含泥钾矿浮选分离技术研究

从钾矿性质和浮选技术2个方面对盐湖含泥钾矿进行资源化利用研究,首先运用X射线荧光光谱、X射线衍射和扫描电镜对含泥钾矿的矿泥化学组成及其结构特征进行了分析,其次选用盐酸十八胺和煤油为浮选药剂,对浮选法脱除钾矿中泥进行了研究.结果表明,盐湖矿泥中70%以上为以长石、粘土和粉砂等为主的硅铝酸盐;矿泥多充填包裹于盐类矿物粒晶间...     

基于底泥再悬浮试验的太湖水质模拟

为探索浅水湖泊水动力扰动作用对底泥再悬浮影响的规律,在室内矩形水槽内模拟了各种水动力条件下太湖底泥的起动规律,得到了太湖底泥在3种不同起动标准下的起动流速,通过考察上覆水中悬浮物浓度的变化,建立了底泥沉积物再悬浮通量与水体流速的定量化关系。结果表明:太湖底泥在个别动、少量动、普遍动3种标准下的起动流速分别为15、30和40 cm/s,且底泥沉积物再悬浮通量与流速呈现线性正相关关系,再悬浮通量随流速增大而增大,且相关性较好。将该试验结果应用于太湖的水量水质数学模型中,并和太湖实测资料进行了对比,取得了比较满意的效果。该模拟装置能够在室内可控条件下较好地反映太湖沉积物再悬浮特征,对太湖的富营养化治理具有重要意义。     

混凝-气浮-加压曝气工艺处理屠宰废水

高浓度生猪屠宰废水属难治理工业废水.采用混凝-气浮-加压曝气工艺处理屠宰废水,经生产实践证明,出水水质可达到<肉类加工工业水污染物排放标准>(GB13457-92)中的一级标准.     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

The boiling liquid expanding vapour explosion

The boiling liquid expanding vapour explosion (BLEVE) has existed for a long time and for most of this time it has been cloaked in mystery. Several theories have been put forward to explain this very energetic event but none have been proven. This paper describes a series of tests that have recently been conducted to study this phenomenon.

The study involved ASME code automotive propane tanks with nominal capacities of 400 litres. The tanks were exposed to a combination of pool and/or torch fires. These fire conditions led to thermal ruptures, and in some cases these ruptures resulted in BLEVEs. The variables in the tests were the pressure-relief valve setting, the tank wall thickness, and the fire condition.

In total, 30 tests have been conducted, of which 22 resulted in thermal ruptures. Of those tanks that ruptured, 11 resulted in what we call BLEVEs. In this paper, we have defined a BLEVE as the explosive release of expanding vapour and boiling liquid following a catastrophic tank failure. Non-BLEVEs involved tanks that ruptured but which only resulted in a prolonged jet release.

The objective of this study was to investigate why certain tank ruptures lead to a BLEVE rather than a more benign jet-type release. Data are presented to show how wall temperature, wall thickness, liquid temperature and fill level contribute to the BLEVE process.     

CAF涡凹气浮处理含油废水的中试试验研究

针对石化公司污水成分复杂,COD和油含量较高,还含有较多的硫化物、挥发酚和氨氮(NH3-N)等情况,选用一种新型的气浮设备CAF涡凹气浮系统对该含油废水进行了预处理中试试验。试验结果表明CAF处理石化含油废水效果明显,气浮处理效果好,出水油在10 mg/L以下,去除率高达95%,且CAF气浮的电耗小、占地面积小、操作管理和维修非常简便。采用CAF设备,占地面积可节省70%～80%,每年可节约电费50～60万元(按1000 m3/h,0.8元/kW·h),操作使用也极其简单,具有可观的经济效益。     

石脑油罐硫铁化合物自燃原因分析

对一起石脑油罐硫化铁化合物自燃事故的经过和原因进行了分析 ,推断出发生在石脑油罐硫铁化合物自燃并非为FeS自燃 ,并提出了预防同类事故的防范措施。     

池火灾热辐射下的最小安全距离

防火间距是石油化工企业平面设计中的一个重要参数 ,笔者旨在从流体力学角度研究池火灾发生情况下邻罐之间最小安全距离 ,从而给防火间距的制定提供依据。辐射是储罐区池火灾的主要传热方式 ,作者对池火灾形状以及介质辐射吸收性质进行了适当的简化 ,用CFD软件Fluent对丙烷液化烃储罐池火灾热辐射进行了数值模拟。模拟结果表明对于锰钢材料、内径为 1 2 4 1 0mm液化烃压力储罐 ,稳态池火灾情况下 ,相邻两储罐之间的最小安全距离为 1 5m。     

基于BP神经网络的苯储罐泄漏事故风险评价模型研究

为了在事故发生之前对苯储罐进行风险评价，提出1种基于BP神经网络的泄漏事故风险评价方法，利用该方法构建了苯储罐的风险评价模型，并对模型进行了训练及验证。研究结果表明:BP神经网络成功完成了建模任务，且模型训练结果较好，可利用基于BP神经网络所构建的苯泄漏事故风险评价模型对苯储罐发生泄漏事故的风险进行评价。     

火灾中液化气储罐热响应CFD模拟的UDF程序设计

为了降低火灾环境下储罐内部介质热响应及储罐失效试验研究的成本和风险,更好地为储罐事故的预测预防提供模拟依据,利用Fluent 12.0软件对密闭容器内部介质的传热传质过程进行模拟,给出了内部介质在受热和冷却条件下相变的控制方程;通过考虑内部介质气化热随温度的变化及饱和温度与区域单元压力之间的关系,编写了内部介质在受热和冷却条件下质量和能量源项的用户自定义函数(UDF);通过对部分参数进行简化,分别给出了喷射火和池火条件下丙烷储罐热响应模拟的结果,并与试验结果进行了对比.结果表明:储罐热响应各主要参数(内部介质温度、壁面温度,储罐内部压力)的误差在喷射火条件下低于15％,在池火条件下低于12.4％.这表明模拟所需源项UDF正确,可以用于现实储罐热响应的模拟.