Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

一次环境污染司法鉴定的测试与分析

受人民法院的委托,环境监测部门对一起汽车尾气致人死亡案件的现场进行大气污染物和空气质量的模拟测试。测试表明,在密闭的车库内,汽车外和汽车内CO浓度都会迅速增加,达到致人死亡的浓度,O2浓度迅速减少,最终使汽车发动机熄火。测试为司法部门提供案件审理现场空气质量数据,也提醒人们不要在密闭的车库内开启汽车空调取暖或纳凉休息。     

承德市室内环境质量污染现状调查与研究

对承德市160家宾馆、饭店、歌舞厅等公共场所,80个民用建筑工程项目,80余家个人家庭装修进行室内环境检测,发现不同场所室内主要超标污染物不同,新建公共场所主要超标污染物为挥发性有机物、甲醛;已建成的重点公共场所空气超标污染物主要为茵落总数和CO2;民用建筑工程超标污染物主要为氨、甲醛;个人家装超标污染物主要为总挥发性有机物,甲醛。     

基于快速聚类方法分析常州市区PM2.5的统计特性

运用统计方法研究常州市区2013~2014年6个国控点六项基本污染物(SO_2、NO_2、CO、O_3、PM_(2.5)和PM_(10))月平均浓度变化,结果表明,除O_3外,其它五项污染物月平均浓度夏季较低冬季较高.颗粒物与风速之间的关系为PM_(2.5)浓度随风速的升高一直降低,PM_(10)随风速的升高浓度先降低后升高.采用快速聚类分析(k-means)并运用SWV和DIV指数对六项基本污染物进行分类,得到4个样本分类.与依据颗粒物化学成分或粒径谱对PM进行源解析方法不同,本研究更多是从PM_(2.5)与其它污染物相关关系以及污染程度等角度按照欧式距离进行分类.不同类中PM_(2.5)来源明显不同,类1中PM_(2.5)与化石燃料燃烧排放密切相关,类2与O_3密切相关,类3与城市不完全燃烧排放、区域灰霾污染密切相关,类4可以归类于城市"背景"类.快速聚类分析结果也表明常州市区PM_(2.5)有着复杂的来源.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

内蒙古自治区机动车尾气污染监控体系初探

随着机动车大量开始进入普通家庭,内蒙古自治区机动车保有量快速增长,使得机动车排气污染已经成为城市大气污染的重要来源。因此,开展在用机动 车排气污染防治工作,建立切实有效的机动车排气污染监控体系刻不容缓。本文对内蒙古自治区在用机动车排气污染监控体系和保障好保障体系建设内容进行了初探。     

长三角地区秸秆燃烧排放因子与颗粒物成分谱研究

为获取长三角地区秸秆燃烧污染物排放因子及其颗粒物成分谱,利用自行设计开发的开放式燃烧源排放测试系统,选取小麦、水稻、油菜、豆秸和薪柴等5类典型作物秸秆,分别采用露天焚烧和炉灶燃烧2种燃烧方式,实测其气态污染物和颗粒物排放特征.结果表明,露天燃烧各类秸秆的CO、NOx和PM2.5平均排放因子约为28.7、1.2和2.65 g·kg-1,由于炉灶氧含量相对较低,燃烧不充分,其污染物排放因子总体高于露天燃烧,分别为81.9、2.1和8.5 g·kg-1.各类秸秆中,油菜的排放水平相对较高.含碳组分(OC和EC)是生物质秸秆燃烧产生PM2.5的主要组成,在露天燃烧中OC和EC的质量分数分别占(38.92±13.93)%和(5.66±1.54)%;炉灶燃烧中OC和EC分别为(26.37±10.14)%和(18.97±10.76)%.Cl-、K+等水溶性离子也有较大贡献,在露天燃烧中分别为(13.27±6.82)%和(12.41±3.02)%;在炉灶燃烧中分别为(16.25±9.34)%和(13.62±7.91)%.小麦、水稻、油菜和豆秸等作物秸秆露天燃烧排放颗粒物的K+/OC值分别为0.30、0.52、0.49和0.15,这些特征值可用于判断长三角区域空气质量受秸秆燃烧排放影响的程度,为大气污染来源解析提供直接的判断依据.     

激光烧蚀皮革过程中的废气成分研究

皮革在激光烧蚀过程中会产生大量具有恶臭气味的有机废气,严重影响空气质量。为了评估该类型气体危害,分别利用紫外可见分光光度计和气相色谱-质谱联用仪,检测了天然皮革和人造革在激光烧蚀过程中的废气成分。结果显示烧蚀天然皮革所产生的废气中含有NO、NO2、SO2、二氨基丙烷和丙烯酸甲酯,烧蚀人造革所产生的废气中含有NO、NO2、甲硫醇、二硫化碳、乙二醇、二甲基二硫醚、丙二醇、乙二醇二甲醚和硫代乙酸甲酯。其中,甲硫醇、二硫化碳、二甲基二硫醚和乙二醇二甲醚都是产生恶臭的有机成分。研究为该类型废气的治理提供了基础数据和依据。     

某大型钢结构项目喷涂废气污染防治措施可行性分析研究

钢结构建筑是一种新型的节能环保的建筑体系,大多数大型钢结构产品在生产过程中均需要进行抛丸除锈、喷涂处理,使用油漆进行喷涂过程中将不可避免地产生含TVOC(主要为甲苯、二甲苯和非甲烷总烃)的有机废气。大型钢构类生产项目喷涂废气的收集和处理尤为困难。文章结合某大型钢结构生产企业实际采取的喷涂废气治理方法进行喷涂废气污染防治可行性分析,旨在为同类项目喷涂废气污染治理及进一步改良涂装废气治理工艺和技术提供参考依据。     

模糊综合评判法在渭河水质评价中的应用研究

渭河是陕西省的第一大河流,准确的水质评价是治理渭河水体污染的重要前提。本文采用模糊变换原理和最大隶属度原则,运用模糊综合评判法对渭河潼关吊桥断面2012年的监测数据进行了全面评价。结果表明该断面春、夏、秋、冬四个季度的水质污染级别分别为:Ⅴ类(严重污染)、Ⅰ类(未污染)、Ⅳ类(重污染)和Ⅴ类(严重污染),主要污染物为NH3-N。与传统的单因子评价法相比,该方法能更全面合理地反映水质情况。