我国建设内陆核电站对环境的影响

未来十年我国内陆核电将处在快速增长的阶段,本文以内陆核电站发电原理为基础,考察污染产生种类及成因,探讨我国内陆核电站在正常运营情况下可能对环境产生的影响,并思考发展方向。     

COD仪替代试剂的开发及其在普通分光光度计上的应用研究

对进口的COD测定试剂进行了替代品开发,研制出适用于该仪器的替代试剂。通过实验找到了替代试剂最佳配比。实验证实,自制试剂可完全替代HACH公司的消解试剂用于各种工业和生活废水的消解测定,而且该自制试剂可用于普通分光光度计测定。     

温州近海海域海水及滩涂沉积物中PFOS和PFOA污染特征分析

为了解温州近海海域全氟辛烷磺酸(PFOS)和全氟辛酸(PFOA)的污染状况和特征,采用固相萃取/高效液相串联质谱检测法分析了采自乐清湾、瓯江口、西湾、飞云江口及洞头半屏岛的近海海水和滩涂沉积物中PFOS和PFOA污染水平。结果显示,温州近海海水普遍存在PFOS和PFOA污染,其中,PFOS的浓度范围为<1.0～31.36 ng/L,中位浓度为2.29 ng/L;PFOA的浓度范围为<1.0～23.66 ng/L,中位浓度为5.29 ng/L。滩涂沉积物样品中PFOS和PFOA的浓度范围(干重)分别为(<1.0～11.91)×10-9(中位浓度为3.60×10-9)和(1.84～34.01)×10-9(中位浓度为6.83×10-9)。温州近海海水中PFOS和PFOA的污染水平明显高于香港沿岸、中国南海海水、韩国沿岸海水和近海珠江三角洲,与大连湾的海水相当,海岸滩涂沉积物中的PFOS和PFOA浓度远高于珠江和黄浦江沉积物中的浓度。     

LNAPL在砂质含水层中动态迁移的电阻率法监测试验研究

在海滨潮间带采集细砂,通过室内柴油泄漏模拟试验,利用自制电阻率监测系统对轻非水相液体在砂土-地下水系统垂向渗透过程进行电阻率变化动态监测;通过配制不同含油率砂土测定其静态电阻率变化规律,探讨电阻率变化的影响因素;最后取样分析测定污染含水介质稳定后含水率及含油率,对监测结果有效性进行了验证;并利用显微成像法对污染砂土进行了微观形态分析.结果表明,柴油污染砂土微观形态上胶结现象明显;柴油渗透海滨砂土过程电阻率大小同含水饱和度,比电阻率和含油饱和度之间存在良好的相关性,均可用Archie公式拟合,n值分别为2.36和0.15;通过电阻率测定可以有效估算柴油透镜体厚度;电阻率随深度的变化可以反映含油率和含水率的垂向分布.本研究为轻质油品储罐或者海上油品输运过程泄露造成的海滨砂土地下污染扩散过程监测及机制研究提供了一种有效的方法,也可为其他典型石油泄漏污染场地的电阻率法探测或监测提供参考.     

串联毛细管柱气相色谱分析石脑油中微量甲基叔丁基醚

应用Agilent 6890 plus 气相色谱仪(配有FID),把一根50 m×0.25 mm×0.5 μm PEG-20M毛细管色谱柱和一根100 m×0.25 mm×0.5 μm HP-1毛细管色谱柱串接,使得甲基叔丁基醚(MTBE)能和石脑油中其它组分完全分离,解决了石脑油中微量MTBE的测定难题.方法的标准偏差是0.20%,回收率为100%.     

国外高绩效人力资源实践：理论回顾、分析与展望

顺应组织发展要求构建有效人力资源管理模式,增强企业的持续竞争力,已经成为战略人力资源管理的热点之一。通过梳理近年来相关研究成果,剖析国外高绩效人力资源实践的概念及其构成。从员工态度和行为、组织资本、组织能力等方面指出高绩效人力资源实践的结果变量。根据实证研究相关文献,梳理高绩效人力资源实践与企业绩效的内在关联性。在此基础上,提出高绩效人力资源实践的未来研究方向,为相关理论和实证研究提供指导。     

CFD技术在水处理紫外消毒中的应用

介绍了紫外消毒在水处理中应用的现状,阐述了计算流体力学(CFD)的基本原理及其应用背景;论述了CFD技术在紫外消毒模型建立方面的关键因素:水力、辐射和剂量模拟;从消毒效率预测和设备结构优化两个方面对CFD技术在水处理紫外消毒中的应用进行了分析,并对其前景进行了展望,提出了今后的研究重点。     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.     

吹扫捕集-气相色谱法测定水中的乙醛和丙烯醛

建立了吹扫捕集-气相色谱法测定水样中乙醛和丙烯醛的方法,并对吹扫捕集测试条件进行优化,考察了吹扫温度和吹扫时间对吹扫捕集效率和方法检出限的影响。在50℃下,吹扫时间为20 min时,该方法乙醛和丙烯醛的检出限分别为0.001 2 mg/L、0.000 6 mg/L,相对标准偏差分别为3.5%～6.9%、2.9%～5.8%,加标回收率分别为91.6%～108%、92.0%～105%。与GB3838-2002推荐使用的分析方法相比较,该方法具有操作简便、灵敏度高、重复性好、基本上不消耗有机溶剂等特点,可满足地表水和废水中乙醛和丙烯醛的测定要求。