Genotypic Differences in Effects of Cadmium Exposure on Plant Growth and Contents of Cadmium and Elements in 14 Cultivars of Bai Cai

Abstract

Fourteen cultivars of bai cai (Brassica campestris L. ssp. chinensis var. communis) were grown in the nutrient solutions containing 0–0.5 μg mL^?1 of cadmium (Cd) to investigate genotypic differences in the effects of Cd exposure on the plant growth and uptake and distribution of Cd in bai cai plants. The Cd exposure significantly reduced the dry and fresh weights of roots and shoots, the dry weight ratio of shoot/root (S/R), total biomass, and chlorophyll content (SPAD value). Cd concentrations in bai cai ranged from 13.3 to 74.9 μg g^?1 DW in shoots and from 163.1 to 574.7 μg g^?1 DW in roots under Cd exposure, respectively. The considerable genotypic differences of Cd concentrations and accumulations in both shoots and roots were observed among 14 bai cai cultivars. Moreover, Cd mainly accumulated in the roots. Cd also caused the changes of uptake and distribution of nutrients in bai cai and under the influence of cadmium, the concentration of potassium (K) decreased in shoot and increased in root. However, the concentrations of magnesium (Mg), phosphorus (P), manganese (Mn), boron (B), and iron (Fe) increased in shoots and decreased in roots. In addition, Cd exposure resulted in an increase in calcium (Ca), sulphur (S), and zinc (Zn) concentrations in both shoots and roots but had no significant effects on the whole uptake of the examined mineral nutrients except for S.     

A hybrid method for quasi-three-dimensional slope stability analysis in a municipal solid waste landfill

Limited space for accommodating the ever increasing mounds of municipal solid waste (MSW) demands the capacity of MSW landfill be maximized by building landfills to greater heights with steeper slopes. This situation has raised concerns regarding the stability of high MSW landfills. A hybrid method for quasi-three-dimensional slope stability analysis based on the finite element stress analysis was applied in a case study at a MSW landfill in north-east Spain. Potential slides can be assumed to be located within the waste mass due to the lack of weak foundation soils and geosynthetic membranes at the landfill base. The only triggering factor of deep-seated slope failure is the higher leachate level and the relatively high and steep slope in the front. The valley-shaped geometry and layered construction procedure at the site make three-dimensional slope stability analyses necessary for this landfill. In the finite element stress analysis, variations of leachate level during construction and continuous settlement of the landfill were taken into account. The "equivalent" three-dimensional factor of safety (FoS) was computed from the individual result of the two-dimensional analysis for a series of evenly spaced cross sections within the potential sliding body. Results indicate that the hybrid method for quasi-three-dimensional slope stability analysis adopted in this paper is capable of locating roughly the spatial position of the potential sliding mass. This easy to manipulate method can serve as an engineering tool in the preliminary estimate of the FoS as well as the approximate position and extent of the potential sliding mass. The result that FoS obtained from three-dimensional analysis increases as much as 50% compared to that from two-dimensional analysis implies the significance of the three-dimensional effect for this study-case. Influences of shear parameters, time elapse after landfill closure, leachate level as well as unit weight of waste on FoS were also investigated in this paper. These sensitivity analyses serve as the guidelines of construction practices and operating procedures for the MSW landfill under study.     

烟囱与吸收塔合一结构分析

通过手工计算和ANSYS有限元软件计算两种方法对安徽新源热电有限公司烟囱与吸收塔合一结构进行结构计算。分析了结构在风载荷、地震载荷作用下的应力和变形,比较了手工计算和有限元电算结果,可为类似工程的计算提供理论参考。     

西南山区某气井井场地基稳定性模拟分析

中国西南山区蕴藏着丰富的天然气资源,但随着开发规模的日益扩大,天然气井逐步转向山区这类地质环境恶劣的地区。本文以西南山区某气井为原型,在详细阐明井场区地质环境背景特征的基础上,首先对井场出现的典型地质问题——地下采空区进行定性判断和分析;之后选用F lac-2D有限差分软件,对井场加载前/后地下采空区可能造成的井场地基应力和变形特征,采用双洞和采空区这2种计算模型,进行数值模拟分析。模拟结果表明,井场加载前/后地基最大位移量为2 mm,地基局部地段出现拉应力区,但总体上地基稳定。研究结论将为后期建设中井场建筑物的优化布局及基础的选型提供依据。     

某军机整体壁板裂纹损伤强度评估研究

用全机有限元模型模拟损伤部位的局部位移和力边界条件,对机翼整体壁板高应力区的裂纹型损伤分析,研究了不同损伤尺寸对整体壁板强度的影响,给出损伤尺寸与残余过载、残余强度系数的关系,结论对外场评定战伤飞机损伤程度提供依据.     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

MODEL FOR PREDICTING TRANSPORT OF PESTICIDES AND THEIR METABOLITES IN THE UNSATURATED ZONE1

ABSTRACT: A finite element model based on Galerkin's upstream weighted residual technique was developed to predict the simultaneous convective-dispersion transport and transformations of pesticides and their metabolites in the unsaturated zone. Transformations of the parent compound and its metabolites were assumed to be first-order reactions for oxidation and hydrolysis, while adsorption of the pesticide species (parent compound and metabolites) to the soil components was assumed to be represented by a linear equilibrium (Freundlich type) isotherm. Volatilization and plant root uptake of pesticides in the solution phase were neglected in the analysis. The proposed model was used to simulate the transport and transformation of aldicarb and its metabolites, aldicarb sulfoxide and aldicarb sulfone, in the soil profile. Several examples are used to demonstrate the accuracy, validity, and applicability of the proposed model. Simulated results indicate that the proposed model can potentially be used to estimate the mass flux of water, and pesticide and pesticide metabolite concentrations in the subsurface environment. However, further verification of the model against actual field data is needed to fully demonstrate the model's potential.     

黄土滑坡稳定性评价的反演分析

本文根据黄土滑坡的变形监测结果，同时考虑了边坡的初期应变分布状况，通过有限元反分析法，反推出边坡地基的力学参数，为黄土滑坡的稳定性评价和预报提供了可靠的依据。     

NUMERICAL MODELING OF SALTWATER INTRUSION IN THE NORTHERN GUAM LENS1

ABSTRACT This paper deals with the application of a two-dimensional, saltwater intrusion model to the aquifer in Northern Guam. The model used finite element theory and the Galerkin, weighted-residual technique as its basis. The Northern Guam lens was discretized into 299 linear, triangular elements and 189 nodes. The model was calibrated using 1978 hydrologic data. The output of the model was compared with measured water levels in six observation wells. The calibrated values of permeability and porosity were then used to verify the model using 1979 data. A calibrated and verified model can be used to make an infinite variety of management and planning studies. In this study, three applications are provided that would be considered typical management runs. Steady state runs were made to compare the four conditions of no pumping, 1978 pumping levels, twice 1978 pumping levels, and five times 1978 pumping levels. The water levels due to these conditions are shown in plan and in cross sections of the aquifer. The effect of zero recharge to the aquifer is next demonstrated for the pumping levels existing during 1978. The final run shows how long the aquifer takes to reach steady state when the pumping rate is increased from the 1978 pumping level to twice that value. The program can be used for numerous other studies for management and planning purposes.     

EFFECTS OF TIME STEP SIZE IN IMPLICIT DYNAMIC ROUTING1

ABSTRACT The effects of the size of the Δt time step used in the integration of the implicit difference equations of unsteady open-channel flow are determined for numerous typical hydrographs with durations in the order of days or even weeks. Truncation errors related to the size of the Δt time step cause a numerical distortion (dispersion and attenuation) of the computed transient. The magnitude of the distortion is related directly to the size of the time step, the length of channel reach, and the channel resistance and inversely to the time of rise of the hydrograph. The type of finite difference expression which replaces spatial derivatives and non-derivative terms in the partial differential equations of unsteady flow has an important influence on the magnitude of the numerical distortion, as well as the numerical stability of the implicit difference equations. Time step sizes in the range of 3 to 6 hrs generally tend to minimize the combination of required computation time and numerical distortion of transients having a time of rise of the order of several days.