Use of two-surfactants mixtures to attain specific HLB values for assisted TPH-diesel biodegradation

In a surfactant assisted biodegradation process, the choice of surfactant(s) is of crucial importance. The question is: does the type of surfactant(i, e. chemical family) affect the biodegradation process at fixed hidrophillic-lypofillic balance(H/B) values? Microcosm assessments were developed using contaminated soil, with around of 5000 mg/kg of hydrocarbons as TPH-diesel. Mixtures of three nonionic surfactants were employed to get a wide range of specific HLB values. Tween20 and Span20 were mixed in the appropriate proportions to get HLB values between 8.6 and 16.7. Tween/Span60 mixtures reached HLB values between 4.7 and 14.9. Finally,Tween/Span80 combinations yielded HLB values between 4.3 and 1.5. TPH-diesel biodegradation was measured at the beginning, and after 8 weeks, as well as the FCU/grsod, as a measure of microorganisms‘ development during the biodegradation period. A second aim of this work was to assess the use of guar gum as a biodegradation enhancer instead of synthetic products. The conclusions of this work are that surfactant chemical family, and not only the HLB value clearly affects the assisted biodegradation rate. Surfactant‘s synergism was clearly observed. Regarding the use of guar gum, no biodegradation enhancement was observed for the three assessed concentrations,i.e., 2, 20, and 200 mg/kg, respectively. On the contrary, TPH-diesel removal was lower as the gum concentration increased. It is quite possible that guar gum was used as a microbial substrate.     

絮凝与生物强化组合技术处理油田含聚污水

针对河南油田采油污水,室内选择4种常用无机絮凝剂与阳离子聚丙烯酰胺(CPAM)复配,筛选出最佳的絮凝剂用量:聚合氯化铝(PAC)用量为300 mg/L,CPAM用量为10 mg/L。研究了投加HPAM降解菌对油田含聚污水中COD的去除效果,优选出2株以聚合物(HPAM)为唯一碳源的降解菌,通过分子生物学16SrDNA鉴定,XL-1和XL-2菌分别为苏云金芽孢杆菌和溶血不动杆菌。实验结果表明,在温度为30℃,pH为7.5,降解72 h的条件下,XL-1菌的B/C增大了0.11,COD去除率提高了11.03%;XL-2菌的B/C增大了0.07,COD去除率提高了6.3%。油田污水经絮凝-生物强化组合工艺处理后,出水COD平均值为77.1 mg/L,总去除率为73.2%,絮凝段和生化段工艺的COD去除率分别为54.1%和19.1%,达到《污水综合排放标准(GB/T 8978-1996)》排放标准。     

阳离子淀粉-丙烯酰胺接枝共聚物絮凝剂的制备及其絮凝性能

研究了阳离子淀粉与丙烯酰胺接枝共聚反应制备阳离子型絮凝剂的工艺,并用硅藻土悬浊液及实际水样对产物的絮凝性能进行了考察。其最佳合成条件：阳离子淀粉与丙烯酰胺的质量比为1：4,引发剂加入量为丙烯酰胺质量的0．1％,反应温度50℃,反应时间3h。絮凝效果实验中,接枝共聚物絮凝剂的最佳加入量为4mg／L。与阳离子淀粉和阳离子聚丙烯酰胺絮凝剂相比,接枝共聚物絮凝剂对渭河水及造纸网下白水的絮凝效果更好。     

Influence of the initial state of carbon nanotubes on their colloidal stability under natural conditions

The colloidal stability of dry and suspended carbon nanotubes (CNTs) in the presence of amphiphilic compounds (i.e. natural organic matter or surfactants) at environmentally realistic concentrations was investigated over several days. The suspensions were analyzed for CNT concentration (UV-vis spectroscopy), particle size (nanoparticle tracking analysis), and CNT length and dispersion quality (TEM). When added in dry form, around 1% of the added CNTs remained suspended. Pre-dispersion in organic solvent or anionic detergent stabilized up to 65% of the added CNTs after 20 days of mild shaking and 5 days of settling. The initial state of the CNTs (dry vs. suspended) and the medium composition hence are critical determinants for the partitioning of CNTs between sediment and the water column. TEM analysis revealed that single suspended CNTs were present in all suspensions and that shaking and settling resulted in a fractionation of the CNTs with shorter CNTs remaining predominantly in suspension.     

粉煤灰处理阴离子表面活性剂废水及机理研究

采用粉煤灰作为吸附混凝剂,研究了粉煤灰对废水中阴离子表面活性剂十二烷基磺酸钠（SDS）的去除及机理。分析了粉煤灰投加量、吸附时间、pH值对废水中SDS去除率的影响,探讨了最佳条件下废水中SDS去除率,研究了粉煤灰动力学特征。结果表明,在200mL浓度50mg/L的SDS溶液中,调节pH值为13,加入70 g粉煤灰,搅拌20m in后,SDS的去除率为83.3%。粉煤灰对SDS的吸附符合Freund lich吸附等温式。     

氯代十六烷基吡啶缔合微粒光度法测定二氧化氯

在pH3.49的NaAC-HCl介质中,ClO2与过量的KI反应生成I3-,I3-在350nm处有一吸收峰;当阳离子表面活性剂(CS)氯代十六烷基吡啶(CPCM)等存在时,形成淡黄色的较稳定的缔合微粒(CPCM-I3)n,在354nm处产生一个吸收峰,在470nm和520nm处产生2个共振散射峰。ClO2浓度C在0.0149～1.524mg/L范围内符合朗伯比耳定律,回归方程为△A=0.1136C+0.0001,相关系数R为0.9988,检测限为0.007mg/L。据此,建立了一种痕量ClO2光度分析新方法,用于样品分析,结果令人满意。     

不同类型表面活性剂对1，2，4-三氯苯的增溶作用

研究了阴离子表面活性剂十二烷基硫酸钠、阳离子表面活性剂十六烷基三甲基溴化铵和非离子表面活性剂脂肪醇聚氧乙烯醚LAE对1,2,4-三氯苯（TCB）的增溶作用。讨论了表面活性剂类型对增溶作用的影响。比较发现,非离子型表面活性剂的增溶能力高于离子型表面活性剂。其原因主要是疏水有机物在非离子表面活性剂胶束中的增溶方式不同造成的。3种表面活性剂对TCB的增溶数据还表明,增港作用不仅在临界胶束浓度（MC）以上发生,而且在表面活性剂浓度低于CMC时亦有明显的增溶作用。     

高密度电荷阳离子聚电解质的制备及应用

采用酯交换反应合成高密度电荷阳离子聚电解质（粘均分子量260万、电荷密度45％）．用于油污泥的混凝处理。试验结果表明．高密度电荷阳离子聚电解质可以使粘土颗粒表面Zeta电位中和到0mV,并使油污泥实现油、水与泥渣三相分层,油品回收率达82％     

复合表面活性剂对燃煤陶瓷窑炉黑烟润湿作用的研究

为了有效控制燃煤陶瓷窑炉黑烟的污染,根据理论和实验研究的结果,选择合适的润湿剂和助剂,研究了阴离子表面活性剂Y1、非离子表面活性剂F1与无机盐Z1复配后溶液表面张力的变化,筛选出了表面张力较小的配比。利用所选配比对燃煤陶瓷窑炉黑烟的润湿作用进行了W alker实验研究和理论分析。实验结果表明,0.5 mmol/L Y1+50mmol/L Z1+0.03 mmol/L F1的配比对黑烟的润湿作用较好。并对其润湿机理进行了探讨。     

表面活性剂在环境中的生物降解

简述表面活性剂对环境的影响,讨论了表面活性剂生物降解性的测试方法、降解过程动力学及其影响因素,并对各类表面活性剂结构与降解能力之间的关系作了评价。