甲磺酸帕珠沙星中甲烷磺酸的离子色谱法测定

建立了甲磺酸帕珠沙星中甲烷磺酸的离子色谱分析方法.选用亲水性的阴离子交换柱IonPac ASl8作分析柱,在线淋洗液发生器产生的KOH为淋洗液,等度淋洗,电导检测,在10min内完成甲烷磺酸分析.结果表明,在0.7-140mg·l-1范围内线性良好(r2=0.9998),样品峰面积的RSD为0.494%(n=7),回收率为107.2%.方法简便、快速、基体干扰小,可在甲磺酸帕珠沙星产品的检验中发挥重要作用.     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.     

综合管廊内火灾自动报警探测器实验研究

为了能够有效提升综合管廊内火灾自动报警系统的准确性和可靠性,本文采用火灾实体试验的方法,通过对各类型火灾自动报警探测器响应时间的情况进行分析和比较,研究综合管廊电力舱内常用探测器的性能。研究结果表明:接触式缆式线型感温火灾探测器可以较早的探测到电缆温度异常变化的现象,可用于早期预警。点型感烟探测器对烟粒子浓度较为敏感,可用于综合管廊电力舱室的空间探测。分布式光纤型感温火灾探测器对明火温度的变化较为敏感,作为空间型的火灾探测器比较可靠。     

苦味酸测定中关键问题的研究

目前测定苦味酸的国标方法为《生活饮用水标准检验方法有机物指标》(GB/T 5750.8—2006)中的衍生物-液液萃取-气相色谱法,在实际测试过程中,发现水样pH值和基质效应会影响苦味酸测定。当pH值为8~12时,生成的氯化苦响应强度变化不大;在pH约为13时,响应强度最大。水质中除腐殖酸、硝基甲烷及2,4,6-三硝基甲苯会影响苦味酸测定外,硝基酚类和甲基酚类同样起到正干扰作用,因此,国标方法不能全面和准确地测定水中的苦味酸含量。     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Experimental investigation of the lower flammability limit of volatile liquid fuel-aluminum powder mixtures in air

Aluminum powder was always chosen as an additive to improve the explosive performance. In this work, experiments were performed to investigate the lower flammability limit (LFL) of volatile liquid fuel-aluminum powder mixtures using a 20 L closed spherical stainless steel vessel at a temperature of 20 °C (293 K) and 40 °C (313 K). The volatile liquid fuels tested in the work were diethyl ether (DEE), epoxypropane (PO), n-pentane and n-hexane. DEE, PO and n-pentane are in the liquid phase at room temperature and can easily transition to the gas phase at 40 °C (313 K). Through a series of experiments carried out, it was found that the change in phase would affect the interaction between the components. Aluminum powder always has an inhibitory effect on the flammability of the mixtures when it is mixed with gas-phase fuels. The inhibition effect was most obvious when the aluminum powder concentration reached 200 g/m³. While the interaction between aluminum powder and liquid-phase volatile fuels was promotion and was influenced by the component proportion and the type of the volatile fuels.     

Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.     

An LC-MS/MS method for creatine and creatinine analysis in paraquat-intoxicated patients

Abstract

A sudden increase in serum creatinine after paraquat intoxication has been reported in several clinical studies. However, this dramatic change of creatinine may be possibly due to an interconversion of creatine-creatinine in relation to paraquat toxicity. In order to investigate the creatine-creatinine relationship, a liquid chromatography tandem mass spectrometry in combination with electrospray ionization was developed and validated for simultaneous determination of creatine and creatinine in the serum. The chromatographic separation was achieved on a Gemini® C₆-Phenyl column with a gradient elution consisting of 0.1% formic acid in ultrapure water and methanol as the mobile phase. The method yielded suitable levels of specificity and selectivity, and calibration curves of creatine and creatinine in serum were linear over the concentration range of 0.5–200?µg mL^?1. The limit of quantification of both compounds was 0.5?µg mL^?1, and the method was accurate within the recovery range of 96.23–102.75%, indicating the robustness of the method. The method was successfully applied to toxicological samples from paraquat-intoxicated patients, and the concentrations of creatine and creatinine were quantified. High creatine concentrations in serum samples were observed which may lead to high serum creatinine despite normal kidney function as creatine is converted to creatinine in proportion to its concentration.     

UV Spectroscopic Monitoring of Vaporized Monoaromatic Hydrocarbons from Petroleum-Contaminated Soils

Fast and simple systems using ultraviolet (UV) absorbance were examined for on-line monitoring of monoaromatic hydrocarbons from petroleum-contaminated soils in this research. Since soil particles hinder the UV light transmittance, the absorbance measurement of vaporized monoaromatic hydrocarbons in soil gas extracted from petroleum-contaminated soils was proposed. In the fixed system that exhibited higher sensitivity than the portable one, the absorbance intensity of benzene, toluene, ethylbenzene, and xylene increased in proportion to the concentration of the contaminants. The portable system, however, was suitable for screening purpose, while it exhibited faster response. There was no interference from water, which helps the applicability of the proposed systems to the actual fields.