中高层砌块砌体结构Pushover分析研究

对3种不同中高层砌块砌体结构(分别为10层、15层和18层砌块砌体结构)进行大量时程分析,对结构的惯性力分布进行研究,提出一种新的适用于中高层砌块砌体结构Pushover分析的侧向力分布模式-抛物线型分布模式,并用该模式分别对3种砌块砌体结构进行Pushover分析。通过将Pushover得到的结构能力曲线与时程分析方法得到的结构能力曲线进行比较,将10层砌块砌体结构的Pushover分析结果与一座1/4比例的10层砌块砌体模型结构的振动台试验结果进行比较。比较结果表明:笔者所提出的侧向力分布模式适用于中高层砌块砌体结构的Pushover分析。     

论楔块运动与地震带的关系

目前，地震和地震带的成因问题仍然是世界性的科学难题。本研究认为圈闭隐爆作用能形成正楔块、倒楔块；负荷均衡作用能引起楔块运动；楔块运动形成了断陷盆地，也就是说，地堑、地垒是楔块运动的产物；最终，试图通过对楔块运动模式的研究揭示地壳凹陷与地震带的成因问题。     

A Sensitive Electrochemical Impedance Spectroscopy Method for Detection of Polyimide Degradation by Microorganisms

An electrochemical impedance spectroscopy (EIS) technique was evaluated for monitoring microbial degradation of electronic packaging polyimides. The microbial inoculum was a mixed culture of fungi isolated previously from deteriorated polyimides. The active fungal consortium comprised Aspergillus versicolor, Cladosporium cladosporioides, and a Chaetomium species. After inoculation, fungal growth on the polyimides resulted in distinctive EIS spectra indicative of polymer insulation failure, which directly related to polymer integrity. Degradation appeared to occur in a number of steps and two distinctive stages in the decline of film resistance were observed in the inoculated EIS cells within the 2 and 10 weeks after inoculation. The early stage of resistance decrease may be related to the ingress of water molecules and ionic species into the polymeric materials, whereas the second stage probably resulted from partial degradation of the polymers by fungal growth on the polymer film. The relationship between changes of impedance spectra and microbial degradation of the polymer was further supported by scanning electron microscopy (SEM) observations of fungi growing on the surface of the inoculated polyimides. Our data indicate that the EIS can be used in detection of early degradation of resistant polymers and polyimides that are susceptible to biodeterioration.     

船舶海水管路直流杂散电流仿真研究

目的 针对某型船海水管路杂散电流腐蚀穿孔问题,研究海水管路直流杂散电流密度与直流电气设备机壳绝缘电阻关系,评估海水管路直流杂散电流腐蚀风险,提出直流电气设备机壳绝缘电阻要求,为船舶海水管路杂散电流控制提供技术支撑.方法 根据欧姆定律和腐蚀电化学原理,建立船体与海水管路直流杂散电流腐蚀仿真方法,模拟海水管路直管、弯管以及某船海水管路系统结构,以B10铜镍合金极化曲线为边界条件,开展管壁直流杂散电流密度仿真研究,并根据法拉第定律计算直流杂散电流腐蚀速率.结果 直流电气设备接地产生的直流杂散电流大部分流入船体,仅有少部分流入海水管路,正常情况下,机壳绝缘电阻大于1 M?,直流电气设备接地不会导致海水管路发生杂散电流腐蚀.结论 为避免直流电气设备接地造成海水管路杂散电流腐蚀,DC380 V和DC220 V电气设备机壳绝缘电阻应分别不小于211?和123?.     

慢摇吧低音炮传递结构噪声控制研究

对于慢摇吧低音炮传递的结构噪声,采用新型隔声材料静馨隔声毡,结合岩棉等传统吸声材料,可克服传统吸隔声材料的低频吸隔声效果差和"吻合效应"等弱点,从而有效控制音炮传递的结构噪声。     

Does marginal price matter? A regression discontinuity approach to estimating water demand

Although complex pricing schedules are increasingly common among water and electricity providers, it is difficult to determine whether consumers respond to changes in the pricing schedule because price changes are often confounded with simultaneous demand shocks or non-price policies. To overcome this challenge, we exploit a natural experiment - the introduction of a third price block in an increasing block pricing schedule for water - in Santa Cruz, California. Using a regression discontinuity design, we find that consumers do respond to changes in marginal price. Doubling marginal price leads to a 12% decrease in water use (500 cubic feet per bill) among high-use households.     

ALTERNATIVE DEMAND MODEL ESTIMATORS FOR BLOCK RATE PRICING1

ABSTRACT: Three alternative demand model estimators for water sold under block rate tariffs are examined. The models are conceptually discussed and empirically estimated using cross-section and time-series data from Tucson, Arizona. While all three techniques produce plausible elasticity estimates, the ordinary least squares and censored sample techniques are shown to produce statistically biased results.     

生态水泥胶砂块中重金属的动态浸出行为研究

采取酸性浸取剂更新条件下的动态浸出实验方法,研究了生态水泥胶砂块所制3种样品(细粒样、粗粒样、块状样)中As、Cd、Cr、Cu、Ni、Pb、Zn等7种重金属的浸出行为.结果表明,除Cd始终未检出外其他重金属均有浸出,同种样品中以Cr的浸出率为最高,同种重金属的浸出率均表现出细粒样＞粗粒样＞块状样的趋势.根据Fick定律做出各重金属的累积浸出分数Pt与t1/2的关系曲线,其在浸出进行段线性良好,表明浸出过程受扩散控制;对同种金属,有效扩散系数Deff体现出块状样＞粗粒样＞细粒样的趋势,说明较大尺寸块体的浸出过程完成得相对较快.各种重金属的Deff值普遍很低,均在10-10 cm2/s数量级左右,说明水泥固化体中重金属的浸出是缓慢而长期的过程.     

热防护系统热真空模拟试验技术

介绍了一种能模拟可重复使用运载器热防护系统内、外表面气动热和压力环境的热真空模拟试验装置,该装置不仅能模拟TPS外表面所受气动热和气动压力条件,还能模拟TPS内表面的真空压力环境。其外部环境压力4．0×10^2-2.0×10^5Pa,内部环境压力4．0～1．013×10^5Pa,热面温度可高达1100℃。利用该装置可以对热防护系统的传热性能进行稳态和瞬态测试。简要介绍了该装置的构成及功能,以及用其进行材料和结构的传热性能测试的试验方法。该装置的研制将为我国高超音速飞行器热防护系统的验证提供必要的技术手段。     

崩塌块体形成原因及其演变过程探讨

本文根据工程实例对崩塌块体进行了定义,分析了崩塌块体的形成原因及其演变过程,并提出了“类多米诺骨牌式”崩塌和“链式反应”崩塌的效应,用于解释岩性存在软硬差异的沉积岩崩塌块体发生滚落的原因.