Probe into effect of the initiator on the thermal runaway hazards of methyl methacrylate bulk polymerization

The bulk polymerization of methyl methacrylate (MMA) is of great importance in chemical industry, but the polymerization process is highly hazardous, and few reports have focused on the effect of initiators on its thermal hazards. In this work, to thoroughly explore the thermal hazard characteristics, the runaway behavior of MMA bulk polymerization is investigated by a combination of thermodynamics experimental and kinetics theoretical methods. The results indicate that the presence of initiator exhibits an undesirable thermal hazard to the MMA bulk polymerization, and its exothermic behavior is also greatly influenced by the type and concentration of initiator. For azobisisoheptanenitrile (ABVN), azodiisobutyronitrile (AIBN) and dibenzoyl peroxide (BPO) initiators as examples, the AIBN-initiated reaction has the shortest adiabatic induction period (39.51 min), whereas the BPO-initiated polymerization exhibits the strongest maximum temperature-rising rate and maximum pressure-rising rate. Under adiabatic runaway, the temperature and pressure change significantly with increasing AIBN concentration, revealing a great potential risk of thermal runaway. Kinetic parameters are calculated to further understand the thermal runaway mechanisms, showing a strong agreement with the adiabatic experimental data. Finally, based on the cooling failure scenario, severity grading is determined by the evaluation criteria. The current work provides extensive data as a reference and guidance for the process design and optimization of MMA bulk polymerization from the perspective of safety.     

超大城市新粒子生成事件对云凝结核贡献分析

高浓度气溶胶在受人类活动影响的污染地区种类和组成非常复杂,因此,其环境和气候效应引起了广泛关注,但在超大城市背景下气溶胶粒子活化成为云凝结核的过程与边界层的相互作用尚不完全清楚.本研究基于北京（BJ）、上海（SH）、广州（GZ）的观测数据,选取3个城市的春季和冬季（北京冬季11月和广州冬季12月的连续观测,以及上海春季4月的加强观测）集成观测气溶胶数据和云凝结核同期观测的变化并结合其他污染物演化规律,对比分析了新粒子生成事件和环境变量演化对3个超大城市云凝结浓度形成的影响.结果表明,以用云凝结核（CCN）浓度与气溶胶（CN）数浓度的比值作为3个城市的活化率,北京CCN数浓度约为（500±200） #·cm^-3,CN最大浓度小于（1.0×10⁴±0.3×10⁴） #·cm^-3,活化率约为0.07%.上海CCN数浓度为（1500±500） #·cm^-3,CN最大浓度小于（98.0×10⁴±0.3×10⁴） #·cm^-3,最大活化率为0.05%.广州CCN数浓度为（150±30） #·cm^-3,CN最大浓度为（24.0×10³±0.3×10³） #·cm^-3,最大活化率为0.03%.本文旨在阐明气溶胶物理化学性质（粒子谱、化学成分、排放源等的时空演变特征）在不同排放源和大气边界层条件的影响下,造成不同类型的排放和输送过程对气溶胶活化率的影响,对比发现新粒子生成（NPF）期间CCN数浓度明显高于非新粒子生成（Non-NPF）时期,证明NPF发生时对CCN的活化率（AR）有显著的提升,在过饱和度SS=0.1%下,北京达到峰值在4×10^-3附近,广州的最大值约为17×10^-4,上海的最大值为3×10^-3.且在NPF期间气溶胶活化率显著增加,3个超大城市在NPF和Non-NPF期间,CCN数浓度与活化率的关系在上海尤其明显,化学成分包括有机物、硝酸盐和硫酸盐等物质也会影响超大城市地区气溶胶粒子的活化率,对比发现3个城市在NPF期间CCN数浓度和活化率都明显区别于其他时段.发现气溶胶的物理和化学性质以及与活化率的直接关系,可用以评估新粒子生成对区域大气环境（如霾）的影响,并估计气溶胶贡献为CCN的间接气候影响.     

压缩型国家人口问题的经济学根源探究

由予工业化发生的时间、背豢、速度的差异。发展中国家的经济、环境、人口问题呈现出与发达国家不同的特点．从人口学角度分析，具有以下几个特征：人口红利型经济期缩短、人口红利泡沫、人口红利期与实际抚养系数大的矛盾交织等。发展中国家具有的压缩性特征使人口与资源、环境的关系出现了新特征．其中分析人口与经济的关系对建设和谐社会、实现经济社会可持续发展起着十分重要的作用。研究认为引起发展中国家人口问题的经济学根源是：①现代化的产业结构的要求与劳动力现代科学素质普遍低下不相适应；②生产性消费的盲目跟进；③对西方理论的“非本土化”借用。创造“一百英镑技术”型经济模式是解决发展中国家人口问题．保持经济社会稳定持续发展的有效方法。     

Evolution in physiochemical and cloud condensation nuclei activation properties of crop residue burning particles during photochemical aging

As a main form of biomass burning in agricultural countries, crop residue burning is a significant source of atmospheric fine particles. In this study, the aging of particles emitted from the burning of four major crop residues in China was investigated in a smog chamber.The particle size distribution, chemical composition and cloud condensation nuclei(CCN)activity were simultaneously measured. The properties of crop residue burning particles varied substantially among different fuel types. During aging, the particle size and mass concentration increased substantially, suggesting condensational growth by formation of secondary aerosols. The particle composition was dominated by organics. Aging resulted in considerable enhancement of organics and inorganics, with enhancement ratios of 1.24–1.44 and 1.33–1.76 respectively, as well as a continuous increase in the oxidation level of organics. Elevated CCN activity was observed during aging, with the hygroscopicity parameter κ varying from 0.16 to 0.34 for fresh particles and 0.19 to 0.40 for aged particles.Based on the volume mixing rule, the hygroscopicity parameter of organic components(κorg) was derived. κorgexhibited an increasing tendency with aging, which was generally consistent with the tendency of the O:C ratio, indicating that the oxidation level was related to the hygroscopicity and CCN activity of organic aerosols from crop residue burning. Our results indicated that photochemical aging could significantly impact the CCN activation of crop burning aerosols, not only by the production of secondary aerosols, but also by enhancing the hygroscopicity of organic components, thereby contributing to the aerosol indirect climate forcing.     

GB/T 20626.3-2006标准要求和发展解析

由于我国特有的高原环境气候,电工电子产品和设备受雷电、污秽与凝露的影响,性能有较大的变化,本标准的要求目的在于增强电工电子产品和设备在高原雷电、污秽与凝露条件下的适应性能,提高电工电子产品和设备在高原特殊环境条件下的可靠性水平,规范生产、配套和使用行为准则。     

Fast and Living Ring-Opening Polymerization of l-Lactide Initiated with In-situ–Generated Calcium Alkoxides

The ring-opening polymerization of l-lactide with calcium alkoxides generated in-situ from bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] and 2-propanol are presented. The polymerization in THF at room temperature proceeds rapidly and in a living manner, giving poly(l-lactide)s of controlled molecular weight, low polydispersity, and tailored end-functionalities. Kinetic studies show the absence of an induction period and a pseudo-first order rate constant of 6.41 L mol^–1 min^–1, which is significantly higher than for related Y₅(-O)(O ⁱ Pr)_13– or aluminum alkoxide-initiated polymerizations. The initiation involves a two-step process: (1) alcoholysis of bis(tetrahydrofuran)calcium bis[bis(trimethylsilyl)amide] to give the corresponding calcium alkoxide and (2) ring-opening of l-lactide via acyl-oxygen cleavage and insertion into the calcium-alkoxide bond. In the presence of excess alcohol, fast and reversible exchange between free alcohol molecules and coordinated alkoxide ligands takes place. This allows tuning of the poly(l-lactide) molecular weight over a wide range.     

挥发性有机物(VOCS)活性炭吸附回收技术综述

随着我国经济建设的发展，各类有机溶剂的应用越来越广，有机废气的排放量也随之逐年增加，其所带来的空气污染等环境问题已经引起全世界的关注。过去，研究人员主要致力于开发高效的VOCs控制技术。随着我国建立可持续社会目标的提出，越来越多的人开始关注经济有效的VOCs回收方法。本文重点介绍了活性炭吸附回收VOCs的工艺现状和研究进展，并预测了VOCs分离回收技术的发展趋势。     

Species analysis methods for hydrolysis polymerization of aluminum

ＳｐｅｃｉｅｓａｎａｌｙｓｉｓｍｅｔｈｏｄｓｆｏｒｈｙｄｒｏｌｙｓｉｓｐｏｌｙｍｅｒｉｚａｔｉｏｎｏｆａｌｕｍｉｎｕｍＦｅｎｇＬｉ，ＬｕａｎＺｈａｏｋｕｎ，ＴａｎｇＨｏｎｇｘｉａｏＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏＥｎｖｉｒｏｎｍｅｎｔａ...     

APM对小麦根尖分生组织细胞异常有丝分裂的诱导

探讨了不同浓度（c／μmol．L－1）和不同处理时间（t／h）下APM对小麦根尖分生组织细胞有丝分裂的影响．实验结果表明，在c（APM）＝1～4μmol／L、处理t＜5h可明显提高有丝分裂指数，对前期和中期细胞分裂的促进作用更为明显；但c（APM）的增加与有丝分裂指数的提高无明显线型关系；APM可促使间期细胞微核形成、中期细胞染色体聚合现象和扰乱纺锤丝的功能．纺锤丝功能上的扰乱可引起细胞的“不均等分裂”和“多极化分裂”形成上述两种细胞异常有丝分裂的临界浓度和处理时间分别为c＝5μmol／L和t＞5h．     

不饱和聚酯树脂生产废水治理技术

不饱和聚酯树脂生产废水CODCr高达 10 0 0 0 0mg/L ,pH为 1— 2 ,且排放无规律 ,处理难度大。采用先对缩聚废水进行蒸馏浓缩 ,再真空泵废水混合调质、降温、缺氧水解后 ,经高效的好氧生物处理工艺 (HCR)处理后与低浓度的冲洗水、生活废水混合 ,进行低负荷的生物接触氧化处理 ,出水CODCr稳定在 10 0mg/L以下。