气态硫闪爆事故原因分析及对策

对处理硫磺回收装置高温掺合阀故障时发生的硫闪爆事故进行了分析,提出了相应的对策.     

硫磺回收装置腐蚀原因及防护措施

针对国内硫磺回收装置实际生产中存在的设备腐蚀问题,根据不同的腐蚀机理进行了腐蚀分类,分析了腐蚀原因并提出了具体的防护措施.     

应对二氧化碳浓度上升问题的研究:CO_2的捕获、储存与利用

为了缓解日益严重的CO2浓度升高导致的温室效应等环境问题,针对各国CO2过量排放与温室效应逐渐加剧的现状,讨论传统CO2减排方法与CO2的捕获、储存与利用(CCSU)的优缺点和优势互补,论述针对大型CO2排放点的减排措施——CCSU的必要性。对CCSU进行系统的介绍和认识,并对CCSU所包含的各种捕获技术、储存技术以及利用技术的特点进行对比和分析,论述其适用范围、地域和经济因素。结合国外一些现有的应用CO2的先进技术和经验,对CO2的捕获与利用的联用作出分析和展望。尤其是CO2的化工利用具有广阔的研发和发展前景,CO2EOR(CO2提高采收率技术)在技术和经济上具有实际应用意义。为新型环保型能源体系的建设提供参考。     

裂解气脱硫新趋势

在回顾现有裂解气脱硫工艺的基础上，介绍了近年来国内外在该领域的研究和应用中所取得的进展及未来的发展趋势。     

废催化剂中金属的回收

简述了含有铂、钒、镍金属组分的废催化剂来源及金属回收工艺，介绍了萃取法在金属回收中的应用。     

空气涡轮制冷低温粉碎法回收废弃橡胶

利用带回冷循环的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻、粉碎、制成６０目以上的精细胶粉。此法的冷冻能耗成本仅为国际上通用的液氮法的１／１０，整具工艺过程不产生二次污染，为废旧橡胶的综合利用提供了一条新途径。     

从醇后气中回收淡甲醇

在甲醇分离器后设置淡甲醇回收装置回收醇后收醇后的中甲醇，其回收率达到８７．５％，同时大大降低了排放地沟的稀氨水中的甲醇含量，减轻了稀氨水对环境的污染，有较好的经济效益和环境效益。     

从炼厂含油污泥中回收油及残渣无害化治理的研究

通过对某油田石化厂的含油污泥中回收油及其残渣无害化治理问题的研究，确定了用热洗加离心分离实现污油回收及残渣无害化。根据实验室数据，处理此种含油污泥可达到如下结果：油回收率９５％，残渣中油及主要污染物含量基本符合ＧＢ４２８－８４标准，工艺污水符合进入污水场的要求。采用此法，按照２ｔ／ｈ的处理量计算，预计设备投资４５．７万元。     

PROBLEMS OF REESTABLISHING COMMERCIAL RECREATION BUSINESSES IN NEW YORK FOLLOWING HURRICANE AGNES1

ABSTRACT: Forty-two commercial campgrounds and 34 commercial marinas were studied to determine the amount and types of flood-related damages incurred from Hurricane Agnes, and to evaluate the institutional measures available to help management overcome these losses. Economic losses incurred by firms due to inability to operate, and declines in the number of recreationists, were over twice the magnitude of losses suffered via direct physical damages from flooding. The Federal Flood Insurance Program, as presently constituted, is of very little use to firms having structural investments in and over water. Most firms were complimentary of the Small Business Administration's loan programs. It appears that active programs of communication and promotion are needed following restoration of regions involved in natural diasters to reestablish the tourist industry of those regions.     

Electronic waste recycling: A review of U.S. infrastructure and technology options

The useful life of consumer electronic devices is relatively short, and decreasing as a result of rapid changes in equipment features and capabilities. This creates a large waste stream of obsolete electronic equipment, electronic waste (e-waste).Even though there are conventional disposal methods for e-waste, these methods have disadvantages from both the economic and environmental viewpoints. As a result, new e-waste management options need to be considered, for example, recycling. But electronic recycling has a short history, so there is not yet a solid infrastructure in place.In this paper, the first half describes trends in the amount of e-waste, existing recycling programs, and collection methods. The second half describes various methods available to recover materials from e-waste. In particular, various recycling technologies for the glass, plastics, and metals found in e-waste are discussed. For glass, glass-to-glass recycling and glass-to-lead recycling technologies are presented. For plastics, chemical (feedstock) recycling, mechanical recycling, and thermal recycling methods are analyzed. Recovery processes for copper, lead, and precious metals such as silver, gold, platinum, and palladium are reviewed. These processes are described and compared on the basis of available technologies, resources, and material input–output systems.