DESIGN AND IMPACT ANALYSIS FOR DIVERSION AT COAL CREEK MINE1

A diversion system has been designed to carry the flow from East Fork of Coal Creek around the area proposed for mining at Thunder Basin Coal Company's (TBCC) Coal Creek mine in Campbell County, Wyoming. This paper describes the field and analysis procedures necessary to prepare the diversion design and impact evaluation, and the innovative concepts developed for the diversion system design to minimize impacts on downstream channel stability. Under the proposed diversion system design, water from the East Basin of Coal Creek will be diverted at two locations. At one location, flow will be impounded by a small dam and decanted by a pump through a pipeline into East Fork at the location of the second diversion. At this location, a training dike will be placed across the stream channel to divert flows into a diversion channel. Gravity flow along the diversion channel will deliver water to a playa area which will be converted into a detention basin by placing a small dam across its southern end. Flows up to the magnitude of the 24-hour 2-year peak flow will be passed directly through the detention basin into Middle Fork with negligible attenuation of flow rates. For less frequent events, water will be stored in the detention basin in order to prevent velocities in Lower Middle Fork from exceeding the maximum permissible velocity above which scouring may occur. Evaporation and seepage losses from the diversion system were estimated to be small and should be more than offset by the addition of water from the playa drainage basin into the Coal Creek drainage. Velocities predicted for the Lower Middle Fork after-the diversion is constructed are expected to be low enough that significant erosion of the channel is not expected to occur.     

WATER CONSERVATION METHODS IN URBAN LANDSCAPE IRRIGATION: AN EXPLORATORY OVERVIEW1

ABSTRACT: The increasing use of irrigation for urban landscapes is causing new demands for efficient watering systems. Conservation techniques for irrigated agricultural fields cannot be applied to urban landscapes without amendment. This paper attempts to review methods of urban landscape water conservation in the context of the diversity and complexity of urban landscapes and the demands upon them for quality of the urban environment. A development's initial site layout and planting design fundamentally determine how much irrigation water will be required; the complexity and creativity inherent in urban design open a number of specific possibilities for reducing water demand. Irrigation hardware is then designed to deliver the required volume of water to the specified landscape efficiently by implementing a number of physical and operational principles. Maintenance of the finished development involves monitoring results and making adjustments as the plantings grow and develop. The potential for conserving urban irrigation water is large. Effective conservation need not compromise other qualities of the urban environment such as aesthetics, screening, or shade. Urban design can address both the kinds of landscapes people need, and minimal consumption of irrigation water.     

REGIONAL RAINFALL INTENSITY-DURATION-FREQUENCY CURVES FOR PENNSYLVANIA1

ABSTRACT: A statistical analysis of all available continuous hourly and 15-minute duration rainfall records for Pennsylvania was performed to develop an updated procedure to estimate design storms. As a resuit of this study, Pennsylvania was divided into five homogeneous rainfall regions and a set of rainfall intensity-duration curves developed for each region, for return periods of 1 to 100 years and durations ranging from 5 minutes to 24 hours. The PDT-IDF curves were judged to be a better representation of Pennsylvania rainfall than the nationwide TP-40 maps, particularly for storm events of 10-years and lower return periods. The average time distribution of 24-hour storms in Pennsylvania was found to be well represented by the SCS Type II distribution. The Corps of Engineers SPS 24-hour distribution was found to differ appreciably from both the SCS Type H and the Pennsylvania 24-hour storm distribution. For storm durations between 15 and 90 minutes the standard Yarnell intensity-duration curves closely resemble Pennsylvania storm distributions.     

PROBABLE MAXIMUM FLOOD ESTIMATION-EASTERN UNITED STATES1

In 1982, the National Weather Service (NWS) published criteria for developing the spatial and temporal precipitation distribution characteristics of Probable Maximum Storms. The criteria, which are intended for use in the United States east of the 105th meridian, involve four variables: (1) location of the storm center, (2) storm-area size, (3) storm orientation, and (4) temporal arrangement of precipitation amounts. A computer program has been developed which applies the NWS criteria to produce hyetographs of spatially-averaged precipitation for a basin, or for each subbasin if the basin is subdividided. The basis and operational characteristics of the program are described, and an application is illustrated in which the program is used in conjunction with a precipitation-runoff simulation program (HEC-1) to compute a Probable Maximum Flood.     

WATER DEMAND AT WESTERN U.S. RECREATION DEVELOPMENTS1

Although the volume of potable water used at recreation developments is minor relative to total regional water use, very high quality is required and the source is often of limited capacity, such as a mountain spring or small local aquifer. Frequent confrontations between developers and regulatory agencies result from claims by developers that water demand will be very small while regulators tend to treat such developments the same as municipal residence. Almost no published data base exists for resolving such conflicts. Included here are: 1) Water use measurements of various peak period durations (seasonal, monthly, daily, and instantaneous) at several types of recreational developments in Utah and Wyoming (mountain cabins, both ski- and water-based condominiums, and recreation vehicle campgrounds), 2) statistical (frequency) analysis of the data and a comparison with municipal demands in the same region, and 3) analysis of occupancy rates at the various categories of developments.     

A terrain-based paired-site sampling design to assess biodiversity losses from eastern hemlock decline

Biodiversity surveys are often hampered by the inability tocontrol extraneous sources of variability introduced intocomparisons of populations across a heterogenous landscape. If not specifically accounted for a priori, this noisecan weaken comparisons between sites, and can make itdifficult to draw inferences about specific ecologicalprocesses. We developed a terrain-based, paired-sitesampling design to analyze differences in aquaticbiodiversity between streams draining eastern hemlock (Tsuga canadensis) forests, and those draining mixedhardwood forests in Delaware Water Gap National RecreationArea (USA). The goal of this design was to minimize variancedue to terrain influences on stream communities, whilerepresenting the range of hemlock dominated streamenvironments present in the park. We used geographicinformation systems (GIS) and cluster analysis to define andpartition hemlock dominated streams into terrain types basedon topographic variables and stream order. We computedsimilarity of forest stands within terrain types and usedthis information to pair hemlock-dominated streams withhardwood counterparts prior to sampling. We evaluated theeffectiveness of the design through power analysis and foundthat power to detect differences in aquatic invertebratetaxa richness was highest when sites were paired and terraintype was included as a factor in the analysis. Precision ofthe estimated difference in mean richness was nearly doubledusing the terrain-based, paired site design in comparison toother evaluated designs. Use of this method allowed us tosample stream communities representative of park-wide forestconditions while effectively controlling for landscapevariability.     

Environmental design implementation in Taiwan's industries

This study investigated Taiwan's industries to identify the characteristics of companies most advanced in environmental design. Thirty design principles in five categories were used to define advanced environmental design. The five categories are: use of raw materials, use of energy, design for recyclability, product life cycle assessment, and packaging optimization. We found that of the 30 design principles only eight were applied consistently by Taiwanese manufacturers. Most effort was given to the “use of energy” category. The most advanced environmental design was found at large companies—those with over 2000 employees, 3 billion in capital, and/or 3 billion in annual sales.     

山阳中学滑坡稳定分析及治理方案的优选

山阳中学滑坡位于陕西省山阳县城以东2.5km处,自1984年以来,出现多次局部滑动现象.本文在分析该滑坡基本特征的基础上提出了滑坡治理方案,通过对三种方案在造价、环境影响、施工难度和未来发展的要求等方面的比较,提出了推荐方案.     

论整治工程与滑坡地质体的密切结合

滑坡结构体特征是其治理方案论证的基本依据,只有紧密结合滑坡结构特征进行工程设计,才能充分发挥地质体的自稳能力,才能通过设防关键位置、关键滑坡块等来稳定整个坡体.从查明滑坡地质体特征出发,阐明了在滑坡治理中如何依据滑坡性质和主控因素确定滑坡整治方案,如何依据滑动面特征确定整治工程类型;进而讨论了滑坡设防工程的最佳位置和关键滑动面,指出整治工程与滑坡地质勘察相结合是实现滑坡防治优化设计、提高防治效果的重要环节.     

抗震性能设计的发展

现行建筑抗震设计规范是以保证人的生命安全为基本目标进行抗震设防的,即在小震和中等强度地震作用下控制结构的损伤发展,而在罕遇地震作用下防止结构倒塌.然而,据此设计的建筑由地震所造成的使用功能丧失而震后恢复重建所需费用或所花费的时间可能大大超过社会和业主所能承受的限度.因此,未来建筑在多级水准设防地震下的设计需达到多级性能水准已形成共识.基于性能的抗震设计将发展形成未来抗震设计规范.综述了基于性能的抗震设计的最新发展状况,提出了它存在的问题及进一步发展的趋势.