常减压装置自燃危险分析及对策

通过对常减压装置内介质温度和自燃点的比较分析,绘制装置自燃危险分析图,确定自燃危险的重点防护区,并提出对策措施。     

高密度沉淀池技术概述

高密度沉淀池(Densadeg)以其结构紧凑、处理效率高、出水水质稳定等特点,越来越多地被应用于城市污水一级强化处理和深度处理。本文主要介绍了高密度沉淀池的三种基本类型,重点阐述了RL型高密度沉淀池的工作原理及组成,以及污泥外部循环系统、高效斜板设置的特点;同时介绍了Densadeg的另一种运行方式:超高速沉淀池(ACTIFLO工艺),展望了高密度沉淀池的应用前景。     

基于双向门控循环单元的地表水氨氮预测

为提高水环境中NH4+-N的预测精度,提出了一种互补完全集合经验模式分解(CCEEMDAN)和双向门控循环单元(BiGRU)神经网络的混合预测模型(CCB).首先,通过CCEEMDAN将NH4+-N数据分解成一系列较为简单的模态成份;然后利用BiGRU神经网络对各成份进行预测,将所有分解成份的预测结果相加即可获得最终预...     

大型电信枢纽站空调室外机的噪声控制

大型电信枢纽站使用了大量的空调室外机 ,对城市环境造成了严重噪声污染。针对空调室外机的 3种不同布置方式 ,采取了不同噪声治理措施。结合噪声控制 ,合理组织气流 ,不仅有效地降低了噪声 ,而且改善了空调室外机工作环境。利用吸声吊顶 ,设计消声进风口 ,收到了事半功倍的成效     

企业节能量计算方法浅析

阐述了企业在实施节能降耗过程中普遍采用的节能量计算方法,对产品单耗节能量和技术措施节能量进行了分析,并对比了采用单耗法和技术措施法计算节能量的适用范围和局限性,指出两种方法对企业的意义,提出了在节能量计算过程中的注意事项和几点认识。     

Succession of aquatic microbial communities as a result of the water quality variations in continuous water

The changes of structural and functional parameters of aquatic microbial communities in continuous water on campus of Tsinghua University, China are investigated by polyurethane foam unit(PFU) method. The measured compositions of the communities include alga, protozoa, and some metazoa (such as rotifers). The measured indicators of water quality include water temperature, pH value, dissolved oxygen (DO), potassium permanganate index(CODMn), total nitrogen(TN), total phosphorus(TP) and chlorophyll- a(Chla). The trophic level, expressed by the trophic level indices(TL/c), is assessed with analytic hierarchy process and principal component analysis (AHP-PCA) method. The changing trends of the structural and functional parameters of aquatic microbial communities, such as Margalef index of diversity(D), Shannon-weaver index of diversity (H), Heterotropy index (HI), number of species when the colonization gets equilibrium(Seq), colonizing speed constant(G) and time spent when 90 percent of Seq colonized in PFU ( T90% ), are also analyzed. The experimental results showed the succession of aquatic microbial communities along the water flow is consistent with the water quality changes, so the parameters of microbial community can reflect the changes of water quality from the ecological view.     

电子制冷预浓缩仪-气相色谱-质谱法测空气中含硫化合物

建立电子制冷预浓缩仪-气相色谱-质谱法测定空气中10种含硫化合物的方法。经考察不同采样容器、优化预处理条件、研究样品保存等获得了最佳实验条件,并通过实际样品的测定,考察了方法的适用性。结果表明:硫化氢、甲硫醇和乙硫醇3种高活性含硫化合物校准曲线线性回归系数在0.990以上,另外7种含硫化合物在0.995以上;高、中、低空白加标样品相对标准偏差均为9.5%以内,乙硫醇由于具有高活性和吸附性,低浓度空白加标回收率为63%,其余组分回收率范围为83%~110%;当进样体积为400 mL时,各目标化合物的方法检出限为0.2×10^-3~1.1×10^-3 mg/m³。分析污水处理厂无组织排放监控点的空气结果显示,该方法具有较低的检出限及较强的抗干扰能力,能较好地满足目前监测工作的要求。     

Identification and characterization of extracted microplastics from agricultural soil near industrial area: FTIR and X-ray diffraction method

Microplastics have been found in large quantities in agricultural soil and now become a major global issue. Different types of microplastic have adverse effects on agricultural soil. The most widely used method for the extraction of microplastics in agricultural soil is the density floatation method by using saturated NaCl solution. This method includes the pre-digestion of soil samples with H₂O₂ to remove all the organic matter present in the soil. Different types of microplastic particles were extracted and identified by using ATR-FTIR viz polypropylene, polybutylene tetrapthalate, polyethylene, polystyrene, and polyethylene tetrapthalate. The crystalline nature of extracted microplastic was checked by employing XRD analytical technique. Floatation with higher density saturated sodium chloride (NaCl) solution recovered approximately 80% MPs from soil. Floatation methods were found to be effective for extracting microplastics from soils.     

旋流气浮除油装置预处理含油污水

在河南油田开展旋流气浮除油装置的现场试验,考察进水流量和曝气量对旋流气浮除油装置除油效果的影响。试验结果表明:在进水流量为1.8 m³/h、曝气量为0.5 L/min时,除油率最高达到96.03%;在不添加任何药剂的条件下,装置处理效果稳定;连续运行6 d内,进水含油量为174.57~1 193.15 mg/L时,出水含油量可以保持在137.38 mg/L以下,除油率为58.58%~94.53%。     

基于包扎法的石化乙烯装置挥发性有机物排放特征

装置泄露是石油炼化生产过程中重要的挥发性有机物(VOCs)无组织排放源.基于动态吹扫包扎法采样和预浓缩­­-GC/MS分析方法,对我国南方某石化企业乙烯生产过程中裂解装置的压缩、分离系统及芳烃抽提装置的泄漏组件进行了VOCs排放特征研究.结果表明:烷烃(49.7%~82.4%)含量最高,其次是烯烃(3.2%~35.7%)和芳香烃(5.5%~14.4%); 2-甲基戊烷、甲基环己烷、3-甲基己烷及2,3-二甲基丁烷在整个乙烯生产中都有重要比重.乙烯和反-2-丁烯是裂解装置的重要标志,而苯和甲苯是芳烃抽提装置的重要标志;臭氧生成潜势主要来自于烯烃,尤其是乙烯的贡献率最大,占总烯烃贡献的47.0%~73.0%.参考美国环保局推荐的Method-21,计算了轻液介质阀门的排放速率,获得其泄露排放速率与泄露浓度之间的定量关系为y=3×10^-7x^0.993(R²=0.788).