内循环厌氧反应器多相流流场的三维数值分析

利用数值模拟的方法,引入欧拉双流体多相流模型及标准k-s紊流模型,模拟计算内循环厌氧反应器的三相流三维流场,并通过改变污泥颗粒密度及进水流量,针对固相流速及固含率的变化情况,分析条件的改变对流场的影响。研究结果表明,应用数值模拟方法可以获得内循环厌氧反应器内的流场特征;污泥颗粒密度及进水流量的改变对于反应器内污泥颗粒的流速及分布的均匀性有较为明显的影响。模拟结果对反应器的应用及优化设计具有一定的参考价值。     

EGSB反应器处理产氢发酵液

以厌氧颗粒污泥为接种污泥,对厌氧颗粒污泥膨胀床（EGSB）反应器处理产氢发酵液的启动性能进行了研究。结果表明,在温度为（35±1）℃,水力停留时间（HRT）为6h的条件下,逐渐提高进水COD,经过40d连续运行,EGSB反应器启动成功。容积负荷达到14kgCOD／（m3·d）时,COD去除率约为80％,产气量为26．84L／d,甲烷含量为57．9％。     

A mathematical model for a hybrid anaerobic reactor

A mathematical model for a hybrid anaerobic reactor (HAR), which uses self-immobilized anaerobic bacterial granules under completely fluidized condition, has been developed. Stoichiometry of glucose fermentation into methane has been considered in this model. The model includes: (1) a biofilm model which describes substrate conversion kinetics within a single granule; (2) a bed fluidization model which describes the distribution of biogranules within the fluidized bed and (3) a reactor model which links the above two to predict the substrate and products concentration profile along the reactor height. Product and pH inhibition for each group of bacteria has been considered in the kinetic model. The spatial distribution of each group of anaerobic bacteria within granules has been found to play a vital role in bringing about the conversion. Experiments were conducted in the reactor using a synthetic effluent containing glucose as the carbon source to study the treatment efficiency. The model was simulated first assuming a 3-layered distribution [MacLeod, F.A., Guiot, S.R., Costerton, J.W., 1990. Layered structure of bacterial aggregates produced in an upflow anaerobic sludge bed and filter reactor. Applied and Environmental Microbiology 56, 1598-1607.] of anaerobic bacteria within granules and then homogeneous distribution [Grotenhuis, J.T.C., Smit, M., Plugge, C.M., Yuansheng, X., van Lammeren, A.A.M., Stams, A.J.M., Zehnder, A.J.B., 1991. Bacterial composition and structure of granular sludge adapted to different substrates. Applied and Environmental Microbiology 57, 1942-1949.] of anaerobic bacteria. The predictions of model simulation with the assumption of layered structure closely represented the experimental data.     

Simultaneous biodegradation of nitrogen-containing aromatic compounds in a sequencing batch bioreactor

Many nitrogen-containing aromatic compounds (NACs), such as nitrobenzene (NB), 4-nitrophenol (4-NP), aniline (AN), and 2,4-dinitrophenol (2,4-DNP), are environmentally hazardous, and their removal from contaminated water is one of the main challenges facing wastewater treatment plants. In this study, synthetic wastewater containing NB, 4-NP, 2,4-DNP, and AN at concentrations ranging from 50 to 180 mg/L was fed into a sequencing batch reactor (SBR). Analyses of the SBR system indicated that it simultaneously removed more than 99% of the NACs at loading rates of 0.36 kg NB/(m3·d), 0.3 kg 4-NP/(m3·d), 0.25 kg AN/(m3·d), and 0.1 kg 2,4-DNP/(m3·d). Bacterial groups of Bacteriodetes, Candidate division TM7, α-Proteobacteria, and β-Proteobacteria were dominant in the clone libraries of 16S rRNA genes retrieved from the microbial communities in the SBR system. "Cycle tests" designed to alter feeding and aeration parameters of the SBR system demonstrated that the resident microbial biome of the SBR system responded rapidly to changing conditions. Consumption of O2 was concomitant with the apparent mineralization of NACs. Aromatic ring-cleaving dioxygenase activities suggested that (1) AN and NB were degraded via catechol 2,3-dioxygenase; (2) 4-NP was degraded via 1,2,4-benzentriol 1,2-dioxygenase; and (3) 2,4-DNP was degraded via an unresolved pathway.     

Alga-lysing bioreactor and the dominant bacteria strain

Alga-lysing bacteria have been paid much attention to in recent years. In this study, the alga-lysing strain P05 which was isolated from an immobilizing biosystem was immobilized by coke and elastic filler, forming two biological reactors. The removal efficiencies of algae, NH3-N and organic matter using the two reactors were studied. The results showed that strain P05 was an ideal algal-lysing bacteria strain because it was easy to be immobilized by coke and elastic filler which are of cheap, low biodegradability and the simple immobilization procedure. After 7 d filming, the biological film could be formed and the reactors were used to treat the eutrophic water. These two reactors were of stability and high effect with low cost and easy operation. The optimal hydraulic retention time (HRT) of each reactor was 4 h. The algae removal rates were 80.38% and 82.1% (in term of Chl-a) of coke reactor and filler reactor, respectively. And that of NH3-N were 52.3% and 52.7%. The removal rates of CODMn were 39.03% and 39.64%. The strain P05 was identified as Bacillus sp. by PCR amplification of the 16S rRNA gene, BLAST analysis, and comparison with sequences in the GenBank nucleotide database.     

Particle size distribution and removal in the chemical-biological flocculation process

The particle characterization from the influent and effluent of a chemical-biological flocculation (CBF) process was studied with a laser diffraction device. Water samples from a chemically enhanced primary treatment (CEPT) process and a primary sediment tank process were also analyzed for comparison. The results showed that CBF process was not only effective for both the big size particles and small size particles removal, but also the best particle removal process in the three processes. The results also indicated that CBF process was superior to CEPT process in the heavy metals removal. The high and non-selective removal for heavy metals might be closely related to its strong ability to eliminate small particles. Samples from different locations in CBF reactors showed that small particles were easier to aggregate into big ones and those disrupted flocs could properly flocculate again along CBF reactor because of the biological flocculation.     

Community analysis of ammonia and nitrite oxidizers in start-up of aerobic granular sludge reactor

A lab-scale sequencing batch reactor (SBR) was setup and the aerobic granular sludge was successfully incubated by using anaerobic granular sludge as seed sludge. Nitrogen was partially removed by simultaneous nitrification and denitrification (SND) via nitrite with free ammonia (FA) of about 10 mg/L. The denaturing gradient gel electrophoresis (DGGE) method was used to investigate community structure of α-Proteobacteria, β-Proteobacteria, ammonia oxidizing bacteria (AOB), and Nitrospira populations during start-up. The population sizes of bacteria, AOB and Nitrospira were examined using real-time PCR method. The analysis of community structure and Shannon index showed that stable structure of AOB population was obtained at the day 35, while the communities of α-Proteobacteria, β-Proteobacteria, and Nitrospira became stable after day 45. At stable stage, the average cell densities were 1.1×1012, 2.2×1010 and 1.0×1010 cells/L for bacteria, AOB and Nitrospira, respectively. The relationship between characteristics of nitrifying bacteria community and nitrogenous substrate utilization constant was discussed by calculating Pearson correlation. Certain correlation seemed to exist between population size, biodiversity, and degradation constant. And the influence of population size might be greater than that of biodiversity.     

低温供热堆选址阶段的环境影响评价与分析

根据低温供热堆选址阶段环境影响评价的要求,结合工程具体设计方案,对低温供热堆在正常运行和事故工况下可能造成的环境影响进行分析、预测与评价,以作为审管当局决策的重要依据.低温供热堆在正常运行状态时,放射性气载流出物在大气中迁移和扩散及对公众的辐射剂量估算采用的是IAEA安全系列19号报告中给出的筛选模式(稀释模式);事故...     

反应堆压力容器保温层辐射屏蔽组件传热计算分析及屏蔽材料试验研究

目的 确保华龙一号HPR1000反应堆压力容器保温层辐射屏蔽组件在运行工况下的可靠性、安全性以及能够有效执行其功能。方法 采用基于传热理论结合经验公式的理论计算方法,以及流固耦合的有限元仿真分析,对辐射屏蔽组件的运行温度进行计算。针对屏蔽材料在受热状态下的性质变化,进行一系列的热态性质试验。结果 理论计算方法得到的结果为163.36~168.74 ℃,有限元仿真分析得到的结果为236.85~266.85 ℃,两者偏差约100 ℃。对造成该种差异的原因进行了分析,发现仿真分析方法得到的结果的置信度更高。屏蔽材料在受热状态下,其体积膨胀率可达到38.82%,而当屏蔽材料受热超过其温度限值204 ℃后,将出现明显的粉化等物理状态恶化的趋势。结论 流固耦合的有限元仿真分析方法更适用于辐射屏蔽组件的传热过程计算,同时获取了屏蔽材料物理性状受热变化趋势,对屏蔽组件的选材及结构设计具有指导意义。     

Oxidative destabilization of dissolved organics and E. coli in domestic wastewater through immobilized cell reactor system

Domestic wastewater contains a considerable amount of pathogenic organisms besides non-biodegradable organics. The conventional technologies followed for the treatment of domestic wastewater are less efficient in removing pathogenic organisms despite substantial removal of dissolved organics. The focal theme of the present investigation was to use a chemo-autotrophic activated carbon oxidation (CAACO) system, an immobilized cell reactor using chemoautotrophs (Bacillus sp.) for the treatment of domestic wastewater. The oxidation of organics and Escherichia coli in wastewater is controlled by the parameters space time, O(2)/COD, bed height and cod loading. The scheme comprised of anaerobic treatment, sand filtration and CAACO treatment removed BOD. COD, Total organic carbon (TOC), dissolved protein, total Kjeldhal nitrogen (TKN) and bacterial count (most probable number (MPN)) by 81%, 92%, 84%, 94%, 93% and 99.9997%, respectively. The low concentration of E. coli in the CAACO-treated wastewater was completely eliminated through UV irradiation in 3 min at 254 nm.