微波诱导催化技术在环境治理中的应用研究

微波诱导催化技术以其快速、高效和无二次污染等特点,日益受到环保研究者的重视。目前,微波诱导催化技术已在大气污染控制、水污染控制及固体废弃物处理与处置等环境治理领域取得了显著效果。阐述了微波诱导催化技术的基本原理、催化反应的催化剂和载体及催化反应的机制,归纳了微波诱导催化技术在环境治理中的应用现况及实例,分析了微波诱导催化技术在实际应用中存在的问题,并提出相应的解决措施,最后对微波诱导催化技术在环境治理领域中的进一步应用进行了展望。     

The chemical exploitation of nickel phytoextraction: An environmental, ecologic and economic opportunity for New Caledonia

Herein, we explore the outlines of an innovative method based on the chemical recovery of metal-rich biomass produced in phytoextraction technologies. Taking advantage of the adaptive capacity of some New Caledonian plants to hyperaccumulate Ni²⁺ cations in their aerial parts, this technique is based on the direct use of metals derived from plants as “Lewis acid” catalysts in organic chemistry. Metallic cations contained in New Caledonian nickel hyperaccumulators are recovered through a simple cost-effective process and serve the preparation of heterogeneous catalysts used in synthetic transformations allowing access to molecules with high added-value. The design of all processes is in line with the principles of green chemistry; it is adapted to the new economic constraints; it offers a new relevant outlet for metal-rich biomass; and it represents an alternative to non-renewable mineral materials.     

负载TiO2/Fe3+的玻璃纤维反应器光催化苯酚

以玻璃纤维为载体,将TiO2负载到其表面形成了空间玻璃纤维反应器,引入Fe3+作为掺杂改性离子,形成了负载TiO2/Fe3+的空间玻璃纤维光催化反应器,并以高压汞灯为光源进行了光催化降解水中苯酚的实验研究,考察了影响苯酚光催化降解的因素,确定了在UV365～250 W光源照射下,pH为3～5,O2通入量1.0 L/(min.L),反应器内上升流速为0.7 m/min等实验条件下,初始浓度为30 mg/L的苯酚废水经120 min光催化反应后,降解率可达到85%,矿化率可达80%。     

光助芬顿反应催化降解气体中甲苯

以甲苯作为挥发性有机污染物(VOCs)的代表,利用连续进气动态实验装置,研究光助芬顿反应降解气体中甲苯的作用.考察了芬顿试剂溶液初始p H、H2O2浓度、Fe2+浓度以及甲苯初始浓度对降解甲苯的影响,并利用在线质谱和色谱对产物进行了定性、定量分析.结果表明,紫外光照加快了羟基自由基的生成,显著提高了气体中甲苯的去除率;p H=3.0、H2O2浓度为20 mmol·L-1、Fe2+浓度为0.3 mmol·L-1的条件下,甲苯去除率最高;当甲苯初始浓度为260 mg·m-3时,去除率能够达到98%;光助芬顿反应催化降解气体中甲苯实验未检测到CO2之外的中间产物,CO2产率分析表明去除的甲苯全部转化为CO2.     

阻挡放电联合金属氧化物催化降解H2S的研究

采用介质阻挡放电联合金属氧化物催化降解气态H2S,考察了单组分及复合金属氧化物催化剂、催化剂与低温等离子体结合方式对H2S及副产物O3去除性能的影响,分析了等离子体联合Mn复合金属氧化物催化降解H2S机理。结果表明,金属负载量相同条件下,电压低于22kV时,Mn复合金属氧化物对H2S的催化活性高于单组分Mn金属氧化物,催化活性及对O3的分解能力从大到小依次为:Ag+Mn、Cu+Mn、Fe+Mn、Mn。当电压为18 kV时,Ag+Mn、Cu+Mn、Fe+Mn复合催化剂分别比单组分Mn催化剂对H2S的去除效率提高了近10%、6%、4%。等离子体后催化区域中Mn催化剂催化氧化H2S的效率明显低于等离子体催化区域。Mn催化剂在等离子体后催化区域中能有效催化分解O3。随着电压的升高,Mn金属氧化物在等离子体后催化区域对H2S催化作用逐渐增强。在电压22 kV时,等离子体联合后催化比单独等离子体作用时,H2S去除效率提高了近11%。     

The use of nanovermiculite catalyst in the study of removal of the organic load and degradation of atrazine via ozone process in RPB reactor

Abstract

The main objective of this study is the degradation of a synthetic solution of atrazine by a modified vermiculite catalyzed ozonation, in a rotating packed bed (RPB) reactor. A 0.5?L RPB reactor was used to perform the experiments, using a Central Composite Design (CCD) response surface to construct the quadratic model based on the factors: pH, catalyst concentration and reactor rotation frequency. The response variable was the removal of the organic load measured in terms of Chemical Oxygen Demand (COD). After the complete quadratic model was constructed through the response surface, the COD degradation process had an optimal removal of 41% under the following conditions: pH 8.0, rotation of 1150?rpm and catalyst concentration 0.66?g L^?1.     

相转移催化合成新型含硫氧螯合树脂

1　IntroductionAseveryoneknown ,chelatingresincontainingheteroatomsuchassulfur,nitrogen ,andoxygenpossessexcellentadsorptionandselectivitypropertiesformetalions,especiallyfornoblemetallicions.Therefore ,manyeffortshavebeendonetopreparetheabove mentionedre…     

针铁矿纤铁矿催化降解苯酚动力学速率及其反应产物研究

研究了针铁矿和纤铁矿在过氧化氢参与下对苯酚的催化降解的动力学速率与溶液pH关系,并用紫外吸收谱测定其反应产物的谱学特征,发现纤铁矿反应体系降解苯酚的速率大于针铁矿反应体系,其中又以pH=3.8的纤铁矿体系反应速率常数最大。当溶液pH=3～4时,苯酚可被完全降解,并有40%～60%有机碳(TOC)被矿化。当溶液pH=4～5时,苯酚可被转化为多酚类化合物,但基本上不被矿化。当溶液pH>5时,苯酚没有发生明显的转化和矿化。     

电催化氧化降解大气中甲醛的研究

将有机废气通过高效微孔曝气转移到液相,采用活性碳纤维作为电极,研究不同鼓气速率和不同电压对处理效果的影响.结果表明,本方法适用于低浓度高气量有机废气的处理.在实验范围内,当曝气速率为20L·h-1,外加电压为5V的条件下,处理速率最稳定.     

Preparation and characterization of visible-light-active nitrogen-doped TiO2 photocatalyst

A visible-light photocatalyst was prepared by calcination of the hydrolysis product of Ti(SO4)2 with ammonia as precipitator. The color of this photocatalyst was vivid yellow. It could absorb light under 550 nm wavelength. The crystal structure of anatase was characterized by XRD. The structure analysis result of X-ray fluorescence(XRF) shows that doped-nitrogen was presented in the sample. The photocatalytic activities were evaluated using methyl orange and phenol as model pollutants. The photocatalytic activities of samples were increasing gradually with calcination temperature from 400℃ to 700℃ under UV irradiation. It can be seen that the degradation of methyl orange follows zero-order kinetics. However, the calcination temperatures have no significant influence on the degradation of phenol under sunlight. The N-doped catalyst shows higher activity than the bare one under solar irradiation.