一株微生物絮凝剂产生菌的培养基优化研究

利用单因子实验和部分因子实验对实验室保藏的产絮凝剂菌种C3的培养基进行优化,以提高C3菌所产生的微生物絮凝剂MBFC3的絮凝效果.实验结果表明,C3菌产MBFC3的最适培养基为: 蔗糖1.0 g,(NH4)2SO4 0.24 g,FeSO4 0.10 g,KH2PO4 0.40 g,MgSO4 0.01 g,NaCl 0.02 g,蒸馏水100 mL,pH值自然.在此培养条件下,C3菌所产生的微生物絮凝剂MBFC3对高岭土悬浮液的絮凝率可达到99.1%.实验中还发现,培养基中(NH4)2SO4和NaCl的用量是影响MBFC3絮凝效果的显著因素.     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

辅料配比对污泥生物-物理联合干燥的影响

利用自主研制的污泥生物-物理联合干燥反应系统研究了脱水污泥∶树皮∶回流污泥分别为7∶3∶0.5、9∶3∶0.5和12∶3∶0.5时,污泥生物-物理联合干燥过程中温度、含水率等参数的变化规律.结果表明,污泥温度随干燥时间延长先增大后减小,含水率在0～96 h逐渐降低,继续延长反应时间,则变化不明显.当脱水污泥∶树皮∶回流...     

基于我国规范与PIARC标准的公路隧道需风量分析

以某长大高速公路隧道为例,结合我国隧道通风设计规范JTJ026.1-1999与PIARC2007标准(世界道路协会),针对不同行车速度,不同车辆更新情况、不同排放标准组合形式以及是否考虑NOx等情况,对各个不同工况的需风量分别进行计算,并从需风量计算方法、机动车排放量和污染物设计浓度三个方面对隧道需风量差异进行分析。研究结果表明:我国设计规范与PIARC2007存在较大差距,为了适应当前及今后我国交通量及机动车排放特点的发展趋势,我国现行规范应在机动车排放量、污染物设计浓度限值等方面做出必要改进以达到合理确定隧道需风量的目的。     

中心组合设计优化S-Cr-TiO2催化剂光降解工艺条件

在确定的温度和光照条件下,采用中心组合设计法研究了固相反应法合成的硫与铬共掺杂二氧化钛(S-Cr-TiO2)光催化剂与水溶苯胺蓝(ANB)可见光降解过程中的三个作用因子:催化剂的浓度、水溶苯胺蓝水溶液的pH值及其初始浓度之间的相互作用关系,得到了影响因子与降解速率之间的回归方程及因素之间相互作用的响应面图.结果表明,S...     

两种抗生素对塔玛亚历山大藻生长和产毒的影响

论文以中国南海筛选的一株塔玛亚历山大藻Alexandrium tamarense C101为研究对象,研究了两种抗生素,氨苄青霉素(ampicillin,Amp)和新霉素(neomycin,Nm)对A.tamarense C101细胞生长、形态以及毒素含量的影响.结果表明:和空白对照组相比,经1 500μg/mL Nm...     

黑岱沟露天矿排土场不同植被配置土壤水分研究——土壤水分垂直动态研究

文章通过黑岱沟露天煤矿排土场不同植被配置土壤水分垂直动态研究,阐述了不同植被配置类型对土壤水分的影响。结果显示：9种植被配置类型的土壤台水量随土层深度的增加而减小,但变化幅度有差异;原生植被处的土壤水分利用层厚度大于人工植被。     

生态经济城市建设的SWOT分析与策略研究——以粤北山区韶关市为研究样本

生态经济城市通过城市生态、经济与社会系统的动态协调,形成一个生态高度有效保护、经济良性高效发展、人与自然和谐相处的整体功能系统,代表了现代和未来城市发展的方向.作为全国首批六个生态文明建设试点地区之一和广东省的生态发展区,韶关市加快生态经济城市建设符合这一发展潮流和趋势.根据SWOT分析方法,对韶关市生态经济城市建设面临的优势、劣势、机遇和挑战进行分析,不仅为韶关生态经济城市建设提供策略依据,而且为其它类似地区的生态经济城市建设提供借鉴.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

上海市环保行政审批系统的设计与实现

上海市环保局行政审批系统采用流程控制和数据传输交换技术,构建了申报系统、审批系统、业务管理系统、跟踪监控系统四部分,实现了包括建设项目环评、固废、辐射等15项行政审批和23项非行政审批事项的“一口受理、一办到底”,通过信息技术实现了外网申报、内网审批,实现了环保审批流程优化再造和审批全过程公开透明,实现了“便民审批”、“高效审批”、“阳光审批”。