Equilibrium and kinetics of copper(Ⅱ) biosorption by Myriophyllum spicatum L.

The potential use of Myriophyllum spicatum L. biomass as a biosorbent for the removal of copper(Ⅱ) from aqueous solution was investigated in laboratory condition. The sorption experiments were undertaken to obtain copper (Ⅱ) biosorption properties of M.spicatum L., i.e. equilibrium time, the maximum capacity, and rate constants. Copper(Ⅱ) biosorption was fast and equilibrium was attaine1 within 35 min at initial copper(Ⅱ) concentration of 6 mg/L. Different isotherm models including the Langmuir, Freundlich, Temkin and Redlich-Peterson model, were used to investigate the sorption capacity and isotherm. These models showed an excellent match with the experimental data except for the Freundlich model. According to the Langmuir coefficients, the maximum sorption capacity of copper onto M. spicatum L. was 10.80 mg/g. The kinetics of copper(Ⅱ) sorption was also analysed and rate constants were derived. It was found that the overall sorption process was best described by the pseudo second-order equation, and that intraparticle diffusion was not the rate determining step. The results of this study showed that M. spicatum L. can be considered as useful vehicles for the removal and recovery of copper(Ⅱ) from aqueous solutions.     

WHIPPET: A novel tool for prioritizing invasive plant populations for regional eradication

Large geographic areas can have numerous incipient invasive plant populations that necessitate eradication. However, resources are often deficient to address every infestation. Within the United States, weed lists (either state-level or smaller unit) generally guide the prioritization of eradication of each listed species uniformly across the focus region. This strategy has several limitations that can compromise overall effectiveness, which include spending limited resources on 1) low impact populations, 2) difficult to access populations, or 3) missing high impact populations of low priority species. Therefore, we developed a novel science-based, transparent, analytical ranking tool to prioritize weed populations, instead of species, for eradication and tested it on a group of noxious weeds in California. For outreach purposes, we named the tool WHIPPET (Weed Heuristics: Invasive Population Prioritization for Eradication Tool). Using the Analytic Hierarchy Process that included expert opinion, we developed three major criteria, four sub-criteria, and four sub-sub-criteria, taking into account both species and population characteristics. Subject matter experts weighted and scored these criteria to assess the relative impact, potential spread, and feasibility of eradication (major criteria) for 100 total populations of 19 species. Species-wide population scores indicated that conspecific populations do not necessarily group together in the final ranked output. Thus, priority lists based solely on species-level characteristics are less effective compared to a blended prioritization based on both species attributes and individual population and site parameters. WHIPPET should facilitate a more efficacious decision-making process allocating limited resources to target invasive plant infestations with the greatest predicted impacts to the region under consideration.     

GB 13223修订后火电用袋式除尘技术发展状况探讨

《火电厂大气污染物排放标准》（GB 13223-2003）修订后,将进一步推动袋式除尘技术在火力发电行业烟尘治理方面的应用。总结了袋式除尘技术在火电厂燃煤锅炉应用的状况,分析了＂十二五＂对现有机组改造和新建机组配套的袋式除尘技术投资总额状况,并说明它将是袋式除尘技术实现30%增长率的重要部分;进一步探讨＂十二五＂期间烟尘排放控制将从重设施建设向重控制效果转变,提出了发展袋式除尘器运营管理服务业设想,预测了袋式除尘器运营管理服务的市场容量。     

Seismic response mitigation of chemical plant components by passive control techniques

This paper deals with the applicability of seismic passive control in major-hazard chemical installations. The objective is to show numerically and experimentally the applicability of Passive Control Techniques (PCT) in industrial plants. Consequently, the main components of a process plant are classified and collected into a limited number of classes; for each class, the main damages caused by past earthquakes are described and the most vulnerable components are identified. A synthesis of the effects of earthquakes on the different typologies of process components is also presented and the most suitable innovative seismic protection systems, in particular passive control techniques (PCT), are acknowledged. Finally, the effectiveness of PCT in reducing the seismic response of process plant components is proved by three representative case studies: a base isolated above-ground storage tank, a distillation column connected by elastoplastic dampers to the adjacent service frame and an application of non-conventional Tuned Mass Dampers to a support frame.     

Soil bound residues of carbaryl and 1‐naphthol: Release and mineralization in soil,and uptake by plants

Abstract

¹⁴C‐carbaryl and ¹⁴C‐1‐naphthol form soil bound residues which get partially released when barley was grown. ¹⁴C‐residues could be detected in both shoot and root in the case of carbaryl treatment while only roots showed ¹⁴C‐residues in the case of 1‐naphthol. Flooding enhanced release of the bound residues while soil amendment did not. There was greater mineralization of bound residues of carbaryl than that of 1‐naphthol. Rice straw amendment enhanced mineralization.     

The presence of zinc in Swedish waste fuels

Zinc (Zn) is a chemical element that has gained more attention lately owing to its possibility to form corrosive deposits in large boilers, such as Waste-to-Energy plants. Zn enters the boilers in many different forms and particularly in waste, the amount of Zn is hard to determine due to both the heterogeneity of waste in general but also due to the fact that little is yet published specifically about the Zn levels in waste. This study aimed to determine the Zn in Swedish waste fuels by taking regular samples from seven different and geographically separate waste combustion plants over a 12-month period. The analysis shows that there is a relation between the municipal solid waste (MSW) content and the Zn-content; high MSW-content gives lower Zn-content. This means that waste combustion plants with a higher share of industrial and commercial waste and/or building and demolition waste would have a higher share of Zn in the fuel. The study also shows that in Sweden, the geographic location of the plant does not have any effect on the Zn-content. Furthermore, it is concluded that different seasons appear not to affect the Zn concentrations significantly. In some plants there was a clear correlation between the Zn-content and the content of other trace metals.     

同异反向量模型在电厂安全评价中的应用

根据集对分析理论,针对安全评价系统的不确定性特点,采用了同异反向量模型对某电厂进行安全评价,评价结果与原文献吻合.该方法数学表达式简单,计算方便,物理意义明确.在安全评价过程中,差异度系数I的不同取值,反映了该电厂安全状况的变化,是安全管理工作的"晴雨表",可以使安全状况受到"增益"或"惩罚",映射出安全管理工作的重要性.这种方法为企业管理者提供了量化分析,使管理者对企业的安全程度及发展趋势有了更确切的了解,为安全管理工作提供依据.     

Preliminary study of physico-chemical treatment options for hospital wastewater

Hospital effluents are loaded with pathogenic microorganisms, partially metabolized pharmaceutical substances, radioactive elements, and other toxic substances. Such effluents if not treated properly can damage the natural environment and create a biological imbalance. This paper points out the areas of concern for hospital wastewater disposal and reports the findings of a limited physico-chemical study of treatment options for hospital effluents conducted at Christian Medical College and Hospital, Vellore, Tamil Nadu. The effluent collected was checked for conventional parameters and subjected to coagulation experiments. The raw and settled effluents were coagulated with FeCl(3), filtered and disinfected. Physico-chemical treatment seems to be an attractive option for the cost-effective disposal of hospital effluents. The results of this study call for further detailed study in this area.     

Bioecological characteristics of segetal flora in the Middle Urals

The data on the biological diversity, bioecological features, and geographic variations of segetal plants in the Middle Urals are presented for the first time. It has been shown that apophytic and anthropophytic groups are equally represented among them. Each group is characterized, and the phytocoenotic activity of segetal plants is considered.     

Higher Taxa as Surrogates of Plant Biodiversity in a Megadiverse Country

Abstract:  An important question in conservation biology is the extent to which the number of taxonomic supraspecific categories can serve as surrogates of species richness. This issue has been little explored in highly diverse areas. We used 113 floristic inventories from throughout Mexico, a megadiverse country, to evaluate the potential of higher-taxon richness for predicting local species richness of vascular plants. This large biodiversity data set includes the main vegetation types found across the country. In all, 247 families, 2,398 genera, and 11,890 species were used for the analysis, representing 99.6%, 90.2%, and 53.2% of the respective totals recorded in the country. We hypothesized that the number of genera and species would be accurately predicted by the richness of the higher taxon. To avoid getting spurious regressions resulting from the logical increase in lower-taxon richness as a higher taxon becomes richer, we calculated new response variables by subtracting from the number of elements in the lower taxon group the number of those in the higher taxon; these variables were "excess species" (number of species minus number of genera or families) and "excess genera" (number of genera minus number of families). Our results indicate that genera provide very effective surrogates for estimation of local species richness ( R ²= 0.85), whereas families have a more limited potential for this purpose ( R ²= 0.64). The predictive capacity of the diversity of higher taxon increased when the analyses were constrained to particular vegetation types (maximum R ²= 0.95 for genera). This surrogate method may be a valuable tool in locating and designing representative systems of protected areas for vascular plant diversity, especially in megadiverse countries, where conservation efforts are hindered by the lack of complete inventories and insufficient resources.