Denitrification and phosphorus uptake by DPAOs using nitrite as an electron acceptor by step-feed strategies

Denitrifying phosphorus accumulating organisms (DPAOs) using nitrite as an electron acceptor can reduce more energy. However, nitrite has been reported to have an inhibition on denitrifying phosphorus removal. In this study, the step-feed strategy was proposed to achieve low nitrite concentration, which can avoid or relieve nitrite inhibition. The results showed that denitrification rate, phosphorus uptake rate and the ratio of the phosphorus uptaken to nitrite denitrified (anoxic P/N ratio) increased when the nitrite concentration was 15 mg·L^-1 after step-feeding nitrite. The maximum denitrification rate and phosphorus uptake rate was 12.73 mg NO2-–N·g MLSS-1?h-1 and 18.75 mg PO43-–P·g MLSS-1?h-1, respectively. These rates were higher than that using nitrate (15 mg·L^-1) as an electron acceptor. The maximum anoxic P/N ratio was 1.55 mg PO43--P?mg NO2--N-1. When the nitrite concentration increased from 15 to 20 mg NO2--N?L-1 after addition of nitrite, the anoxic phosphorus uptake was inhibited by 64.85%, and the denitrification by DPAOs was inhibited by 61.25%. Denitrification rate by DPAOs decreased gradually when nitrite (about 20 mg·L^-1) was added in the step-feed SBR. These results indicated that the step-feed strategy can be used to achieve denitrifying phosphorus removal using nitrite as an electron acceptor, and nitrite concentration should be maintained at low level (<15 mg·L^-1 in this study).     

Optical and Chemical Methods of Metal Ash Analysis and Tin Recovery

‘Metal ash’ presents a waste disposal problem in most of the developing countries as the industries employ obsolete technologies. In this paper we describe analysis of tin ash, zinc ash and aluminium ash by means of optical methods, such as X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), electron probe micro analysis (EPMA), scanning electron microscopy (SEM) and chemical methods. The results of tin ash obtained by XRD method matched well with the cassiterite, a naturally occurring mineral of tin. ICP-MS studies reveal the presence of a large number of tracer metals, which may cause pollution by tertiary dispersion and this aspect is discussed. Conversely, the data generated by chemical methods are limited. However, the methods are simple and cost-effective. Then, they can easily be adopted by low-budget industries. Simple and cost-effective process to recover tin from tin ash is described. It is based on heating tin ash with sodium cyanide to about 900°C to separate tin component from the metal ash. The process recovers good quality tin and offers a very high yield. The process can be scaled up to small pilot plant.     

草原退化与恢复过程中土壤有机矿质复合体分组研究

对采自处于不同发展方向和阶段的草原土壤分组提取有机矿质复合体,并对它的质量分数、腐殖质质量分数和组成、Ｃ／Ｎ比值等的变化做了分析,试图从土壤复合体变化的角度去认识草原的退化和恢复过程。研究发现土壤腐殖质绝大部分集中于粘粒和粉粒级复合体;退化草原恢复时,复合体腐殖质质量分数增加,并且组成也发生变化;而草原轻度退化时,复合体腐殖质质量分数会减少,但组成不会变化。     

单甲脒饱和蒸气压的测定和估算

用气体的法测单甲脒在１５,２５,３５和４５℃时的饱和蒸气分别为０．２０２,０．５５４６,１．９５,６．２９Ｐａ;亨利常数计算值分别为６．３０×１０＾－４,１．６７×１０＾－３,５．６８×１０＾０－３和１．７８×１０＆－２,根据Ｃｌａｕｓｉｕｓ Ｃｌａｐｅｙｒｏｎ方程求出单甲脒在常温下气化热为８９．２ｋＪ．ｍｏｌ＾－１。     

液晶显示器液晶处理与铟回收技术

在实验室条件下,对液晶显示器回收的各个重要环节作了初步的探索,提出了一整套回收工艺.其中包括利用丙酮常温浸取去除偏光片、分离玻璃基板、溶解液晶,还包括利用硫酸溶液和二氧化锰联合浸取玻璃基板,铟的浸取率达89%.得到的铟的酸液经过萃取、置换和电解,可以得到铟的产品,为液晶显示器的资源化和无害化提供实验数据和技术支持.     

超临界CO2回收线路板工艺研究

采用正交试验设计进行了超临界CO₂回收废弃印刷线路板的实验。以温度、压强、时间和夹带剂为实验因素,通过对实验前后样本在重量、厚度、弯曲强度和断裂强度四方面变化的分析考察了各实验因素对实验效果的影响。实验结果表明,影响超临界CO₂法回收印刷线路板的最主要因素为温度、时间和夹带剂,超临界CO₂法回收废弃印刷线路板的最佳工艺条件：温度270℃,压强大于7.38 MPa,时间3 h,夹带剂(水)160 mL。实验进一步验证了压强对实验结果的非显著性影响。     

含弱约束端面直角管道汽油蒸气爆炸及七氟丙烷抑爆研究

为研究七氟丙烷对汽油蒸气爆炸抑制作用,搭建含弱约束端面直角管道汽油蒸气爆炸抑制实验系统,开展汽油蒸气爆炸实验研究,并与喷入七氟丙烷抑爆介质进行对比,分析爆炸超压值、火焰强度值和火焰传播速度等爆炸特性参数变化情况.结果表明:在1.3％,1.5％和1.7％汽油蒸气体积分数下,不加抑爆介质时,爆炸超压值、火焰强度和火焰传播速...     

物理气相沉积硬质耐腐蚀磨损防护涂层研究进展

叙述了用物理气相沉积技术制备的硬质耐腐蚀磨损防护涂层的研究进展。重点介绍了腐蚀磨损耦合工况特性和作用机理,单元、多元掺杂氮化物涂层,高熵氮化物涂层,多层、纳米多层、纳米复合、梯度氮化物涂层耐腐蚀磨损性能研究,非金属元素/金属元素掺杂DLC涂层、多层复合DLC涂层耐腐蚀磨损性能研究,并对涂层改性、强化机理和腐蚀磨损失效机制进行了总结。最后,提出了未来物理气相沉积硬质耐腐蚀磨损防护涂层重点发展的方向,应重点发展涂层组元/结构设计、力–电耦合损伤机理研究、高效率研发设计、涂层先进制备装备与评估体系等方面的能力。     

碳酸根对磷酸钙沉淀反应回收磷的影响简

以模拟的厌氧消化液为处理对象,通过小试实验,考察不同初始磷浓度C_P、Ca/P物质的量比、pH和温度下,碳酸根（CO₃^2-）对磷酸钙沉淀反应回收磷的影响;利用扫描电镜（SEM）、X射线衍射仪（XRD）和傅里叶变换红外光谱（FTIR）对沉淀产物进行表征。结果表明,高浓度的CO₃^2-对以磷酸钙沉淀反应去除和回收磷的效率影响较大;C_P相同时,CO₃^2-浓度（C_CO3^2-）越大,P的去除率越低,低C_P（20 mg/L）时尤为显著;当C_CO3^2-相同时,随着C_P的增大,反应速率加快,P的去除率逐渐升高,但升高幅度越来越小;增大Ca/P比和pH能提高P的去除率,降低CO₃^2-对磷酸钙沉淀反应的抑制作用,综合考虑实际效果,应选择Ca/P比为3.33,pH为9.0作为适宜的反应条件;升高温度对降低CO₃^2-对磷酸钙沉淀反应的抑制作用贡献不大。在C_P为60 mg/L,Ca/P比为1.67,pH为9.0,温度为20℃的条件下,当C _CO3^2-为0时,得到的沉淀产物主要为羟基磷灰石HAP;当C _CO3^2-为30 mmol/L时,得到的沉淀产物为磷酸钙和碳酸合磷灰石的混合物。     

关于改善石家庄市空气质量的建议

针对电力和供热导致石家庄市空气污染严重的问题，结合该市目前的电力和供热现状，提出了减少污染的措施及建议，希望对改善该市空气质量起到促进作用。