混合酶强化剩余污泥微生物燃料电池性能

为了提高剩余污泥为燃料的微生物燃料电池(SMFC)产电性能以及污泥减量化效果,在不同的温度(40、45和50℃)研究单室无膜微生物燃料电池中酶对SMFC产电特性的强化效果.加入单一酶(蛋白酶或α-淀粉酶)的结果表明,随着温度的上升,SMFC功率密度均上升,但40℃时强化效果最明显,与加入失活酶的对照组相比分别增加198％和130％.在40℃下,混合酶比(蛋白酶浓度:淀粉酶浓度)为2∶3时,SMFC最大功率密度为776 mW/m2.随着混合酶中淀粉酶的比例提高,SMFC库伦效率逐渐增加,当混合酶比为4∶1时,CE(库伦效率)可达18.3％,同时TCOD、TSS和VSS去除率分别为70.3％、66.7％和80.4％.因此,温度相对较低时,外加酶强化效果更明显;与单种酶相比,混合酶对SMFC产电性能和污泥减量化的强化效果更显著.     

电除尘器电源交流分量对PM_(2.5)等细微颗粒物除尘效率的影响

除尘器对颗粒物的除尘效率与颗粒物的荷电量密切相关,PM2.5等细小颗粒物由于其荷电量不足而导致其吸收效率较低,对环境造成危害。为了增加粒子的荷电量,以粒子荷电原理为理论依据,从离子电流密度和通过电凝并扩大尘粒中位径2个方面研究了电除尘电源中交流电压分量对PM2.5等细小颗粒物荷电特性的影响,得出了电除尘器电源中交流电压分量可从以上2个方面提高装置对PM2.5等微小颗粒物的荷电量,且频率越高,幅值越大,荷电效果越好,从而可以提高装置对细小颗粒物的除尘效率。     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

Toward accurate and precise estimates of lion density

Reliable estimates of animal density are fundamental to understanding ecological processes and population dynamics. Furthermore, their accuracy is vital to conservation because wildlife authorities rely on estimates to make decisions. However, it is notoriously difficult to accurately estimate density for wide‐ranging carnivores that occur at low densities. In recent years, significant progress has been made in density estimation of Asian carnivores, but the methods have not been widely adapted to African carnivores, such as lions (Panthera leo). Although abundance indices for lions may produce poor inferences, they continue to be used to estimate density and inform management and policy. We used sighting data from a 3‐month survey and adapted a Bayesian spatially explicit capture‐recapture (SECR) model to estimate spatial lion density in the Maasai Mara National Reserve and surrounding conservancies in Kenya. Our unstructured spatial capture‐recapture sampling design incorporated search effort to explicitly estimate detection probability and density on a fine spatial scale, making our approach robust in the context of varying detection probabilities. Overall posterior mean lion density was estimated to be 17.08 (posterior SD 1.310) lions >1 year old/100 km², and the sex ratio was estimated at 2.2 females to 1 male. Our modeling framework and narrow posterior SD demonstrate that SECR methods can produce statistically rigorous and precise estimates of population parameters, and we argue that they should be favored over less reliable abundance indices. Furthermore, our approach is flexible enough to incorporate different data types, which enables robust population estimates over relatively short survey periods in a variety of systems. Trend analyses are essential to guide conservation decisions but are frequently based on surveys of differing reliability. We therefore call for a unified framework to assess lion numbers in key populations to improve management and policy decisions.     

长江口海域底栖生态环境质量评价——AMBI和M-AMBI法

AMBI(AZTI’s Marine Biotic Index)和M-AMBI(Multivariate-AMBI)指数可以有效地评价河口和近岸海域软底质海洋大型底栖动物群落对人为和自然扰动的响应.本研究根据2009年4月在长江口采集的大型底栖动物资料,首次在长江口海域同时运用栖息密度和生物量计算AMBI(BAMBI)和M-AMBI(M-BAMBI),对其进行底栖生态质量评价.结果表明,长江口底栖生态环境皆受到不同程度的干扰,其中受干扰最严重的区域集中在杭州湾、舟山及长江口门区附近海域,与该海域的陆源排污、富营养化以及大量的海岸工程建设等有密切的关系.单因素方差分析表明,运用栖息密度和生物量计算出的两个指数值,评价结果无明显的差异.与AMBI相比,M-AMBI与本研究生物群落结构参数以及环境因子的匹配度更高,能够更有效地评价长江口底栖生态环境质量.Pearson相关分析和一元线性回归分析表明,M-AMBI与底层水体的富营养化指数之间存在线性显著负相关关系,而与表层水体的呈非线性显著负相关;AMBI与富营养化指数之间却无显著相关关系,说明M-AMBI更适合指示长江口水域的富营养化压力.     

人为干扰对小兴安岭森林湿地土壤碳组分和酶活性的影响

以小兴安岭落叶林沼泽湿地为研究对象,对比研究皆伐地、火烧地和落叶松湿地土壤碳组分和酶活性.结果表明:(1)3种湿地类型土壤SOC含量表现为对照地显著高于皆伐地和火烧地(p0.05),在0~10 cm土层中皆伐地与对照地相比降低了58.38%,火烧地与对照地相比降低了61.96%.皆伐地与火烧地在不同土层的土壤中SOC含量差异不显著(p0.05);DOC含量对照地显著高于皆伐地和火烧地(p0.05).在0~10cm土层中火烧地DOC含量是皆伐地的1.99倍,两者差异不显著(p0.05);不同干扰方式对土壤MBC含量影响的差异主要表现在0~10 cm的土层土壤,对照地分别比皆伐地和火烧地高23.13%和95.79%(p0.05).在不同的土层中皆伐地MBC含量均大于火烧地,与SOC含量的变化趋势一致.(2)与对照地相比,皆伐地与火烧地0~10 cm土层的土壤蔗糖酶活性分别降低了45.59%和36.76%,脲酶活性显著降低了18.22%和55.69%(p0.05),蛋白酶活性降低了19.65%和17.34%,淀粉酶活性降低了6.29%和10.69%.土壤碳组分和酶活性在垂直方向上均表现为随着土层深度增加而减小.皆伐和火烧造成森林湿地土壤碳组分和酶活性降低.     

川东北低山丘陵区细颗粒物主要相关因素和季节变化分析——以南充主城区为例

基于中国空气质量在线监测分析平台和全球天气精准预报网的大气质量和气象数据,以四川盆地东北低山丘陵区典型城市南充市主城区为例,检验了细颗粒物(PM_(2.5))浓度的概率密度分布,发现其接近对数正态分布,由相关分析确定了PM_(2.5)浓度的主要相关因素为CO、NO_2(相关系数r分别为0.76、0.55,P0.01),再通过对2014年1月—2016年6月的日数据的逐步回归筛选出最优的回归指标和模拟方程(决定系数R_(adj)~2为0.68,P0.05),2016年7月—2017年6月的数据验证表明模拟效果较好(拟合优度为0.64,相对误差15.48%);最后根据时序插值、浓度和IAQI(PM_(2.5))的时段均值发现PM_(2.5)浓度在年际上有降低趋势;在季节上由高到低依次为冬季、春季、秋季、夏季;PM_(2.5)浓度在1月和6月分别呈现出年内的峰值和谷值,5、10月出现了阶段性峰值,尤其是5月;IAQI(PM_(2.5))的季节变化与浓度变化规律相似;且PM_(2.5)与PM_(10)比值的均值为0.67,表明现阶段南充市主城区大气污染物中细颗粒物占有较大比重。     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.     

贵州石漠化空间分布与喀斯特地貌、岩性、降水和人口密度的关系

本次研究从地貌发育的角度揭示了贵州省石漠化景观及其等级的空间分布与下垫面的物质组成和气候(降雨量)的空间变化存在着密切的联系,而与现今人类活动强度(人口密度)的空间分布不存在关联性。具体体现为:(1)贵州溶蚀为主地貌类型区和纯碳酸盐岩分布区基本一致,区内的峰丛(林)地貌主要分布于年降水量≥1200mm的威宁-毕节-贵阳-凯里一线以南的溶蚀为主地貌类型区,随着降水量由北向南逐渐增加,塔状峰丘增多;溶丘,峰丛(林)不发育地貌主要分布于年降水量≤1100mm的威宁-毕节以北的黔西北溶蚀为主地貌类型区和毕节-贵阳-凯里一线以北的溶蚀侵蚀地貌类型区,(2)贵州石漠化程度与喀斯特地貌类型空间分布的耦合关系较好,与人口密度空间分布的耦合关系不好。峰丛(林)地貌发育的威宁-毕节-贵阳-凯里一线以南的溶蚀为主地貌区,黔中地区人口密度为300～400/km2,该区一些县的石漠化,远不如黔西南地区人口密度为200～300/km2或黔南地区人口密度为100～200/km2的严重。历史时期森林植被的全面破坏是贵州喀斯特地区石漠化的主要驱动力,除荔波茂兰喀斯特森林保护区等少数地区,贵州喀斯特地区的原始森林无论是现在人口密度高的地区,还是低的地区,历史时期均已遭受全面的破坏。喀斯特坡地次生植被的恢复状况在很大程度上取决于坡地的岩土组成,现代石漠化严重程度的区域差异,主要受下垫面地面物质组成的控制,也就是"石山"的多寡。     

石化企业玻璃钢设施静电特性及安全使用

通过测试玻璃钢设施的静电参数,研究分析玻璃钢设施的静电特性,表明玻璃钢设施有较大的静电危险性,提出了一般防静电措施,预防玻璃钢设施的燃爆风险。