嗜热菌株AT07-1的分离鉴定及其在污泥溶解预处理厌氧发酵产氢中的应用

从湖南大学花园土壤中采集样品,用稀释涂布法分离和纯化适于污泥溶解的典型嗜热菌菌株,从中选出一株高效菌进行形态观察,并对其进行生理生化鉴定.结果表明,该菌株的革兰氏染色为阳性,呈细杆状,产芽孢,为好氧或兼性需氧细菌,最适生长温度为65℃,最适生长pH值为6.8~7.5.通过16SrDNA碱基测序和对比证实,该菌株是目前尚未报道过的一株嗜热菌,GenBank中注册命名为Bacillus thermophilic bacteria AT071(注册号:FJ231108).同时,将其纯种菌用于嗜热酶溶解（solubilization by thermophilic enzyme,S-TE）污泥稳定化处理,接种该嗜热菌可促进污泥中悬浮固体的溶解,2.5d时接种试验挥发性悬浮固体 (volatile suspended solid,VSS)溶解率达到59.41%,比不接种试验同期提高了25.58%,达到了EPA规定的污泥稳定化要求.进一步对经AT071预处理的污泥厌氧产氢效果进行研究,试验结果显示,接种处理后污泥发酵产氢效果良好,高出未接种处理（65℃热处理）污泥26.4%,发酵气体中只含有H2和CO2.     

Evaluation of ecological restoration success in mining‐degraded lands

This review article analyzes the importance of assessing the success of ecological restoration by using four indicators: assemblage of the plant and animal communities; enzyme activity; litter accumulation and decomposition; and the improvement of soil quality. These indicators can be used alone or in combinations. Even though the Society for Ecological Restoration International provided a primer containing nine attributes to use as standards for measuring ecological restoration, only three of these attributes could be easily applied due to their low costs and low time requirements. These three attributes include: diversity, vegetation structure, and ecological processes. This review article emphasizes that the criteria for the selection of the indicator species should be based upon: habitat types, abundance of species, ease of measuring, quantifying and interpreting the results, gradual enhancement with time and cost‐effectiveness, sensitivity, variability of response, size, residential status, and requirements of the area. Principal component analysis was applied to calculate the reclaimed mine soil quality index (RMSQI) and the forest soil quality index (FSQI) and the RMSQI value was compared with FSQI (optimum index value of reference ecosystem) to evaluate the restoration success. Available phosphorus, exchangeable magnesium, organic carbon, clay content, field moisture, available nitrogen, electrical conductivity, and pH are identified as the most influential parameters that regulate the health of reclaimed mine soil. Exchangeable calcium, magnesium, cation exchange capacity, sand, silt, clay content, field moisture, available phosphorus, and pH are the controlling properties for forest soil. The observed values of the above‐stated soil indicator properties were converted into a unitless score (0–1.00) and integrated into index calculations (RMSQI and FSQI). The contribution of each soil indicator properties on the calculated index was analyzed, which provides insight into the reason for the measured index. A higher RMSQI indicates better ecological restoration success. The calculated RMSQI was found to be 0.473 in the reclaimed dump, which is 6% lower than the reference ecosystem.     

焦化废水中不同极性组分的光谱分析及可生物降解特性

焦化废水是典型难降解工业有机废水,构成其成分的复杂及种类的繁多使其难以实现高效的生物降解过程,制约了水处理的水质达标.为了探明其中生物降解强抑制组分,采用DAX-8大孔树脂将焦化废水分离出疏水酸性组分(HOA)、疏水碱性组分(HOB)、疏水中性组分(HON)和亲水性组分(HIS)等4种极性不同的组分,分析了各组分的有机物含量分布,紫外吸收光谱和三维荧光光谱,并用两种方法考察了各组分的可生物降解性能.结果表明,HOA是主要的有机组分,其COD和TOC分别占比55.9%和56.8%;HOA也是主要的芳香物质及荧光组分,而HON是芳香构造化程度最高和类腐殖质占比P(Ⅲ+Ⅴ)最高的组分;各组分的BOD5/COD值及脱氢酶活性的抑制结果显示其难降解程度依次为HONHOBHIS原水HOA,而HON是焦化废水中生物抑制最强组分,其BOD5/COD值仅为0.21±0.02,对脱氢酶活性的抑制达到38.5%;SUVA和P(Ⅲ+Ⅴ)与可生物降解性的关联分析发现,焦化废水中难降解组分并不都是芳香性化合物造成的,类腐殖质对其中难降解有机组分的指示作用相比SUVA更加灵敏.     

厌氧发酵产沼气过程中脱氢酶活性检测工艺及其优化

为了优化脱氢酶活性这一指标在厌氧发酵产沼气系统中的检测方法,分别以小麦秸秆、羊粪及其混合原料(质量比1∶1)为发酵底物,通过Box-Behnken试验及响应面分析法确定并优化了沼气发酵系统中碘硝基四唑紫法脱氢酶活性的检测工艺,并对脱氢酶活性与甲烷产量进行了相关性分析.结果表明,3种底物均以乙醇作为萃取剂,以甲醛作为终止剂时显色效果最好.分别以秸秆、粪便及其混合为发酵底物时,脱氢酶检测在pH值分别为6.5、7.2、7.7,反应温度均在37℃下,碘硝基四唑紫质量分数均为0.15%,反应时间均为50 min时比色效果最好.相关性分析显示,厌氧发酵产沼气系统中脱氢酶活性与甲烷产量相关性显著.     

商陆耐重金属Cd关键酶抗氧化酶的研究

研究商陆(Phytolacca americana L.)对Cd胁迫的抗氧化酶响应,对于揭示其耐Cd机制具有重要意义.商陆幼苗在200μmol/L或400 μmol/L CdCl2营养液中处理4 d,叶片活性氧自由基和MDA含量升高,膜透性增加,光合速率降低,表明Cd胁迫诱导产生氧化胁迫.随着Cd处理含量的提高和时间的...     

造纸废水中有机氯化物的酶处理技术研究进展

目前用于造纸废水有机氯化物处理的酶包括：过氧化物酶、酪氨酸酶、酚氧化酶和木质素过氧化酶等,反应机理是,先通过酶反应形成游离基,然后游离基发生化学聚合反应生成高分子化合物沉淀,影响酶处理效率的主要因素包括污染物种类和浓度,酶的种类和浓度、ｐＨ、絮凝剂和吸附剂以及污染物之间的协同效应等。     

苯酚在预活化聚酰胺膜酪氨酸酶生物传感器上的响应特性

研究苯酚在预活化聚酰胺膜酪氨酸酶生物传感器上的响应特性,适量儿茶酚的存在可加快传感器到达恒态的速度。被固定酶的量、活性及传感器的有效面积等是影响检测灵敏度的主要因素。首次采用预活化聚酰胺膜固定酪氨酸酶,并与浸蜡石墨电极组合成酪氨酸酶生物传感器,在温度２５℃电位－０．２００ＶｖｓＳＣＥ,儿茶酚浓度５×１０（－７）ｍｏｌ／Ｌ,底液０．１ｍｏｌ／Ｌ磷酸盐缓冲溶液ｐＨ６．５０下,采用电流法测定苯酚及水样中的酚。酶膜的制备、替换和贮存极为方便,酶膜贮存５个月未见活性下降,有良好的重现性和线性范围２×１０（－７）－１．２５×１０（－５）ｍｏｌ／Ｌ。     

多孔柔性载体在非流化状态下处理污水的效能

对自行研制的多孔柔性载体在非流化状态下,处理低浓度有机污水的效能及生物活性进行了试验,结果表明：污水经处理后,检测指标ＣＯＤＣｒ去除率８０％以上,ＢＯＤ５去除率９０％以上;多孔柔性载体表面附着生物活性较高,可作为良好的生物载体。     

曲霉AH625产酶条件与酶液降解制备壳寡糖

从特定土壤中分离出一株能分泌胞外甲壳酶的高产菌株曲霉AH62 5 ,在以甲壳素为唯一碳、氮源的平板上长势良好 ,该菌株在生长培养基中振荡培养 72h ,再转移至诱导培养基中培养 2 4h ,酶活力可达 0 .51 2u/mL。研究表明 ,该菌株的最佳产酶条件是 :温度2 8℃ ,起始 pH4 .8,诱导底物为 1 .5 %的水溶性壳聚糖 ,0 .1 %的表面活性剂Tween80能使产酶量提高 2～ 3倍。用粗酶液在 50℃ ,pH5 .0条件下降解壳聚糖 ,得Mw 为 1 1 2 7,Mw/Mn 为 1 .53的壳寡糖。