ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

辅料配比对污泥生物-物理联合干燥的影响

利用自主研制的污泥生物-物理联合干燥反应系统研究了脱水污泥∶树皮∶回流污泥分别为7∶3∶0.5、9∶3∶0.5和12∶3∶0.5时,污泥生物-物理联合干燥过程中温度、含水率等参数的变化规律.结果表明,污泥温度随干燥时间延长先增大后减小,含水率在0～96 h逐渐降低,继续延长反应时间,则变化不明显.当脱水污泥∶树皮∶回流...     

Mobilities and leachabilities of heavy metals in sludge with humus soil

Chemical forms of Zn, Ni, Cu, and Pb in municipal sewage sludge were investigated by adding humus soil to sludge and by performing sequential extraction procedures. In the final sludge mixtures, Zn and Ni were mainly found in Fe/Mn oxide-bound (F3) and organic matter/sulfide-bound (F4) forms. For Zn, exchangeable (F1), carbonate-bound (F2), and F3 forms were transformed to F4 and residual forms (F5). For Ni, F1 and F2 forms were transformed to F1, F2, and F3 forms. Both Cu and Pb were strongly associated with the stable forms F4 and F5. For Cu, F2 and F3 forms were major contributors, while for Pb, F3 and F4 forms were major contributors to F5. Humus soil dosage and pH conditions in the sludge were strongly correlated with the forms of heavy metals. Five forms were used to evaluate metal mobilities in the initial and final sludge mixtures. The mobilities of the four heavy metals studied decreased after 28 days. The metal mobilities in the final sludge mixtures were ranked in the following order: Ni > Zn > Cu = Pb. Leaching tests showed that the mobilities of Zn and Ni in lower pH conditions (pH 4) were higher than those in higher pH conditions (pH 8).     

两种抗生素对塔玛亚历山大藻生长和产毒的影响

论文以中国南海筛选的一株塔玛亚历山大藻Alexandrium tamarense C101为研究对象,研究了两种抗生素,氨苄青霉素(ampicillin,Amp)和新霉素(neomycin,Nm)对A.tamarense C101细胞生长、形态以及毒素含量的影响.结果表明:和空白对照组相比,经1 500μg/mL Nm...     

黑岱沟露天矿排土场不同植被配置土壤水分研究——土壤水分垂直动态研究

文章通过黑岱沟露天煤矿排土场不同植被配置土壤水分垂直动态研究,阐述了不同植被配置类型对土壤水分的影响。结果显示：9种植被配置类型的土壤台水量随土层深度的增加而减小,但变化幅度有差异;原生植被处的土壤水分利用层厚度大于人工植被。     

紫色丘陵区不同弃土弃渣下垫面入渗特征及影响因素

采用环刀法研究了紫色丘陵区不同碎石含量弃土弃渣下垫面的入渗特征及影响因素.结果表明,不同弃土弃渣下垫面入渗性能随碎石含量的增加而差异显著,其中,碎石含量为40%的弃土弃渣下垫面初始入渗率、稳定入渗率及平均入渗率分别是土质弃渣下垫面的1.30、1.13和1.54倍.不同下垫面初始入渗率和稳定入渗率与弃渣初始含水率、容重呈显著负相关,与下垫面总孔隙度、非毛管孔隙度呈显著正相关.其中,初始入渗率与初始含水率相关系数在-0.689~-0.912之间,稳定入渗率与容重相关系数为-0.745~-0.999,且稳定入渗率随非毛管孔隙度增加而显著提高.Horton模型对不同弃土弃渣下垫面入渗率与时间拟合的可决系数在0.899以上,且Horton模型计算入渗率与实测入渗率的相对误差在0.07%~6.60%之间,是紫色丘陵区分析不同弃土弃渣下垫面入渗过程的适宜性模型.研究结果可为紫色丘陵区弃土弃渣水土流失量预测和评价提供技术参数.     

建设项目环境影响后评价的主要内容及存在的问题研究

根据《中华人民共和国环境影响评价法》的有关条款,探讨了建设项目环境影响后评价的定义、适用对象、工作内容、工作程序。同时,结合多年的环境管理经验,分析了典型行业环境影响后评价的重点,并指出了目前中国建设项目环境影响后评价存在的问题,提出了改进和完善的建议。实践表明,开展环境影响后评价有助于提高环境管理决策水平。     

钙、氯对磷酸盐稳定污染土壤中铅的促进作用研究

为探讨促进磷酸盐稳定污染土壤中铅的方法,在全铅含量为517 mg·kg-1的铅冶炼污染土壤中加入5 mmol·kg-1磷酸盐,同时加入10mmol·kg-1硝酸钙或5 mmol·kg-1氯化钾,在15%或30%的含水率下培养40 d,之后种植黑麦草.结果表明,与单独施用磷酸盐相比,采用磷酸盐与钙、氯结合或增加培养期间的土壤含水率后,土壤DTPA-Pb含量下降3.92%~26.1%;对于同一添加剂处理,培养期间土壤含水率从15%增加到30%,土壤有效铅(DTPA-Pb)含量下降8.83%~24.4%.增加土壤含水率后,土壤有效磷(Olsen-P)含量均显著升高(p0.05).土壤铅的EXAFS分析表明,与未施用磷酸盐的对照相比,土壤中加入磷酸盐后矿物态铅的比例由57%上升至81%,加施钙、氯或增加土壤含水率后,多数处理矿物态铅的比例有所下降,而有机结合态铅比例上升.与对照相比,污染土壤中施用磷酸盐后,植物产量大幅增加,但施用钙、氯或增加培养期间含水率后,部分处理植物产量有所下降.以上结果表明,在铅冶炼污染土壤中加入磷酸盐时,加入钙、氯或者增加土壤含水率均有利于铅的稳定,但以上措施可能对植物生长产生不利影响.     

Toluene removal characteristics by a superimposed wire-plate dielectric barrier discharge plasma reactor

A superimposed wire-plate dielectric barrier discharge reactor was used to remove toluene in this study. The effects of oxygen content, gas flow rate, gas initial concentration and with/without catalyst on toluene decomposition were investigated. It was found that an optimal toluene removal was achieved when the oxygen content was about 5%. Under this condition, the highest toluene removal efficiency of 80.8% was achieved when the gas concentration was 80 mg/m^3. The toluene removal efficiency decreased with the increase of the gas flow rate and the initial concentration of toluene. In addition, the ozone concentration decreased with the increase of the initial concentration of toluene. It suggested that combining DBD （dielectric barrier discharge） with Co3O4/Al2O3/foam nickel catalyst in-situ could improve the toluene removal efficiency and suppress ozone formation. Products analysis showed that the main products were CO and CO2 when oxygen was more than 5%.