森林植被对降水水化学的影响

综述了森林植被各个层次对降水水化学影响的主要研究成果,并指出了目前该方面研究存在的问题及今后需要努力的方向。大量集中在乔木层的研究表明,与林外雨比较,穿透雨、树干茎流中多数元素的浓度均呈增加的趋势,浓度大小的总趋势为树干茎流>穿透雨>林外降雨,K、Mg、Mn等表现突出,浓度可增加10倍以上;影响元素浓度变化因素包括降水特征、林分类型、大气状况等;具体到某一种元素,不同区域、不同林型间研究结果差异很大,很难得出一致的结论。对灌草层和枯落物层吸附淋溶作用研究较少,也就不能正确评价森林植被对降水水化学的综合效应。因此,在空间尺度上,要加强不同区域森林植被各个层次的研究;在时间尺度上,短时间的观测缺乏代表性,长期定位观测更具科学性。此外,目前的研究,尤其是国内的研究,只是对现象的揭示,缺乏过程及机理的深入研究,限制了我们对森林植被的内在运行机制和客观规律的正确认识。     

基于卫星遥感的广东地区对流层二氧化碳时空变化特征

利用瓦里关全球本底站和番禺气象局地面观测的CO2浓度资料对SCIAMACHY反演得到的对流层CO2产品进行验证.结果显示:SCIAMACHY产品能较好地反映对流层CO2的分布状况,在珠三角地区反演和观测的残差为1.29×10-6,相关系数为0.69,可用于分析区域对流层CO2的时空分布特征.利用2003~2009年SCIAMACHY观测资料分析研究显示:广东地区对流层CO2柱浓度最高值出现在春季,最低值出现在夏季,浓度年均值和年增长率分别为384.84′10-6和1.53′10-6/a,大于全球和我国同期的观测结果;粤东、粤西、粤北和珠三角地区的浓度均在春、冬季显著高于夏季、秋季 ,相同季节内各区域之间的差异不显著;粤西地区CO2柱浓度的年增长率最高,为1.82′10-6/a,珠三角和粤东地区的年增长率相当,分别为1.65,1.64′10-6/a,粤北地区的年增长率最低,为1.61′10-6/a.     

典型电子废物中多溴联苯醚的模拟浸出释放特征

选取废旧打印机外壳为典型电子废物,以商用腐殖酸溶液为浸提剂,采用浸出试验,模拟研究了废旧打印机外壳中PBDEs(多溴联苯醚)在简易填埋或与生活垃圾共处置场景下,在不同废物粒径、浸提剂DOC浓度、pH、浸提时间和液固比下的浸出特征. 分别用索氏提取法和液液萃取法提取废旧打印机外壳及其浸出液中的PBDEs,采用气相色谱-质谱法(GC-MS)对11种PBDEs同系物的浓度进行定性、定量检测. 结果表明,废旧打印机外壳中BDE28、BDE47、BDE66、BDE85、BDE99、BDE100、BDE153、BDE154被检出,而在浸出液中仅有BDE28、BDE47、BDE66、BDE85、BDE99、BDE153被检出,∑₆PBDEs的浸出率仅为0.04%~0.44%;垃圾渗滤液和土壤溶液中DOM可以促进废旧打印机外壳中PBDEs的浸出,随着浸提剂ρ(DOC)的增大,PBDEs的浸出量增加;在酸性条件下PBDEs的浸出量低于在中性条件下的浸出量;随着浸出时间的延长,PBDEs的浸出量不断增加,但在试验设定的480h内,没有得到一个液固体系的平衡时间,可见废旧打印机外壳中PBDEs的浸出是一个缓慢释放的过程.      

Al13形态的凝胶层析分离及分离级分特性对比

采用聚丙烯酰胺凝胶柱层析法分离纯化聚合氯化铝(PAC)中的Al₁₃形态,并采用Al- Ferron逐时络合比色法、透射电镜(TEM)和ZATESIZER测定仪对分离纯化过程中所得3个级分进行了分析表征和电荷特性的研究;采用烧杯实验法对3个级分处理实际和模拟水样的混凝效果进行了对比性研究.Al- Ferron逐时络合比色法和TEM结果表明,在层析法分离中级分随着洗脱时间延长按分子的大小依次洗脱下来,因此截取中间组分即可得到含量95 %左右的纳米Al₁₃形态;电荷特性和混凝效果研究结果表明,第3个级分其他两者具有更好的除浊、除腐殖酸和脱色效果,并且具有更强的电中和能力,因此Al₁₃形态是一种具有较高正电荷和较高的水解稳定性以及宽的pH适用范围,在给水和废水处理中是一种较为有效的Al形态.     

贵州高原红枫湖水库季节性分层的水环境质量响应

为了揭示贵州高原深水水库水体的垂直分层结构及其水环境质量响应特征,于2008年8月~2009年10月对红枫湖水库5个采样点进行了45次采样,对水文、营养盐等湖沼学变量季节动态和分布进行了分析,探讨了季节性水质恶化事件的发生机制.结果表明,红枫湖水库水体呈单循环混合模式,在4~9月形成分层,但没有典型分层湖泊的温跃层变化,这种不显著的分层导致了水化学的分层.叶绿素a、总磷、总氮和氨氮平均值分别为13.6mg/m3,0.063mg/L,1.22mg/L,0.347mg/L;透明度为1.9m.指示该水库处于中-富营养状态.分层期底层溶解氧在0.3~6.9mg/L之间、平均为2.6mg/L,氮磷质量比在8~104之间,表明红枫湖水库是一个底层滞留带季节性缺氧的高氮、磷限制型水库.贵州高原深水水库季节性水质恶化事件与水体分层结构失稳有关,是富营养化水库在气温骤降时发生“翻湖”所导致的结果,也是贵州高原深水水库富营养化的另一种表现形式.     

Leaching characteristics of bisphenol A from epoxy-resin pavement materials

We investigated the leaching characteristics of bisphenol A (BPA) from two kinds of epoxy-resin pavement materials, one containing epoxy resins (EPs) and the other containing epoxy-acrylate resins (EPAs). Both samples contained residual BPA monomer, at levels of 9.0?µg?g^?1 for the EP resin sample and 4.4?µg?g^?1 for the EPA resin sample. These amounts were larger than amounts previously measured for polycarbonate samples. The amount of BPA leached from the samples increased with temperature. The leaching of BPA from EP was more strongly affected by temperature than the leaching from EPA. The pH also affected the amount of leached BPA. The maximum leached amount was observed under alkaline conditions (pH 10.8) for both sample types. The amounts of BPA that might leach from pavement materials during 1?h of heavy rain were estimated to be 0.9?µg?m^?2 for EP and 3.5?µg?m^?2 for EPA. Our results indicate that EPs disposed of in waste landfills without any treatment may be a source of BPA in leachate at landfill sites.     

Presence of metals in drinking water distribution networks due to pipe material leaching: a review

Drinking water quality should remain constant from the drinking water treatment plant to the consumer's tap. However, water quality characteristics might be affected by interactions with pipe materials. This review describes the iron, copper, lead, zinc, aluminum, chromium, and cadmium in drinking water leached from the pipe material present in drinking water, as well as the factors and mechanisms that affect leaching processes. Data analysis suggests that monitoring the water quality in distribution systems is important for their proper management; however, the low measured concentrations highlight the need for sensitive sensors. In addition, further research is necessary to anticipate possible future effects before the installation of new materials/infrastructure or changes in water source/treatment.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Measurement of the leaching behaviour of granular solid wastes

Leaching of granular solids can be described in terms of specific mass transfer functions of a simple mathematical form.

The parameters can be determined by column leaching experiments under well known flow conditions.

Initially available concentrations are obtained from batch experiments at high dilution. Total concentrations in the solids are determined independently to calculate the available fractions.

The determination of the flow pattern is done by radiotracer measurements. Leachates are analyzed by various analytical methods including AAS and INAA. Total concentrations in the solids are determined by INAA preferably.     

Diazinon leaching through a sandy soil amended with different humic materials

The water leaching of diazinon (O,O‐diethyl‐O‐2‐isopropyl‐6‐methylpyrirnidin‐4‐yl phosphoroth‐ioate) through soil columns, was studied after column amendments with two well characterized humic acids (HA), in both liquid and solid state, and with the original raw organic materials, an oxidized coal and a leonardite, from which the HA were extracted. The percolation curves and the pesticide distribution over the soil columns showed that the addition of the raw organic materials and the solid HAs reduced significantly the mobility of the pesticide along the soil column. The oxidized coal was more effective than the leonardite original material; the different origin of the two carbon‐rich materials had an influence on the diazinon movement along the soil columns and such difference was enhanced with increasing addition rates. Moreover, incubation at field capacity for two months of the soil columns treated with raw oxidized coal and leonardite, largely enhanced the described effects on pesticide behaviour. A complete adsorption of diazinon on columns and a practical absence of leaching was observed when the HA from both materials were added in dissolved form. These results were explained with the swelling of the humic micelles in water and the enhanced availability of inner hydrophobic surfaces for the strong adsorption of diazinon. The water diffusion into the solid humic materials after two months incubation, also explains their high pesticide retention capacity. This work indicates the usefulness of either solid o dissolved humic substances, with the proper hydrophobic character, in preventing the vertical leaching of non‐polar organic pesticides in soils.