厌氧膜-生物反应器抽吸模式对膜过滤性能的影响

研究了厌氧膜-生物反应器处理酒厂废水时抽吸模式对膜过滤性能的影响,分析了膜通量、膜阻力及阻力分布与时间的变化关系,通过数据拟合得出2种运行模式的通量、阻力随时间变化的数学模型方程式．结果表明,压力递增模式可以有效地提高膜通量;同时该模式运行过程中的膜阻力较低,有利于膜-生物反应器的良好运行．     

钻孔间距对水力压裂促抽煤层瓦斯的影响

针对定量确定合理钻孔间距困难问题,基于损伤力学和多场耦合理论,建立了水力压裂和瓦斯抽采的煤层流固耦合模型,包括和水运移场、应力场以及孔隙度、渗透率演化方程,并采用Comsol联合Matlab求解,研究了不同钻孔间距时压裂和抽采过程中煤层弹模、损伤值、渗透率、瓦斯压力、抽采量和压裂贯通时间的变化规律。结果表明:耦合模型可较准确地模拟煤层水力压裂和瓦斯抽采过程;压裂贯通时间与钻孔间距呈指数增长关系;在马堡煤矿,当钻孔间距为4~8 m时,压裂损伤区在抽采孔贯通,渗透率呈“n”型曲线,瓦斯抽采后,瓦斯压力迅速下降,抽采有效区随间距的增加而增大;当钻孔间距为9~12 m时,压裂损伤区未贯通,煤层渗透率呈“m”型曲线,抽采有效区随间距的增加而减小,与间距4~8 m相比,瓦斯抽采量较小。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。     

衡山PM_（2.5）中痕量金属元素的分析

建立了微波消解-电感耦合等离子体质谱法同时测定PM2.5中12种痕量金属元素的方法。对不同消解体系进行了讨论,确定采用HNO3＋H2O2消解体系。方法检出限在0.01～6.4 ng/m3之间,精密度为0.5%～8.9%,加标回收率在69.2%～92.6%之间。应用该方法测定了衡山PM2.5中痕量金属元素的含量,讨论了痕量元素的浓度分布特征,对各元素进行了相关性分析,并应用富集因子法对来源进行了分析。     

高效液相色谱-电感耦合等离子体质谱法测水中不同形态砷

采用高效液相色谱(HPLC)分离水中两种常见的砷形态As(III)、As(V),电感耦合等离子体质谱系统进行检测鉴定,利用C8色谱柱,探讨了甲醇含量、磷酸二氢钾浓度、四丁基氢氧化铵浓度、p H等测试条件,由此建立了水中砷形态的分析方法。结果表明,以1.5 mmol/L磷酸二氢钾、2 mmol/L四丁基氢氧化铵(TBAOH)、5%甲醇作为流动相,调节流动相为p H 5.5,流速为1.4 m L/min,上述两种不同形态的砷可在5.5 min内得以有效分离,As(III)、As(V)检出限分别为0.001、0.01μg/L,定量下限分别为0.005、0.03μg/L。该方法实现了对水中常见的不同形态砷(As(III)、As(V))的同时分析,具有灵敏度高、选择性好、检测速度快的特点,在水质分析领域具有重要意义与应用价值。     

氨基化有机-无机杂化整体柱分离富集环境水中五价砷

将四乙氧基硅烷(TEOS)和N-(β-氨乙基)-γ-氨丙基三乙氧基硅烷(AEAPTES)作为共聚前体,采用在毛细管内原位聚合的方式制备得到氨基功能化的有机-无机杂化整体柱,将其作为针式固相微萃取(SPME)介质,建立了现场分离富集环境水中As(V)的SPME方法,优化了有机-无机杂化整体柱富集As(V)的实验条件,并研究了整体柱对As(V)的吸附/洗脱性能和富集能力,实现了环境水样中As(V)的高效、快速、高选择性检测。     

漂浮负载型光催化剂制备及降解草甘膦研究

以漂珠(FP)为载体,采用溶胶-凝胶-浸渍法制备了漂浮负载型CdS/TiO2/FP复合膜光催化剂,通过SEM、XRD对其结构进行了表征.以甘草膦农药的光催化降解为模型反应,使用不同光源研究了CdS/TiO2/FP的光催化性能,探讨了影响催化剂活性的因素及采用太阳光做光源处理草甘膦的可行性.结果表明,经4层镀膜500℃热处理的20%(w/w)CdS/TiO2/FP光催化剂具有良好的光催化性能,最佳降解条件为:催化剂加入量3 g/L,初始pH 7～9,Fe2 浓度为2.0×10-3 mol/L.通气量200 mL/min.在最佳条件下,对135 mg/L草甘膦溶液降解率可以分别达到96.3%(125 W高压汞灯,60 min)和82.4%(太阳光,180 min).     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

我国农田土壤碳氮耦合特征的区域差异

利用中国第2次土壤普查数据,分析了稻作和旱作方式下农田耕层土壤有机碳和全氮特征及其区域差异。结果表明,水田土壤有机碳和全氮含量分别为旱地的147.8%和145.5%,但水田碳氮含量的区域变异低于旱地。全国水田和旱地土壤有机碳氮比值分别为10.8和9.9,各区域水田土壤碳氮比值普遍高于旱地,其中东北水田最高,而华东旱地和西北旱地最低。旱地碳氮比值的区域变异显著,水田则不显著。农田耕层土壤有机碳和全氮含量呈显著正相关,除华北地区外,各区域无论水田还是旱地其碳氮含量之间相关系数都超过0.8,达极显著水平。由此可见,我国农田耕层土壤有机碳和全氮含量之间存在显著耦合关系,而且不同利用方式和区域之间差异显著;相同氮水平下,水田土壤可能储存更多的有机碳。