反相流动注射催化动力学分光光度法测定海水中的痕量Cu

在弱碱性的介质中,Cu能够对H2O2氧化对苯二酚的反应起到明显的催化作用,反应产物在500 nm波长处有最大吸收峰.据此,发展了一种反相流动注射催化动力学分光光度法测定海水痕量Cu的新方法.在最佳条件下,Cu2+的浓度在0～40 μg/L具有良好的线性关系,相关系数0.9993,检出限为0.2 μg/L,回收率为98.7%～104.2%,用5 μg/L标准溶液进样的相对标准偏差为1.03%(n=10).     

二氧化锰氧化降解金霉素的动力学研究

研究了金霉素(CTC)在二氧化锰(MnO2)作用下的氧化降解过程,并讨论了初始MnO2浓度、体系pH及温度对降解反应的影响.无MnO2存在时,CTC没有发生降解.但是当体系中存在MnO2时,CTC浓度开始迅速下降,反应后期降解速率逐渐变慢;同时体系中二价锰离子(Mn2+)浓度逐渐升高,表明MnO2可以降解CTC,该过程是一个氧化还原反应.采用草酸溶解MnO2和过滤2种不同的方法终止反应,对比2种方法所得的结果,可以发现该反应过程中,开始阶段降解作用占主导地位,在反应达到平衡后吸附作用才明显.CTC的降解速率随着MnO2初始浓度的增加和体系温度的升高均显著加快.反应体系的pH能强烈影响CTC的氧化降解,降解速率随着pH的升高而明显降低.这是由于CTC随体系pH由3.77升高到7.41时,分别以阳离子、中性形态和阴离子的形式存在;而-δMnO2(pHzpc=2.25)表面在pH3.77的整个范围内均呈现为负电性.因此随pH升高,阴离子形态的CTC逐渐增多,导致其在MnO2表面的吸附作用减弱,从而使降解速率变缓.     

基于ASBR反应器的厌氧氨氧化启动及特性研究

采用ASBR反应器,接种消化污泥和厌氧颗粒污泥的混合污泥,在温度(35±1)℃、HRT为24h、pH为7.3～8.5的条件下经过160d的培养,获得了砖红色的厌氧氨氧化菌菌胶团.试验结果表明:进水NH+4-N和NO-2-N浓度约为180mg·L-1,平均总氮容积负荷为0.38kg·m-3·d-1时.NH4+4-N和NO-2N的去除率平均为93.2%和95.7%,TN平均去除率为86.9%.厌氧氨氧化反应过程出水pH值高于进水,稳定在7.74左右.     

高度有序的TiO2纳米管阵列光催化性能研究

采用恒压阳极氧化法在纯钛箔表面制备TiO2纳米管阵列,利用SEM和XRD对其进行了形貌和晶型的分析和表征,并通过TiO2纳米管阵列膜对甲基橙光催化降解,探讨光照时间、甲基橙溶液的初始浓度、溶液的初始pH值和H2O2加入浓度等因素对甲基橙的脱色率影响.结果表明,H2O2加入浓度为50mg·L-1,紫外光照射2h,溶液为中性时,在30 mg·L-1的甲基橙溶液(50mL)中,甲基橙溶液的脱色率达到100%.当H2O2加入浓度进一步增大到100 mg·L-1时,光催化的效率进一步提高,紫外光照射1h,甲基橙溶液的脱色率就已经达到了100%,并未出现抑制光催化的现象.同时还研究了TiO2纳米管阵列电极的稳定性.实验结果表明,随着TiO2纳米管阵列使用次数的增加,其光催化效果略有所下降.     

臭氧及催化臭氧化降解2,4-滴丙酸动力学研究

对臭氧及催化臭氧氧化降解2,4-滴丙酸(DCPP)的效率进行了研究,并利用竞争动力学法算得了DCPP与臭氧及羟基自由基的反应速率常数,参比有机物为硝基苯(NB).结果表明,DCPP与臭氧的反应速率常数K-DCPP为(0.733±0.163)L·mol-1·s-1,与羟基自由基的kOH-DCPP为2.367×109L·mol-1·s-1.在单独臭氧和Mn(Ⅱ)催化臭氧化降解DCPP过程中,基于上述结果计算所得的速率常数与实际所测的表观反应速率常数具有较好的吻合度.以上结果对臭氧化处理含DCPP废水具有很好的理论指导意义.     

Significance of iron compounds in chemical and electro‐oxidation treatment of sugar industry wastewater: Batch reaction

Industrialization plays a major role in a nation's growth. However, with an increase in industrial activities, pollution levels are also increasing. Among all industries, the sugar‐processing industry is one that requires large amounts of water to process the sugar, and, consequently, it discharges large amounts of water as effluent. Highly polluted wastewater brings changes to the physicochemical characteristics of the surrounding environment. Iron compounds have had a significant impact when they are used in wastewater treatment in various applications, including when they are used to minimize the pollution levels in sugar industry wastewater (SIWW). To minimize the pollutant levels from SIWW, iron compounds have been key for uses in treatments involving chemical and electro‐oxidation. Two different methodologies of electrocoagulation and chemical coagulation have been used to treat SIWW. In electrocoagulation, an iron plate is used as an electrode material under specific operating conditions. Ferrous sulfate and ferric chloride have been used as chemical coagulants at various pH and mass loading levels. The use of iron metals shows an 82% reduction in chemical oxygen demand (COD) and an 84% reduction in color at the optimum condition of pH 6, an electrode distance of 20 millimeters, and a current density of 156 square centimeters. As a chemical coagulant, iron salt (ferrous sulfate) provides a reduction of 77% COD and a 91% reduction of color at pH 6 and a 40‐millimole mass loading. Electrochemical treatment using iron was found to be suitable to treat SIWW. The sludge generated after treatment can be burned or composted with the possible recovery of some of the treatment costs.     

Use of artificial roughness for performance enhancement of solar air heaters—a review

The performance characteristics of a solar air heater can effectively be improved by providing artificial roughness in the form of protrusions and dimples of various shapes, sizes, and orientations on the underside of heated surface. An extensive literature review on artificial roughness elements has been carried and the correlations developed for heat transfer and friction factor for roughened solar air collector have been discussed and presented in this paper. The performance parameter has also been computed and compared with various kinds and shapes of roughness geometries using correlations developed by various investigators. The optimum values of the roughness parameters obtained by several investigators have also been discussed.     

湿式电除尘器在细颗粒物控制中的应用

论述了湿式电除尘器的工作原理、技术特点、结构及设计形式,探讨了湿式电除尘器在我国的应用前景。     

生物质热解焦油脱除方法研究进展

生物质热解焦油的产生不仅降低了热解效率,影响设备运行,更危害着人类健康。通过介绍生物质热解焦油的特性及危害、对比分析目前各种不同除焦方法(文丘里法、旋风分离法、电捕焦法、高温裂解法和催化裂解法)的特点及应用前景,得出采用多种方法组合的形式进行联合除焦可显著提高焦油脱除效率。寻找用于湿法除焦的可再生利用的有机溶剂,开发经济、高效、长寿命的催化剂将成为生物质热解焦油脱除技术开发的重点。     

Bi/Fe_3O_4催化NaBH_4还原水中对硝基苯酚

以磁性Fe_3O_4为载体负载Bi(NO_3)_3,再用NaBH_4还原Bi~(3+)制备了Bi/Fe_3O_4催化剂。采用XRD和紫外-可见光谱对催化剂进行表征。考察了Bi负载量、NaBH_4加入量和Bi/Fe_3O_4加入量对Bi/Fe_3O_4催化NaBH_4还原对硝基苯酚(4-NP)效果的影响。表征结果显示:当催化剂中Bi含量较少时,Bi分散良好;当Bi含量较多时,会形成纳米颗粒。实验结果表明:当反应温度为25℃,初始4-NP浓度为4.0 mmol/L时,在Bi负载量为5%(w)、Bi/Fe_3O_4催化剂加入量为500 mg/L,NaBH_4加入量为6.0 g/L的条件下,反应速率常数为0.581 min~(-1),4-NP的去除率为99.7%;Bi/Fe_3O_4催化剂稳定性好,重复使用15次后,活性基本不变。