Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

循环经济工业园区规划环评研究

概括了循环经济工业园区规划环境影响评价的框架思路。归纳总结了规划环评的主要内容,并以山西省长治市襄垣富阳循环经济工业园区为例,对规划环评指标体系的构建进行探讨。     

工业锅炉PM2.5产排特性试验研究

采用荷电低压颗粒撞击器(ELPI)对哈尔滨市两台燃用烟煤的工业锅炉PM2.5排放特性进行了研究.研究结果表明:PM2.5的粒数和质量浓度分布曲线均呈现单峰分布,前者峰值出现在0.12~0.2μm粒径范围内,这部分粒子主要是由无机物气化-凝结形成的亚微米颗粒物和挥发分未完全燃烧形成的炭黑粒子,而后者峰值出现在0.32μm处,粒子主要是由炭黑粒子形成的亚微米颗粒和残灰粒子形成的超微米颗粒.同时发现,旋风除尘和湿法除尘对PM2.5各级颗粒均有一定的去除效果,采用多管旋风和冲击水浴除尘器联合除尘效率比单种水膜除尘器除尘效率高;湿法脱硫系统对PM2.5的脱除也有明显的作用,由于除雾器不能全部去除小雾滴,这些雾滴中固体颗粒被干燥和水溶性物质结晶析出,PM0.32颗粒物粒数浓度有所增加,而PM0.32~2.5的颗粒物粒数浓度有所减少,但总质量浓度降低.     

电化学法处理工业废水的现状与发展研究

随着工业的快速发展,如何对工业废水进行高效处理是我们需要解决的问题。电化学方法反应装置简单,反应效率高,不会产生二次污染。对中国工业废水目前常用的电化学处理技术的进展和应用进行了综述,包括电化学氧化、电化学还原、电絮凝、电渗析等内容,对国内外的研究成果的总结可知,电化学法对工业废水的处理效率较高,有一定的应用前景。同时对电化学法将来的重点研究方向提出了展望。     

江西省工业园区环境报告书编制导则研究

研究对于江西省工业园区环境信息的公开,提高环境信息公开内容的准确性,实现不同园区间环境业绩的比较,促进工业园区自主环保、积极引导和公众广泛参与环境管理机制的形成具有重要意义.文章介绍了工业园区在全国和江西省经济社会发展中的重要作用,分析江西省工业园区污染物排放现状与趋势以及国内外导则编制研究情况,重点对导则主要技术内容和分类进行说明,分析了导则实施的可行性,提出了实施建议.     

卤系阻燃剂在东江工业水体中的质量浓度及其分配特征

本研究分析了东江工业水体中卤系阻燃剂的浓度,组成分布以及分配特征.结果表明多溴联苯醚(PBDEs)是水体中的主要的卤系阻燃剂,占总卤系阻燃剂的41.0%,其质量浓度范围为1 102.3~3 666.9 pg·L~(-1),其中BDE209是颗粒相的主要成分.四溴双酚A(TBBPA)占总卤系阻燃剂的32.4%,其质量浓度范围为1 120.9~2 856.5 pg·L~(-1),其他卤系阻燃剂如十溴二苯乙烷(DBDPE)、德克隆(DP)和六溴环十二烷(HBCDs)分别占总卤系阻燃剂的16.3%、7.3%和3.0%,其质量浓度范围分别为397.7~1 736.8、235.7~778.1和9.5~266.8 pg·L~(-1).在对水体溶解相和颗粒相分配的研究中发现,PBDEs、DBDPE、DP和HBCDs主要存在于水体颗粒相中,而TBBPA由于其较大的水溶性,主要存在于溶解相中;卤系阻燃剂的lgK_(oc)与lgK_(ow)之间存在显著的相关性,但是lgK_(oc)实测值与其理论预测值有一定差异,这可能是受控于悬浮颗粒(SPM)含量和溶解有机碳(DOC)含量这两个因素,此外,颗粒相和溶解相之间分配是否达到平衡也是影响测量lg Koc值的因素.     

Suspended Particulate Matter Distribution in Rural-Industrial Satna and in Urban-Industrial South Delhi

An air quality sampling program was designed and implemented to collect the baseline concentrations of respirable suspended particulates (RSP = PM₁₀), non-respirable suspended particulates (NRSP) and fine suspended particulates (FSP = PM_2.5). Over a three-week period, a 24-h average concentrations were calculated from the samples collected at an industrial site in Southern Delhi and compared to datasets collected in Satna by Envirotech Limited, Okhla, Delhi in order to establish the characteristic difference in emission patterns. PM_2.5, PM₁₀, and total suspended particulates (TSP) concentrations at Satna were 20.5 ± 6.0, 102.1 ± 41.1, and 387.6 ± 222.4 μg m⁻³ and at Delhi were 126.7 ± 28.6, 268.6 ± 39.1, and 687.7 ± 117.4 μg m⁻³. Values at Delhi were well above the standard limit for 24-h PM_2.5 United States National Ambient Air Quality Standards (USNAAQS; 65 μg m⁻³), while values at Satna were under the standard limit. Results were compared with various worldwide studies. These comparisons suggest an immediate need for the promulgation of new PM_2.5 standards. The position of PM₁₀ in Delhi is drastic and needs an immediate attention. PM₁₀ levels at Delhi were also well above the standard limit for 24-h PM₁₀ National Ambient Air Quality Standards (NAAQS; 150 μg m⁻³), while levels at Satna remained under the standard limit. PM_2.5/PM₁₀ values were also calculated to determine PM_2.5 contribution. At Satna, PM_2.5 contribution to PM₁₀ was only 20% compared to 47% in Delhi. TSP values at Delhi were well above, while TSP values at Satna were under, the standard limit for 24-h TSP NAAQS (500 μg m⁻³). At Satna, the PM₁₀ contribution to TSP was only 26% compared to 39% in Delhi. The correlation between PM₁₀, PM_2.5, and TSP were also calculated in order to gain an insight to their sources. Both in Satna and in Delhi, none of the sources was dominant a varied pattern of emissions was obtained, showing the presence of heterogeneous emission density and that nonrespirable suspended particulate (NRSP) formed the greatest part of the particulate load.     

Impact of Bioaugmentation with a Consortium of Bacteria on the Remediation of Wastewater-Containing Hydrocarbons (5 pp)

Goals, Scope and Background It has been observed that hydrocarbon treated wastewaters still contain high COD and a number of intermediates. This suggests that the required catabolic gene pool for further degradation might be absent in the system or, that its titer value is not significant enough. By providing the desired catabolic potential, the overall efficiency of the treatment system can be improved. This study aims to demonstrate this concept by bioaugmentation of a lab-scale reactor treating refinery wastewater with a consortium having the capacity to complement the alkB genotype to the available microbial population. Methods Two reactors were set up using activated biomass collected from a refinery treatment plant and operated at a continuous mode for a period of 8 weeks. The feed to both reactors was kept constant. Crude oil was spiked regularly. One reactor was bioaugmented with a consortium previously described for crude oil spill remediation. The efficiency of the bioaugmented reactor was demonstrated by reduced COD. The changes in the microbial population over a period of time were analyzed by RAPD. Catabolic activity of the biomass in both reactors was monitored by PCR. The presence of the catabolic loci was confirmed by Southern Hybridization. Results and Discussion 52.2% removal of COD was observed in the bioaugmented reactor while only 15.1% reduction of COD was observed in the reactor without bioaugmentation. The change in microbial population can be seen from the 4th week, which also corresponds to improved catabolic activity. The presence of the bedA locus was seen in all samples, which indicates the presence of aromatic degraders, but the appearance of the alkB locus, from the 6th week onwards, which was observed only in the samples from the bioaugmented reactor. The results suggest that the gene pool of the bioaugmented reactor has catabolic loci that can degrade accumulated intermediates, thus improving the efficiency of the system. Conclusions In this study, improvement of efficiency of bioremediation was demonstrated by addition of catabolic loci that are responsible for degradation. Bioaugmentation was carried out in biomass that was collected from an ETP (effluent treatment plant) treating hydrocarbon containing wastewater to study the strategies for improvement of the treatment system. Biostimulation, only marginally improved the efficiency, when compared to bioaugmentation. The improved efficiency was demonstrated by COD removal. The presence of the alkB locus suggests the importance of a catabolic gene pool that acts on accumulated intermediates. It is well documented that straight chain aliphatics and intermediates of aromatic compounds after ring cleavage, accumulate in refinery wastewater systems, thereby hindering further degradation of the wastewater. Supplementation of a catabolic gene pool that treats the lower pathway compounds and alkanes will improve the overall efficiency. In this study, results suggest that the alkB locus can also be used to monitor the degradative mode of the activated biomass. Recommendations and Perspective . Pollution from petroleum and petroleum products around the globe are known to have grave consequences on the environment. Bioremediation, using activated sludge, is one option for the treatment of such wastes. Effluent treatment plants are usually unable to completely degrade the wastewater being treated in the biological unit (the aerator chambers). The efficiency of degradation can be improved by biostimulation and bioaugmentation. This study demonstrates the improved efficiency of a treatment system for wastewater containing hydrocarbons by bioaugmentation of a consortium that supports degradation. Further experiments on a pilot scale are recommended to assess the use of bioaugmentation on a large scale. The use of molecular tools, like DNA probes for alkB, to monitor the system also needs to be explored.     

Dioxin formation in pulp and paper mills of India

Samples of effluents, sludge, pulp, final products (paper) and soil were collected from the identified pulp and paper mills in India. The samples were analysed for 2,3,7,8-tetrachloro-dibenzo-p-dioxin (2,3,7,8-TCDD) and other dioxin congeners and precursors. Pulp and paper mills using chlorine for the bleaching process showed the presence of 2,3,7,8-TCDD in effluent samples. In the effluent and pulp samples from mills where chlorine dioxide was used as a bleaching agent, the 2,3,7,8-TCDD congener ranged from below the detection limit 0.05 to 0.12 ngL⁻¹/ngg⁻¹. The relative standard deviation of reproducibility and the percent recovery of 2,3,7,8-TCDD were 2.07 and 82.4% in pulp and 2.8 and 92% in effluent, respectively. The 1,3,6,8-TCDD was the only other major dioxin congener found in the treated and untreated effluent and sludge samples. However, dichlorobenzene, trichlorophenyl, and hexachlorobiphenyl were detected in all samples. The formation of dioxins can be minimised by replacing chlorine with chlorine dioxide in bleaching processes in pulp and paper mills.     

RETRACTED ARTICLE: Environmental Impact Assessment of Industrial Structure Change in a Rural Region of China

As the embodiment of human activities, the change of regional industrial structure is an essential driving factor of global environmental change. Consequently, the research on the change of regional industrial structure and associated effects on the environment is one of the key issues of researches on sustainable development, human–environment relationship, and regional response to global environment change. However, compared to the flourish of researches on environmental impact assessment of industrial departments, few studies have been conducted to assess the environmental impact of regional industrial structure. In this study, based on a synthetic analysis of environmental disturbances of different industrial departments, the environmental impact coefficient of industrial department associated with the index of environmental impact of industrial structure was constructed, so as to make a quantitative assessment of environmental impact of the change of regional industrial structure. And the results of the case study in Lijiang City, a rural region of China, have showed that there are two obvious changes of industrial structure in the study area from 1992 to 2003, associated with a continuous decreasing of the index of environmental impact of industrial structure, which indicated a positive environmental effects of the change of regional industrial structure.