Leaching-induced migration and compositional form change of Cu,Zn, and Cd from sludge to loess

Land utilization of sewage sludge has become one of the major issues in environmental mitigation in China. This is particularly important in the Loess Plateau of Northwest China. Sludge enriched with organic matter and nutrients might effectively help to resolve the problems of silty loess soils as evidenced by porosity defect, structural alterations and absence of fertility. After sludge flows into the loess, irrigation water contains heavy metals that leach and migrate into sludge and consequently related human health risks may occur that raise concerns; and this situation needs to be rectified. The characteristics of the vertical migration and composition form change of Cu, Zn, and Cd from composted sludge to loess, and corresponding influencing factors, were investigated by performing a soil column simulation test under the leaching treatment of a one-year irrigation water capacity. Results demonstrated that: (1) composted sludge significantly improved loess fertility, and irrigation leaching transported only a small quantity of organic matter in sludge in the plough layer; (2) although some of the Cu, Zn, and Cd in composted sludge migrated to and concentrated in the middle and upper layers of the soil column during leaching, these metals were mostly retained in the plough layer; and (3) after the leaching treatment of the one-year irrigation water capacity, the compositions of Cu, Zn, and Cd (particularly Cu and Zn) in both plough layer and loess began to stabilize with low concentrations in the exudate. These findings confirmed the applicability of composted sludge in loess regions. This study provided a new insight into the sludge reuse in alkaline soils in arid and semi-arid region.     

Respective contributions of point and non-point sources of E. coli and enterococci in a large urbanized watershed (the Seine river, France)

Because the large rivers of the Seine watershed have a low microbiological water quality, the main sources of fecal contamination were investigated in the present study. The inputs of the point (wastewater treatment plants (WWTPs) effluents) and non-point sources (surface runoff and soil leaching) of fecal bacteria were quantified for Escherichia coli and intestinal enteroccoci used as bacterial indicators. In order to assess the contamination through non-point sources, fecal indicators abundance was estimated in samples collected in small streams located in rural areas upstream from all point sources; these small rivers were characterized by the land use of their watershed. Bacterial indicator numbers were also measured in effluents of WWTPs, some using classical treatment (settling followed by activated sludge process) and some using an additional disinfection stage (UV irradiation). These data were used to estimate the respective importance of each type of source at the scale of the whole Seine river watershed taking into account the land use and the population density. It shows the predominant importance of the point sources of fecal indicator bacteria at the scale of the whole watershed. In a scenario in which activated sludge treatment would be complemented with UV in all WWTPs located in this watershed, the non-point sources of fecal indicator bacteria would be dominant.     

蒙脱土原位生长MoS2复合材料光催化降解罗丹明B的机理研究

通过在Na⁺-MMT表面生长MoS₂来提高窄带隙半导体光生电子分离速率及稳定性.利用阳离子填充法及水热法成功制备了复合光催化剂Na⁺-MMT/MoS₂,并通过FT-IR、SEM、TEM、Raman、XRD、TG、XPS、UV-DRS和ESR等表征进一步证明了材料的成功负载及光、电化学性能. 同时,以有机染料罗丹明B为待降解染料来评价光催化剂的催化性能,发现其在80 min可有效降解罗丹明B,降解率达96%.经过5次循环使用后,Na⁺-MMT/MoS₂复合光催化剂仍具有较好的光催化性能.因此,利用MMT的表面电负性及稳定的片层结构负载MoS₂,可形成光生电子迁移通道进一步提高电荷迁移速率及光催化剂的稳定性.本研究可为黏土材料调控窄带隙半导体制备环境友好型光催化剂提供新思路.     

SnAgCu焊料中Sn元素在模拟土壤溶液中的浸出行为

研究了Sn-3.5Ag-0.75Cu无铅焊料及其与Cu基板的钎焊接头在模拟土壤的NaCl,NaCl-Na2SO4和NaCl-Na2SO4-Na2CO3溶液中Sn元素的浸出行为.结果表明:焊料在NaCl-Na2SO4-Na2CO3溶液中Sn的浸出相对严重;而接头在NaCl溶液中Sn的浸出量最多.在Sn浸出量多的焊料和接头表面形成厚而疏松的腐蚀产物,XRD分析表明其产物主要由SnO,SnO2和Sn4(OH)6Cl2组成.动电位极化测试分析表明接头中Cu基板与焊料合金之间的电偶腐蚀是焊料合金与接头在同种溶液中Sn元素浸出差异的主要原因.     

废弃电路板中多溴联苯醚的溶出规律研究

采集浙江台州电子垃圾拆解区的废弃印刷电路板,研究其粉体在不同溶剂(甲苯、乙醇、三氯乙烯水溶液和处理前后的垃圾渗滤液)中多溴联苯醚(PBDEs)的溶出规律.同时,采用气相色谱-负化学离子源-质谱联用仪(GC-NCI-MS)检测了上述溶出剂中8种PBDEs同系物的浓度.实验结果表明,电路板粉体(粒径180～380μm)在甲苯、乙醇和三氯乙烯(TCE)水溶液中达到溶出平衡时(甲苯48h,乙醇96h,TCE水溶液240h),PBDEs同系物溶出的总量(∑8PBDEs)分别为2320.06、1946.17和79.38mg·kg-1,处理前后垃圾渗滤液中PBDEs在20d达到溶出平衡,溶出总量分别为1042.12μg·kg-1和23.63μg·kg-1,均以BDE99和BDE47为主;电路板中PBDEs的溶出受粉体粒径影响较大,粒径越小,PBDEs越容易溶出.     

重金属铜在砂质壤土土柱中运移的数值模拟

通过室内土柱出流实验,分析了重金属离子铜在饱和砂质壤土中的运移行为,发现高浓度的入流液有利于铜离子的运移。同时借助于软件包CXTFIT,用确定性平衡模型和非平衡两区模型对铜离子的出流动态进行了拟合,并预测了土柱不同深度处铜离子浓度随时间的变化过程。结果表明,室内饱和均质条件下,应用确定性平衡模型拟合参数模拟精度要高于非平衡两区模型,可以不用考虑不动水体对铜离子运移的影响。     

以印刷电路板废粉末料制取碱式碳酸铜的研究

印刷电路板废粉末料的资源化和无害化问题日益得到重视。以报废印刷电路板经机械粉碎和分选后的非金属粉(铜含量1%～5%)为原料,采用"氨浸—脱氨—干燥"的工艺制备碱式碳酸铜,设计了实验装置,考察了氨浸分离工艺条件,通过实验验证了其可靠性:铜的回收率达到98.8%以上,获得了纯度不小于98.0%的碱式碳酸铜,采用X射线粉末衍射(XRD)﹑扫描电镜(SEM)和能谱(EDS)方法对产品进行了分析和表征。     

垃圾焚烧灰性质分析及控制方法

随着焚烧技术在垃圾处理方式中普遍采用,焚烧产生的灰渣数量也日益增加。灰渣与飞灰中有毒的重金属及有机物质会污染土壤与地下水,对人类健康造成极大的影响。本文对各类垃圾焚烧灰渣的物理化学性质及重金属浸出特性进行了详细的阐述,介绍了灰渣的毒性分析与控制方法。通过分析可知:为了避免灰渣二次污染应该重点控制铬、镉、铍、铅等重金属和二恶英、呋喃等有机物的污染;处置后的灰渣有害离子浸出能力降低,根据灰渣物理和工程性质,可以成为再生资源充当填充材料和混凝土与沥青路面骨料等。     

零价铁和碱激发矿渣稳定/固定化处理铬渣研究

采用零价铁和碱激发矿渣对铬渣进行稳定/固定化处理,考察了处理后固化体的毒性浸出水平,矿物组成及Cr形态分布变化情况,并对铬渣的处置和利用的有效性进行评价.结果表明,还原固定化处理后的样品硫酸硝酸法浸出毒性可满足作为砖或砌块使用的标准,抗压强度均高于15 MPa,其中Cr主要以Fe/Mn氧化物结合态存在,可被用于采石场修复、封闭泻湖以及作为路基材料等一些特殊用途.     

LED3A土柱淋洗Pb与Zn污染砂土的效果

为探究不同淋洗方式下螯合型表面活性剂LED3A（N-十二酰基乙二胺三乙酸钠盐）对重金属污染土壤的淋洗效果,采用室内土柱淋洗法研究了LED3A在不同流速条件下对Pb、Zn单一污染砂土的淋洗效果,并通过优化的BCR法分析了淋洗前、后土柱中不同深度处Pb、Zn的形态变化特征.结果表明:LED3A对Pb、Zn单一污染砂土的淋洗规律基本类似,淋出液中ρ（Pb）、ρ（Zn）随淋洗液累积孔隙体积数目的增加呈现急剧增大、达到峰值后逐渐降低的趋势;Pb、Zn的淋洗曲线中均存在不同程度的拖尾现象,且对称性较差;淋出液中ρ（Pb）、ρ（Zn）峰值和Pb、Zn最大累积去除率均随流速的增大而减小.随着淋洗深度和流速的增加,各形态Pb、Zn的去除率均呈现减小的趋势,LED3A对酸可提取态Pb、Zn的去除效果最为显著,去除率均大于50%;对氧化物结合态、有机结合态和残渣态Pb、Zn的去除率大小顺序与淋洗深度和流速有关;对比淋洗前、后土柱中重金属的形态分布可知,最易释放和被生物利用的酸可提取态的占比明显减少,不易或不能被生物利用的氧化物结合态、有机结合态和残渣态的占比明显增加.研究显示,LED3A低流速淋洗不仅能够去除一定量的土壤重金属,同时可有效降低残留重金属对环境的潜在风险.