响应曲面法优化复合絮凝剂的制备工艺

为了提高染料废水中COD和色度的去除效果,采用响应曲面法对聚硅酸类新型复合絮凝剂的制备工艺进行了优化实验研究。在单因素实验基础上采用Box-Behnken Design(BBD)实验设计方法,设计出了影响染料废水处理效果的3因素3水平共15组实验,其中n(Fe+Al):n(Si)的摩尔比为4～6,n(B+Mg):n(Si)的摩尔比为0.3～0.7,熟化时间为1～3 d。根据15组实验结果,以COD去除率和色度去除率为响应值分别建立了二次多项式响应曲面模型。模型优化结果显示,在n(Fe+Al):n(Si)摩尔比为5∶1,n(B+Mg):n(Si)为0.5∶1,熟化时间为2 d的条件下,制备得到的新型复合絮凝剂聚硅酸铝铁硼镁具有最佳的絮凝处理性能和脱色效果,能有效去除染料废水中的COD和色度,其中出水色度接近于0,COD的去除率达到87.65%,模型验证实验进一步验证了本文所建立的响应曲面法在复合絮凝剂制备工艺优化中的有效性。     

基于冷阴极触发管振动试验夹具的设计

介绍了一种基于冷阴极触发管性能检测及振动试验所需的夹具,从夹具材料的选取、结构设计和刚度要求进行了设计,分析了该夹具在制造过程中存在的关键问题及解决方法,并在振动试验中加以验证。     

产品的振动冲击响应设计

在抗振缓冲设计中,人们通常按标准、合同中的要求进行设计,本文认为要按产品受振动与冲击后的响应进行设计,及如何按振动与冲击后的响应进行设计。     

矿区生态环境遥感监测数据库系统设计与实现

以肥城矿区为背景,基于Personal Geodatabase模型构建了空间数据库,采用C#作为开发语言,借助ArcGIS Engine的控件开发了矿区生态环境遥感监测数据库系统.根据数据获取方式不同,将空间数据库分为基础地理数据库、专题数据库、实地监测数据库和表格数据库4部分,系统实现了矿区空间数据和属性数据的统一存储和管理,多时相遥感数据的对比分析,水质、土壤湿度的动态监测,矿区各类地物面积的统计分析等功能.     

木屑处置漏油事故的室内模拟

用锯木屑作为吸附材料,0#柴油为吸附对象进行室内模拟实验,研究了木屑对纯油、水中浮油的吸附以及吸油后的木屑在水中的漂浮性能;并以木屑粒径、木屑投加量、振荡频率、油膜厚度为研究指标,设计了5因素4水平的正交实验,考察了各因素对0#柴油的吸附量、去除率以及木屑漂浮率的影响并对优化条件进行了讨论。结果表明,在实验研究范围内,木屑对水中柴油的吸附速度极快,1min即可达到饱和,饱和吸附量为8．08g／g;木屑在水中漂浮性能良好,静态时经72h漂浮,漂浮率维持在92％左右;振荡频率为150r／min时,72h内漂浮率维持在68％以上;最佳吸油条件组合为吸附剂粒径10～20目,振荡频率120r／min,木屑投加量0．7g,油膜厚度1．65mm。     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

固定化斜生栅藻净化畜禽废水中氨氮和磷的影响因素

为探讨Cu2+、p H和流速对固定化斜生栅藻去除畜禽废水中NH+4-N、TP效果的影响,在实验室条件下模拟实际污水处理过程,并采用正交实验方案对结果进行分析。结果表明低质量浓度Cu2+(0~0.05 mg/L)改善藻的净化效果,高质量浓度Cu2+(0.50~5.00 mg/L)抑制藻的净化效果;在p H较高的条件下(p H=9),固定化斜生栅藻的净化效果明显提高;流速对结果没有明显影响。通过正交实验,得出固定化斜生栅藻去除畜禽废水中NH+4-N、TP的优化条件如下:Cu2+质量浓度为0.05 mg/L,p H为9,流速为0.3 m/s。此时NH+4-N去除率为96.11%,TP去除率为97.53%。     

面向突发性水污染事件的三维可视化系统

针对突发性水污染事件的突发性、复杂性与潜在的次生衍生危害等特点,设计并开发了面向突发性水污染事件的三维可视化系统。对建设三维可视化系统的需求进行了分析,提出了系统的四层体系结构,基于三维地理信息系统World Wind组件,采用三维可视化环境建模、海量数据缓存机制以及基础地理信息集成等信息技术,开发了系统的基本应用与高级应用,将系统应用到2005年发生在松花江流域的突发性水污染事件中。实例表明:所设计的三维可视化系统具有集成性、可扩展性和较好三维表现力等特点,支持海量数据与复杂应用的集成与三维展示,为突发性水污染事件的空间模拟和决策支持提供支撑。     

台风灾害债券设计——基于广东省数据的实证研究

台风作为全球发生频率最高,影响最严重的一种自然灾害,对我国的影响也非常严重。在巨灾风险证券化、巨灾债券已成为巨灾保险业大趋势的背景下,发展我国台风灾害债券具有重要的现实意义。以我国受台风灾害影响最严重的省份——广东省为研究对象,收集了其近30年相关台风损失数据,利用非寿险精算技术分析其台风的损失分布和次数分布,在此基础上利用CAMP模型和现金流分析对广东省的台风灾害债券做了初步设计。