基于Tripod-Beta模型的船舶火灾事故风险分析

为深入分析船舶火灾事故风险因素及其后果产生的影响,通过分析1991-2017年全球船舶火灾事故调查报告,从人员、管理、船舶设备、货物、环境5个方面对船舶火灾影响因素进行识别研究;采用三脚架事故致因模型(Tripod-Beta model),构建考虑安全栅的船舶火灾事故情景演化模型,识别船舶火灾关键影响因素;并在样本量较少的情况下,采用信息扩散理论计算船舶火灾发生率;最后,利用布尔函数和风险矩阵,对船舶火灾事故风险进行评价研究。结果表明:船员不安全行为和船舶设备表面过热、设备短路是船舶火灾事故的关键风险因素;事故后果链中安全栅遭到破坏时,船舶火灾风险处于不希望发生范围内。该方法能有效评估船舶火灾风险的等级,满足海事管理部门的监管工作需求。     

遥感与GIS支持下的城市绿地信息提取方法研究--以深圳市为例

城市绿地作为城市结构中的自然生产力主体，在城市系统中起着重要作用。传统的城市绿地调查多采用人工普查并结合统计学方法进行城市绿地调查，需要投入大量的人力和资金，但得到的数据精度和现时性都较差，而采用高分辨率遥感卫星数据与地理信息系统相结合的方法，可以达到对城市绿地遥感数据的快速特征提取和准确的空间统计分析。文章采用基于遥感和GIS相结合的方法，并以深圳市为例，进行了城市绿地特征提取方法的研究和应用分析。     

广州市蔬菜地土壤重金属污染状况调查及评价

探讨了广州市蔬菜地土壤重金属污染状况,测定了95份土壤样品中铅、镉、铬、砷、汞的含量水平。土壤中铅、镉、铬、砷、汞的含量分别在6.44～153.10mg/kg、0-0.682mg/kg、5.82～101.60mg/kg、0.04～45.36mg/kg、0.01～O.32mg/kg之间。就污染的普遍性而言,铅污染最为普遍,其次是砷污染;就污染的程度而言,镉污染最严重.其次为砷、汞。对比今昔污染变化.广州市土壤污染治理已取得显著成效,但仍需努力。土壤中镉、砷、汞三种元素的变异系数,特别是镉的变异系数较大,这可能预示着点源性污染的存在。     

基于震后现场调查的震害损失评估软件

根据国家地震局的有关文件,研制了本软件。主要用于震后现场调查的地震灾害损失评估,也可根据抽样调查数据及背景资料对某地区地震灾害进行预估。本软件采用汉化的友好操作界面,使用方便。     

华东地区矿产资源调查新成果及工作建议

介绍了近年来华东地区资源调查评价的新成果。表明本地区仍具有较大的找矿潜力。并提出了华东地区下一阶段矿产资源调查工作的建议。建议分区域矿产调查、预查、普查三个工作层次。重点在武夷山铜铅锌成矿带、赣南钨多金属成矿区和皖赣相邻地区铜多金属成矿区(一带两区)。侧重铜、锡、钨、富铅锌等。     

广州李坑垃圾填埋场水环境污染调查

通过现场采样与历史资料统计，分析了广州市李坑垃圾填埋场垃圾渗滤液的水质特征，及其对地睛水和地表水的影响强度及范围，结果表明，该场对环境产生影响的主要污染物是以ＮＨ３－Ｎ、ＣＯＤＣｒ为代表的高浓度有机物、垃圾渗滤液对地下水的影响强度不大，对作为农业灌溉用水的地表水影响不超过２０００ｍ，对１０ｋｍ上的饮用水源不造成影响     

街道峡谷地面源污染物扩散规律的风洞试验研究

在风洞中１／２５０街道峡谷模型的底板内释放示踪气体，通过对浓度分布特征的观测，分析了街道峡谷 面湖泊污染物的扩散过程及其与街道建筑物结构，风向及排放源强度等因素之间的关系，探讨了中性边界层风洞模拟微尺度湍流扩散过程的相似准则与相似参数，为建立街道峡谷地面源污染物扩散模型提供了物理基础。     

腈纶粉尘对作业工人健康影响的调查

为探讨腈纶粉尘对作业工人健康的影响,对某腈纶厂毛条车间进行了劳动卫生学调查.该车间粉尘浓度为4.2(0.1～24)mg/m3,主要对接触人员上呼吸道和皮肤有刺激作用,同时导致肺通气功能受到明显损伤,部分工人胸部X线表现异常.提示车间环境中时间加权平均容许浓度超过2mg/m3、短时间接触容许浓度超过4mg/m3尘的卫生标准不能充分保护工人健康.     

Investigation of the complexation of metal-ions by strong ligands in fresh and marine water

SCOPE: The detection and investigation of metal ions bound in strong complexes in natural waters is a difficult task, due to low concentration of the metal ions themselves, and also of the strong ligands, which, moreover, are often not of a well-defined composition. Here, a method is proposed for the investigation of the speciation of metal ions in natural waters. OBJECTIVE AND METHOD: It is based on the sorption of metal ions on strongly sorbing ion exchange resins, i.e. complexing resins. For this reason the method is called Resin Titration. It has been shown in previous investigations that the concentration of metal ion totally sorbed by a particular resin, and its reaction coefficient in the solution phase in the presence of the resin, can be determined from the sorption data using a simple relationship. Here, a data treatment (the Ruzic linearization method) is proposed for also determining the concentration of the ligands responsible for the complex in equilibrium with the resin. RESULTS: The method was applied to data obtained by Resin Titration of a freshwater and a seawater. Copper(II) and aluminium(III) were considered, using Chelex 100 as a titrant, due to its strong sorbing properties towards these metal ions. The results were: the total metal concentration in equilibrium with the resin, the side reaction coefficients, and the concentration of ligands. In all these cases the ligands forming very strong complexes were found to be at concentration lower than that of the metals. CONCLUSION: The Ruzic linearization method allows the determination of the concentration of the ligands forming very strong complexes in equilibrium with Chelex 100. The reaction coefficient was better determined by the calculation method previously proposed for RT. The ligands responsible for the strong complexes were found to be at low concentration, often lower than that of the metal ions considered. The metal in the original sample is partly bound to these ligands, since the complexes are very strong. Only a part of the metal is linked to weaker ligands, or free.     

生物膜填料塔净化低浓度苯乙烯废气的实验研究

研究了进口气体中苯乙烯浓度、气体流量和液体流量等3个因素对生物膜填料塔净化苯乙烯废气的影响。研究结果表明，当进口气体中苯乙烯浓度为1000mg／m^3以下、气体流量为200L／h、循环液流量为10L／h的操作条件下，废气中苯乙烯的去除率可达90％以上。