接触絮凝-氧化法处理活性染料废水

将接触絮凝工艺应用于活性染料废水的处理,具有处理效果好、产泥量少、处理费用低等特点。经接触絮凝工艺后,废水的CODCr由3639mgL降低到1463mgL;再经H2O2Fe2+氧化法处理,CODCr进一步降低到220mgL,色度去除率达到98%以上,基本达到排放要求。     

在流动式电解槽中氨氮废水的间接电氧化

研究了氨氮废水在流动式电解槽中的间接电化学氧化,讨论了氯离子浓度、电解液流速、氨氮初始浓度对氨氮去除的影响结果表明,氯离子浓度和电解液流速对氨氮的去除速率有很大的影响当电流密度为50mA·cm-2、流速为50ml·min-1时,氨氮去除速率常数为389×10-5g·l-1·m-1·s-1,去除1kg氨的氮能耗为557kWh     

废水催化湿式氧化稀土金属氧化物催化剂的研制

采用共沉淀法制得锰铈复合氧化物催化剂,催化湿式氧化处理高浓度苯酚废水。通过正交实验筛选催化剂制备条件,单因素实验优化制得催化剂。研究了CWAO处理废水条件下的金属离子溶出和催化剂的表征。结果表明,该催化剂在低温低压条件下具有优良的湿式氧化催化活性,且金属离子溶出量低,是一种CWAO处理高浓度有机废水中极具应用前景的新型高效催化剂。     

接触氧化-人工湿地去除印染废水中的COD

采用絮凝沉淀+接触氧化+人工湿地工艺处理印染废水中COD研究。结果表明,斜板沉淀池出水COD平均值为1322mg/L,此间COD去除率为38·6%;二沉池出水COD平均值为71mg/L,此段COD去除率达94·6%;人工湿地出水COD平均值为37mg/L,人工湿地COD去除率为48·0%。处理设施COD总去除率98·3%。     

催化湿式氧化农药废水及催化剂的研究

通过浸渍法制备了4种氧化物为主活性组分的负载固定型催化剂,用于过氧化氢催化湿式氧化(CWHPO)处理有机农药废水。用实验确定了催化湿式氧化的条件,不同催化剂处理效果的比较表明,四元组合MnO2CuOCeO2CoO催化剂性能较好,当反应在常温常压下,维持pH=7～9,反应时间为40min时,COD的去除率大于80%,色度去除率大于90%。     

盐分对一株硫氧化细菌氧化能力的影响

通过液体选择培养基、平板划线的方法从脱硫污泥中分离筛选出一株硫氧化细菌,并对其进行初步鉴定和生长特性的分析.结果表明,该细菌为化能自养型细菌,短杆状,大小为0.5～0.8 μm×1.2～3.0 μm,革兰氏染色显阴性.以5％的接种量接种于富集培养基,S2-初始浓度为100 mg/L时,SOB在60 h内基本将还原态硫氧化完全,pH最低降到2左右.当溶液中有SO42-量积累和电导率升高后,对SOB氧化S2O32-过程有明显的抑制作用.该菌株对盐分的耐受值为7 650 μS/cm(以电导率计).     

Mitigation of methane emission from an old unlined landfill in Klintholm,Denmark using a passive biocover system

Methane generated at landfills contributes to global warming and can be mitigated by biocover systems relying on microbial methane oxidation. As part of a closure plan for an old unlined landfill without any gas management measures, an innovative biocover system was established. The system was designed based on a conceptual model of the gas emission patterns established through an initial baseline study. The study included construction of gas collection trenches along the slopes of the landfill where the majority of the methane emissions occurred. Local compost materials were tested as to their usefulness as bioactive methane oxidizing material and a suitable compost mixture was selected. Whole site methane emission quantifications based on combined tracer release and downwind measurements in combination with several local experimental activities (gas composition within biocover layers, flux chamber based emission measurements and logging of compost temperatures) proved that the biocover system had an average mitigation efficiency of approximately 80%. The study showed that the system also had a high efficiency during winter periods with temperatures below freezing. An economic analysis indicated that the mitigation costs of the biocover system were competitive to other existing greenhouse gas mitigation options.     

环糊精键合Fe-TAML催化剂的制备及其活化H2O2氧化水中有机微污染物

为了提高Fe-TAML催化剂的稳定性和催化活性,通过磺酰氯化反应、金属螯合反应和亲核取代反应等方法将Fe-TAML与环糊精(CD)以共价键形式结合,制备了单-6-氧-CD键合Fe-TAML催化剂(CD-Fe-TAML).开展了CD-Fe-TAML的催化活性、稳定性测试及其活化H₂O₂氧化降解水中抗生素和农药等34种有机微污染物研究.与Fe-TAML相比,CD-Fe-TAML在pH为7.0条件下活化H₂O₂生成高价铁的速率提高49倍,对底物的催化降解速率提高25倍,且其自氧化速率降低70%.CD-Fe-TAML在pH为3.0～10.0范围内的稳定性比Fe-TAML的稳定性提高0.7～699倍,其中,在pH为3.0～7.0范围内提高33～699倍.CD-Fe-TAML的分子结构中的磺酸基官能团具有吸电子效应,能增加活性中心中Fe离子的正电荷密度,不仅加快H₂O₂的过氧键裂解和高价铁物种的生成,提高Fe-TAML的催化活性,还能提高其水解稳定性.同时,分子结构中...     

高浓度木糖醇有机废水处理工艺技术研究

在木糖醇的生产工艺中,废水污染物产生量主要集中于木糖生产过程,从生产性质分析,木糖生产属天然原料加工过程,虽不合有毒性或重金属污染成份,但其排放废水属高浓度有机废水、pH值较低、色度较高,并且含有难以生物降解的木质素等天然大分子化合物,有一定的处理难度。针对其水质特性,本研究选择适合木糖醇废水水质特点、有机物去除率高、耐冲击负荷强、运行简单的混凝沉淀一厌氧水解一好氧生化一化学氧化相结合的处理工艺,将生化与物化方法相结合,最后达到理想的效果,也为同类型工业废水处理提供参考经验。     

Electrochemical detection and degradation of ibuprofen from water on multi-walled carbon nanotubes-epoxy composite electrode

This work describes the electrochemical behaviour of ibuprofen on two types of multi-walled carbon nanotubes based composite electrodes,i.e.,multi-walled carbon nanotubes-epoxy(MWCNT) and silver-modified zeolite-multi-walled carbon nanotubes-epoxy(AgZMWCNT) composites electrodes.The composite electrodes were obtained using two-roll mill procedure.SEM images of surfaces of the composites revealed a homogeneous distribution of the composite components within the epoxy matrix.AgZMWCNT composite electrode exhibited the better electrical conductivity and larger electroactive surface area.The electrochemical determination of ibuprofen(IBP) was achieved using AgZMWCNT by cyclic voltammetry,differential-pulsed voltammetry,square-wave voltammetry and chronoamperometry.The IBP degradation occurred on both composite electrodes under controlled electrolysis at 1.2 and 1.75 V vs.Ag/AgCl,and IBP concentration was determined comparatively by differential-pulsed voltammetry,under optimized conditions using AgZMWCNT electrode and UV-Vis spectrophotometry methods to determine the IBP degradation performance for each electrode.AgZMWCNT electrode exhibited a dual character allowing a double application in IBP degradation process and its control.