Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

基于GIS和RS的市域尺度下的植被NPP研究

在GIS和RS支持下,利用土地利用类型数据、地面气象数据和遥感影像数据,以青岛市为例,研究了市域尺度下的植被NPP空间分布特征.结果表明:青岛市NPP值为0~288 g·m-2·a-2,林地NPP值较高,耕地次之,建成区等区域最小.在小尺度区域内,NPP分布受土地利用类型影响较大,受气象因素影响较小.NPP模块在数据获取上比较容易,仅利用土地利用类型数据、地面气象数据和遥感数据就可以对陆地植被NPP进行计算,实际应用可操作性强.30 m分辨率植被NPP计算值更适宜于在市级小尺度区域内应用.     

厌氧-准好氧联合型生物反应器填埋场产气规律的研究

通过将厌氧型生物反应器填埋场（ANBL）和准好氧矿化垃圾生物反应床（SAARB）串联,组成新型的厌氧-准好氧联合型生物反应器填埋场（AN-SABL）,研究其产气速率、产气量以及产气组分的变化规律,以期为填埋气体的收集、利用和处理提供理论依据.实验表明,AN-SABL中的厌氧填埋单元的产气受到了抑制,其中ANBL2号单元和ANBL3号单元的产气率分别为49 L.kg-1和39 L.kg-1,仅占ANBL1号的94.2%和75.0%,但提高回灌频率,能促进厌氧填埋单元的产气,其甲烷含量最大值可达到62.67%;ANBL夏季产气速率和产气量明显高于冬季,并以12 h为周期交替出现产气高峰;此外,AN-SABL能够促进其厌氧单元的硝化和反硝化作用,N2O的含量受季节和填埋场类型影响显著,其变化范围在0.001 7%～4.017 9%之间.ANBL的累积产气量在初始调整阶段呈对数增长,过渡酸化阶段呈线性增长,酸化产甲烷阶段呈指数增长.     

杭州市典型企业废水中挥发性有机物排放特征及其评价

以10家杭州市典型企业进出口废水为调查对象,用顶空气相色谱质谱法测定77种挥发性有机物(VOCs),分析其排放特征,并对监测结果进行评价.结果表明,进口废水共定量检出22种VOCs,检出质量浓度范围为7~3.39×106μg·L-1;出口废水共定量检出14种VOCs,检出质量浓度范围为16~6.82×104μg·L-1.就行业而言,香精香料制造企业进出口废水VOCs检出的质量浓度最高.以《污水综合排放标准》(GB 8978-1996)三级排放标准为评价标准时,1号企业出口废水检出甲苯质量浓度为2.45×103μg·L-1,超过标准限值.以挥发性有机物的水介质排放环境目标值(DMEG WH)为标准时,3号企业出口废水检出的正丁醇、异丙醇、丙酮质量浓度均超过它们各自的水介质排放环境目标值.     

正常污泥和膨胀污泥中EPS膜污染特性及其与膜表面作用能分析

胞外聚合物(Extracellular polymeric substance,EPS)是导致膜污染的重要物质,且不同形态污泥的EPS具有不同的性质,研究正常污泥和膨胀污泥的EPS膜污染特性具有重要意义.因此,实验考察了正常污泥和膨胀污泥的膜污染速率.结果表明,膨胀污泥膜污染速率远高于正常污泥,膨胀污泥EPS(Bulking sludge-EPS,BS-EPS)浓度((172.9±10.4) mg·g-1)明显高于正常污泥EPS(Normal sludge-EPS,NS-EPS)浓度((95.9±6 6) mg·g-1),且膨胀污泥的蛋白质/多糖(Protein/Carbohydrate,P/C)值(2.26)高于正常污泥的P/C值(1 97)此外,通过序批式吸附实验研究了正常污泥和膨胀污泥的EPS膜污染差异,并基于Derjaguine-Landaue-Verweye-Overbeek (XDLVO)理论计算了EPS与PVDF膜表面之间的作用能结果表明,EPS-膜系统的总界面能为负值,即EPS-膜系统之间会发生自吸附行为,而膜与BS-EPS的总界面能(-63.943mJ.m2)较膜与NS-EPS(-56.366 mJ·m2)具有较高的能量,因此,BS-EPS与膜的吸附力较强;NS-EPS和BS-EPS主要能量壁垒分别为8.89 kT和7.51 kT,表明NS-EPS与膜之间的排斥力更强,因而BS-EPS更容易造成膜污染     

生活垃圾填埋过程含水率变化研究

为分析垃圾在好氧和厌氧条件下降解过程中含水率变化的规律,采用时域反射测量(time domain reflectometry,TDR)技术监测了垃圾填埋过程中含水率的变化情况.结果表明,填埋过程中垃圾体积含水率随时间逐渐增大,垃圾持水性能不断提高.好氧初期垃圾内水量变化与含水率变化正相关,好氧后期则为负相关;厌氧填埋过程中,垃圾沉降压缩是含水率变化的主要原因.垃圾TDR读数与基于物质衡算的垃圾体积含水率计算值之间有较好的相关性,好氧填埋过程两者最大偏差约为±5%,厌氧填埋过程两者最大偏差约为±2%,TDR技术适用于实际填埋工程的含水率测量.     

氨对垃圾焚烧飞灰浸出特性的影响及地球化学模拟

垃圾焚烧飞灰可能因为选择性非催化还原法(SNCR)脱硝过程中氨泄漏、垃圾携带的渗滤液受热挥发等原因而吸附氨.本研究中采用人为添加氨水,在pH为3.66～12.44范围内,研究氨对飞灰中溶解性有机碳(DOC)和重金属浸出的影响,并利用地球化学模拟软件Visual MINTEQ从金属化学形态分布上分析氨对飞灰浸出的影响机制.结果表明,DOC在pH>9和有高浓度氨(≥1 357 mg·L-1)存在时,其浸出量大幅增加,而在浸出液中氨的水平不高于537 mg·L-1时则受氨的影响很小;在pH<6时,飞灰中各金属主要以自由态的金属离子和金属-氯络离子形态大量溶出,且受氨的影响较小;而在pH为8～12的碱性环境中和氨浓度较高时(≥3 253 mg·L-1),氨与金属生成了可溶性的金属-氨配合物,能显著增加Cd、Cu、Ni、Zn的浸出,且在pH=9附近时浸出量达到最大值,但氨对Al和Pb的浸出影响甚微;在pH>12时,Cd、Cu、Ni、Zn主要以羟基金属离子形式存在.在氨浓度为3 253 mg·L-1时,通过利用Visual MINTEQ模拟浸出值与试验数据的对比,发现Al、Pb、Zn的浸出主要由溶解/沉淀模型控制,而Cd、Cu、Ni由溶解/沉淀模型和表面吸附反应模型同时控制,且Visual MINTEQ模型能较好地预测飞灰中Al、Cu、Pb、Zn的浸出特性.     

Ethyl thiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions

This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals.     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.