation in a flow-through reactor system: The role of fluid-flux

Steel production is currently the largest industrial source of atmospheric CO₂. As annual steel production continues to grow, the need for effective methods of reducing its carbon footprint increases correspondingly. The carbonation of the calcium-bearing phases in steel slag generated during basic oxygen furnace (BOF) steel production, in particular its major constituent, larnite {Ca₂SiO₄}, which is a structural analogue of olivine {(MgFe)₂SiO₄}, the main mineral subjected to natural carbonation in peridotites, offers the potential to offset some of these emissions. However, the controls on the nature and efficiency of steel slag carbonation are yet to be completely understood. Experiments were conducted exposing steel slag grains to a CO₂-H₂O mixture in both batch and flow-through reactors to investigate the impact of temperature, fluid flux, and reaction gradient on the dissolution and carbonation of steel slag. The results of these experiments show that dissolution and carbonation of BOF steel slag are more efficient in a flow-through reactor than in the batch reactors used in most previous studies. Moreover, they show that fluid flux needs to be optimized in addition to grain size, pressure, and temperature, in order to maximize the efficiency of carbonation. Based on these results, a two-stage reactor consisting of a high and a low fluid-flux chamber is proposed for CO₂ sequestration by steel slag carbonation, allowing dissolution of the slag and precipitation of calcium carbonate to occur within a single flow-through system.     

SBBR处理腈纶生产废水的实验研究

二甲基乙酰胺湿纺腈纶废水是含有难降解物质的化工废水,碳氮比低,水质波动大。采用序批式生物膜反应器对二甲基乙酰胺湿纺腈纶废水进行实验研究,结果表明:在工艺参数为曝气时间3 h,溶解氧4.5~5.5 mg/L,补充无机碳源碳酸氢钠0.5 mg/L,缺氧停留时间2 h的工况下,COD去处理率为75%,BOD为98%,TOC为70%,NH4+-N为94%,TN为80%,DMAC达到99%。     

上推流厌氧反应器连续干发酵猪粪产沼气试验研究

为解决猪粪连续干发酵存在的氨抑制和出料难等难题,在温度(25±2)℃、有机负荷为干物质(TS)4.44 g.(L.d)-1的条件下,采用上推流式厌氧反应器(UPAR)对猪粪进行连续干式发酵试验,研究了猪粪干发酵过程的产气情况、氨抑制现象和出料流动性,并考察了上推流厌氧反应器进行猪粪干发酵的可行性.试验采用4种不同TS质量分数(20%、25%、30%、35%)的猪粪作为原料,经160 d的运行.结果表明,进料TS质量分数对发酵过程有很大的影响,4种不同进料TS质量分数稳定的池容产气率分别为2.40、1.73、0.89、0.62 L.(L.d)-1,进料TS质量分数为20%、25%和30%的产气效率明显优于进料TS=35%的产气效率.随着进料TS质量分数从20%增加到35%,氨氮质量浓度>2 300 mg.L-1会出现明显的产气抑制.在进料TS=35%时,氨氮质量浓度能达到3 800 mg.L-1,产气速率相对于进料TS=20%递减74.1%.当进料TS达到35%、出料TS质量分数达到17.1%、流速<0.002 m.s-1时,UPAR不能顺利出料.