人工湿地污水处理技术与节约型城市的建设

人工湿地污水处理技术是一个完整的生态系统，正不断得到研究应用和发展，具有出水水质好、增加绿地面积、改善和美化生态环境、操作简单、维护和运行费用低廉等优点，是建设节约型城市的重要措施之一，具有极其广阔的应用前景。     

Assessing microbial degradation of o-xylene at field-scale from the reduction in mass flow rate combined with compound-specific isotope analyses

In recent years, natural attenuation (NA) has evolved into a possible remediation alternative, especially in the case of BTEX spills. In order to be approved by the regulators, biodegradation needs to be demonstrated which requires efficient site investigation and monitoring tools. Three methods--the Integral Groundwater Investigation method, the compound-specific isotope analysis (CSIA) and a newly developed combination of both--were used in this work to quantify at field scale the biodegradation of o-xylene at a former gasworks site which is heavily contaminated with BTEX and PAHs. First, the Integral Groundwater Investigation method [Schwarz, R., Ptak, T., Holder, T., Teutsch, G., 1998. Groundwater risk assessment at contaminated sites: a new investigation approach. In: Herbert, M. and Kovar, K. (Editors), GQ'98 Groundwater Quality: Remediation and Protection. IAHS Publication 250, pp. 68-71; COH 4 (2000) 170] was applied, which allows the determination of mass flow rates of o-xylene by integral pumping tests. Concentration time series obtained during pumping at two wells were used to calculate inversely contaminant mass flow rates at the two control planes that are defined by the diameter of the maximum isochrone. A reactive transport model was used within a Monte Carlo approach to identify biodegradation as the dominant process for reduction in the contaminant mass flow rate between the two consecutive control planes. Secondly, compound-specific carbon isotope analyses of o-xylene were performed on the basis of point-scale samples from the same two wells. The Rayleigh equation was used to quantify the degree of biodegradation that occurred between the wells. Thirdly, a combination of the Integral Groundwater Investigation method and the compound-specific isotope analysis was developed and applied. It comprises isotope measurements during the integral pumping tests and the evaluation of delta13C time series by an inversion algorithm to obtain spatially integrated mean isotope values at the control planes. It was shown that the Rayleigh equation is applicable to spatially integrated mean isotope values in order to obtain the mean biodegradation between the consecutive control planes. All three approaches yielded consistently a 98-99% degradation of o-xylene.     

Axi-symmetric simulation of soil vapor extraction influenced by soil fracturing

Fracturing, either pneumatic or hydraulic, is a method to improve the performance of soil vapor extraction (SVE) in relatively low permeability soils (< 10(-5) cm/s). A two-dimensional model is presented to simulate trichloroethylene (TCE) soil vapor extraction modified by fracturing. Flow and transport is modeled using mobile macropore and micropore networks, which also have been identified in the literature as dual porosity, dual permeability, or heterogeneous flow models. In this model, fluids can flow in both the macropore and micropore networks. This represents a more general model compared to immobile micropore, mobile macropore models presented thus far in the literature for vapor flow and transport in two dimensions. The model considers pressure- and concentration-driven exchange between the macropore and micropore networks, concentration-driven exchange between the gas and sorbed phases within each network, and equilibrium exchange between the gas and water and a sorbed phase within each network. The parameters employed in an example simulation are based on field measurements made at a fractured site. Considered in the simulations were the influence of the volume percentage of fractures, the length of fractures, the relative location of the water table, and the influence of pulsed pumping. For these simulations, internetwork concentration-driven exchange most significantly affected mass removal. The volume percentage of fractures more significantly influence flow and mass removal than the length of fractures. The depth of the water table below the contamination plume only significantly influenced flow and mass removal when the water table was within 60 cm of the bottom of the contaminated soil in the vadose zone for the parameters considered in this study. Pulsed pumping was not found to increase the amount of mass removed in this study.     

运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计

二次风口的合理布设是实现炉膛内气体混合均匀、反应完全的有效措施之一，运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计，借助PHOENICS软件模拟二次风口对炉内流场的影响。通过模拟发现，二次风口的布设可明显提高烟气的湍流程度．前后墙各设一排直径为0．04m的二次风口可以实现最佳的炉膛流场工况。     

表面活性剂冲洗法治理非水卡流体污染多相流研究进展

表面活性剂冲洗法是一种治理土壤与地下水非水相流体（NAPLs）污染的有效技术。在简要介绍表面活性剂冲洗法去除作用机理的基础上，总结了近些年来与表面活性剂冲洗法多相流相关的国内外试验研究和模型研究成果，主要包括表面活性剂作用所引起的混溶驱替和不混溶驱替多相流问题，并指出目前研究中存在的问题和进一步探讨的方向。     

污水处理中的人工湿地强化技术研究

人工湿地作为一种新型污水生态处理工艺受到越来越广泛的重视，在生活污水、特种工业废水、采矿污水、农业和畜牧业污水以及水产养殖废水等处理中得到了广泛的应用。但是其本身的局限却限制了它在高浓度废水、某些工业废水处理等方面的应用，在寒冷地区的应用也受到限制。本研究分析了一些强化技术（如湿地内部要素强化、工艺强化和工程强化等）在提高人工湿地的净化效能以及扩大其应用范围的可能性。     

微细水雾除尘技术的实验研究

分析了煤矿并下呼吸性粉尘防治技术现状，并对水的超声雾化技术进行了实验研究，应用回归分析建立了超声雾化性能的数学模型。在分析微细水雾捕尘机理及捕尘水雾凝并沉降技术的基础上，设计了一集微细水雾捕尘-凝聚、凝并降尘-惯性沉降分离为一体的含尘气流净化系统，并对该系统的除尘效率进行了实验研究，建立了相应的数学模型。     

复合植物床式人工湿地研究

本实验研究针对应用于面源污染控制的人工湿地中水生植物的选择和布置问题进行研究,通过对人工湿地动态运行实验的研究考察,发现床体中COD、TN降解规律,通过人工湿地栽种不同水生植物的各床体的COD去除效果比较实验和不同水生植物复氧性能比较实验,得出复氧性能最好的水生植物为芦苇,然后综合这三个实验,在传统的植物床系统基础上,提出更加有利于提高系统污水处理效率的改进形式:复合植物床式人工湿地。     

处理生活污水的植物品种的筛选

以小型碎石床人工湿地生态系统和无土栽培2种方法,模拟研究了广东园林绿化中常用的27种植物对生活污水中氮、磷、COD的降解能力,表明野芋头、花叶万年青、象草、姜花、绿公主、富贵竹、再力花、大花叶万年青、芦苇、花芦苇、美人蕉、文殊兰、水芋头、风车草、红草、蜘蛛兰、千手观音、水葱和花蝴蝶等18种植物,可以作为人工湿地生态系统选种植物,从而扩大了可选植物品种范围,配合适当,可达到美化环境和净化污水2种功能,可适用于面源性水污染的治理.象草的研究表明,它是一种既有强污水降解能力又能作饲料的品种,适用于畜牧场的水污染治理.     

Migration of saline solutions in variably saturated porous media

Migration of concentrated NaNO3 solutions in homogeneous packs of pre-wetted silica sands was investigated using a light transmission system. Solutions of 5 molal NaNO3 were found to migrate downward 24-62% faster than pure water, in an unstable, fingered manner. This behavior was attributed primarily to a surface tension induced, non-zero apparent contact angle between the imbibing and the resident fluids. For saline solutions of similar surface tension to that of pure water (achieved by the addition of 2% methanol), the migration rates and plume shapes were comparable to that of water, demonstrating that density was not the primary source of the observed differences in migration patterns. At depths where resident saturation increased above residual, the migration process appeared to occur via film flow with slight changes in saturation (<4%), rather than in a series of abrupt jumps, as observed at shallower depths. A method for contact angle scaling was used to illustrate the effects of non-zero contact angles on capillary pressure-saturation curves.