篦齿眼子菜对废水中氮和磷的去除行为研究

一些常见的沉水草本植物对水质具有较强的净化作用,能够有效控制氮和磷的浓度.本试验通过模拟氮、磷污染的水质条件,采用篦齿眼子菜对氮、磷营养盐的吸附和去除效果进行研究.结果 表明:设定模拟废水中的初始总氮(TN)浓度在1～50 mg/L范围内,培养30天后的植株对总氮的去除率最高可达85.4％,随着初始培养环境中总氮浓度的...     

兰西城市群县域土地利用效率时空差异研究

在考虑绿色发展内涵的基础上,运用SBM-Undesirable模型测度了2006—2018年兰西城市群县域土地利用效率值,并采用泰尔指数、空间自相关方法揭示其时空差异特征。结果表明:①2006—2018年兰西城市群县域土地利用效率稳步提升,区域差异先扩大后缩小。②兰西城市群县域土地利用效率呈现“中部高—外围低、西高东低、南北分异”的空间差异规律,两省域呈现“西—东”的递减规律。③兰西城市群县域土地利用效率空间集聚特征显著,局部范畴上高—高集聚区在中部地区较为典型,低—低集聚区出现由东南向西南的扩散现象。     

水合物法海水淡化脱盐效率研究

采用水合物生成装置分别加入二氧化碳和甲烷气体通过水合物法进行2组海水淡化实验。每组实验分别提取3次不同反应时间的水合物晶体,检测水合物中Na+、Mg2+、K+、Ca2+、B3+的离子浓度。结果表明:CH4水合物形成过程中,盐离子的脱盐效率与离子半径和所带电荷量呈线性相关性。CO2水合物生成实验中,由于Ca2+与CO2-3反应生成Ca CO3颗粒,故Ca2+离子浓度变化与离子半径和电荷量呈非线性关系。同时提出更全面的水合物法海水淡化中盐离子的排斥机制。较于反渗透传统方法,水合物法具有脱硼效果好的优势。     

Higher-efficiency for combined photovoltaic-thermoelectric solar power generation

Solar energy application in a large spectrum has the potential for high-efficiency energy conversion. Though, solar cells can only absorb photon energy of the solar spectrum near their band-gap energy, and the remaining energy will be converted into thermal energy. The use of the thermoelectric generator becomes a necessity for convert this thermal energy dissipated so as to increase efficiency conversion.

This paper analyses the feasibility of photovoltaic-thermoelectric hybrid system and reviews their performance in order to optimize harvested energy. Regarding the thermoelectric effect, a new method of the ambient energy harvesting is presented. This method combines thermoelectric generators and the effects of heat sensitive materials associated to photovoltaic cells in phase change for generating both energy day and night. Experimental measures have been conducted primarily in laboratory conditions for a greater understanding of hybridization phenomena under real conditions and to test the actual performance of devices made. Results show that the hybrid system can generate more power than the simple PV and TEG in environmental conditions. This hybrid technology will highlight the use of renewable energies in the service of the energy production.     

Use of artificial roughness for performance enhancement of solar air heaters—a review

The performance characteristics of a solar air heater can effectively be improved by providing artificial roughness in the form of protrusions and dimples of various shapes, sizes, and orientations on the underside of heated surface. An extensive literature review on artificial roughness elements has been carried and the correlations developed for heat transfer and friction factor for roughened solar air collector have been discussed and presented in this paper. The performance parameter has also been computed and compared with various kinds and shapes of roughness geometries using correlations developed by various investigators. The optimum values of the roughness parameters obtained by several investigators have also been discussed.     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

Automated energy management in distributed electricity systems: An EEPOS approach

The increasing capacity of distributed electricity generation brings new challenges in maintaining a high security and quality of electricity supply. New techniques are required for grid support and power balance. The highest potential for these techniques is to be found on the part of the electricity distribution grid.

This article addresses this potential and presents the EEPOS project’s approach to the automated management of flexible electrical loads in neighborhoods. The management goals are (i) maximum utilization of distributed generation in the local grid, (ii) peak load shaving/congestion management, and (iii) reduction of electricity distribution losses. Contribution to the power balance is considered by applying two-tariff pricing for electricity.

The presented approach to energy management is tested in a hypothetical sensitivity analysis of a distribution feeder with 10 households and 10 photovoltaic (PV) plants with an average daily consumption of electricity of 4.54 kWh per household and a peak PV panel output of 0.38 kW per plant. Energy management shows efficient performance at relatively low capacities of flexible load. At a flexible load capacity of 2.5% (of the average daily electricity consumption), PV generation surplus is compensated by 34–100% depending on solar irradiance. Peak load is reduced by 30% on average. The article also presents the load shifting effect on electricity distribution losses and electricity costs for the grid user.     

长江经济带绿色城镇化效率评价及其影响因素——基于多维城镇化视角

本文引入资源和环境因素,以城镇化综合指数为期望产出,运用SBM方向性距离函数测算了2010—2020年长江经济带112个地级市（州）的绿色城镇化效率,并采用空间面板模型和地理探测器对绿色城镇化效率的影响因素进行实证分析。结果表明：长江经济带绿色城镇化效率整体水平不高,下游地区绿色城镇化效率高于上游和中游地区,资源消耗和环境污染是效率损失的主要来源;绿色城镇化效率表现出较为明显的热点—次热点—次冷点—冷点自东向西的带状分布格局,存在显著的空间正相关性。政府财政支出对绿色城镇化效率产生负向影响,外商直接投资和产业结构对提升绿色城镇化效率有显著的促进作用,且三者的影响具有地区差异性;市场力因素有利于绿色城镇化效率的提高。邻近城市间绿色城镇化效率的空间溢出效应明显,且空间溢出效应是长江经济带绿色城镇化效率空间差异的最主要因素,各因素的影响具有协同增强的作用。     

移动电极电除尘器除尘效率的计算

移动电极静电除尘器通过清灰刷除掉阳极板上收集的粉尘,阳极系统为移动电极（即作回转运动的集尘极）阳极板呈带条状,固定在链条上,随链轮转动。移动电极静电除尘器有效克服了困扰常规电除尘器对高比电阻粉尘的反电晕及振打二次扬尘等问题,大幅度提高了除尘效率。提供常规固定电极除尘区与移动电极除尘区联合使用的除尘器除尘效率计算公式。     

某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求,大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况,归纳了3种可行的脱硫增容改造方案,即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环,阐述了各自的技术特点,结合性能保证、工程投资、施工周期等影响因素,比较了各方案的优缺点。经过对比和论证,双吸收塔方案比单吸收塔方案更适合于本次工程改造。