内循环生物流化床处理丙烯酸废水的试验

介绍内循环三相生物流化床处理丙烯酸废水的中试研究。当进水ＣＯＤ为７１０—９９２ｍｇ／Ｌ时,平均去除容积负荷ＮＶ＝４．０ｋｇＣＯＤ／（ｍ３·ｄ）,污泥负荷ＮＳ＝１．６ｋｇＣＯＤ／（ｋｇＶＳＳ·ｄ）;进水ＣＯＤ为１２７７—２２７６ｍｐ／Ｌ时,ＮＶ＝６．８ｋｇＣＯＤ／（ｍ３·ｄ）,Ｎｓ＝２．８ｋｇＣＯＤ／（ｋｇＶＳＳ·ｄ）;氧利用率约１７％。同时对流化床出水进行了后处理试验,提出了丙烯酸废水的治理方案。     

空气提升内循环生物流化床反应器动力学研究

进行了空气提升内循环生物流化床反应液体内循环速度,有机的降解动力学,载体表面生物膜脱落与增工动力学的研究,结果表明,内循环生物硫化内不速度分别与反应器高度及升流区表观气速ｕｇ０．５次方成正比,当内循环流量很大时,反应器可视为ＣＳＴＲ;生物膜的脱降率分别与ｕｇ及膜厚δ的次方,载体数量的２／３次方成正比。     

用聚苯乙烯泡沫塑料废弃物调制油性腻子

以工业废弃物聚苯乙烯泡沫塑料及电厂粉煤灰为主要原料,用适量轻溶剂油调制成油性腻子,搅拌均匀经三辊机或轮碾机研磨至完全均匀细腻,包装即得产品。该产品的性能与同类油性腻子相似,而制造成本显著降低,适用于填平金属、木质、混凝土物体表面的凹坑、针孔和缝隙,同时减少了白色污染物聚苯乙烯泡沫塑料废弃物对环境的污染。     

Measurements of selected PCBs in open urban ambient air of Madrid (Spain)

The focus of this study was to characterize the concentration levels of selected PCBs and compare them to compiled data in order to contribute to the international database. The sampling site is located in the outskirts of Madrid and can be considered an open urban area. 32 samples of air were taken from February 1998 to June 1998 by using a high volume air sampler. Glass fiber filters and polyurethane foam (PUF) were used to collect the paniculate and gas phase material, respectively. PUF plugs were Soxhlet extracted and filters were ultrasonically extracted by using pesticide-grade hexane and dichloromethane, respectively. The cleanup procedure was carried out on a florisil column with hexane and hexane/dichloromethane as elution solvents. GC/MS in a selected ion monitoring mode was used for quantification and 29 selected PCBs congeners were analyzed.     

Succession of aquatic microbial communities as a result of the water quality variations in continuous water

The changes of structural and functional parameters of aquatic microbial communities in continuous water on campus of Tsinghua University, China are investigated by polyurethane foam unit(PFU) method. The measured compositions of the communities include alga, protozoa, and some metazoa (such as rotifers). The measured indicators of water quality include water temperature, pH value, dissolved oxygen (DO), potassium permanganate index(CODMn), total nitrogen(TN), total phosphorus(TP) and chlorophyll- a(Chla). The trophic level, expressed by the trophic level indices(TL/c), is assessed with analytic hierarchy process and principal component analysis (AHP-PCA) method. The changing trends of the structural and functional parameters of aquatic microbial communities, such as Margalef index of diversity(D), Shannon-weaver index of diversity (H), Heterotropy index (HI), number of species when the colonization gets equilibrium(Seq), colonizing speed constant(G) and time spent when 90 percent of Seq colonized in PFU ( T90% ), are also analyzed. The experimental results showed the succession of aquatic microbial communities along the water flow is consistent with the water quality changes, so the parameters of microbial community can reflect the changes of water quality from the ecological view.     

Identification and characterization of extracted microplastics from agricultural soil near industrial area: FTIR and X-ray diffraction method

Microplastics have been found in large quantities in agricultural soil and now become a major global issue. Different types of microplastic have adverse effects on agricultural soil. The most widely used method for the extraction of microplastics in agricultural soil is the density floatation method by using saturated NaCl solution. This method includes the pre-digestion of soil samples with H₂O₂ to remove all the organic matter present in the soil. Different types of microplastic particles were extracted and identified by using ATR-FTIR viz polypropylene, polybutylene tetrapthalate, polyethylene, polystyrene, and polyethylene tetrapthalate. The crystalline nature of extracted microplastic was checked by employing XRD analytical technique. Floatation with higher density saturated sodium chloride (NaCl) solution recovered approximately 80% MPs from soil. Floatation methods were found to be effective for extracting microplastics from soils.     

A multidecadal oscillation in precipitation and temperature series is pronounced in low flow series from Puget Sound streams

In Pacific Northwest streams, summer low flows limit water available to competing instream (salmon) and out-of-stream (human) uses, creating broad interest in how and why low flows are trending. Analyses that assumed linear (monotonic) change over the last ~60 years revealed declining low flow trends in minimally disturbed streams. Here, polynomials were used to model flow trends between 1929 and 2015. A multidecadal oscillation was observed in flows, which increased initially from the 1930s until the 1950s, declined until the 1990s, and then increased again. A similar oscillation was detected in precipitation series, and opposing oscillations in surface temperature, Pacific Decadal Oscillation, and Interdecadal Pacific Oscillation series. Multidecadal oscillations with similar periods to those described here are well known in climate indices. Fitted model terms were consistent with flow trends being influenced by at least two drivers, one oscillating and the other monotonic. Anthropogenic warming is a candidate driver for the monotonic decline, and variation in (internal) climatic circulation for the oscillating trend, but others were not ruled out. The recent upturn in streamflows suggests that anthropogenic warming has not been the dominant factor driving streamflow trends, at least until 2015. Climate projections based on simulations that omit drivers of multidecadal variation are likely to underestimate the range, and rate of change, of future climatic variation.     

旋流气浮除油装置预处理含油污水

在河南油田开展旋流气浮除油装置的现场试验,考察进水流量和曝气量对旋流气浮除油装置除油效果的影响。试验结果表明:在进水流量为1.8 m³/h、曝气量为0.5 L/min时,除油率最高达到96.03%;在不添加任何药剂的条件下,装置处理效果稳定;连续运行6 d内,进水含油量为174.57~1 193.15 mg/L时,出水含油量可以保持在137.38 mg/L以下,除油率为58.58%~94.53%。     

基于能量合成法的塔式结构刚度识别研究

在Rayleigh能量法和Southwell's频率合成法的基础上,将结构的振动基频表示为由各变形元和惯性元组成的子系统频率的合成,其中变形元为结构的弯曲变形和剪切变形,惯性元为结构的分布质量和塔顶附加质量。通过选取满足边界条件的挠度函数,建立了底部固定、顶端带有附加质量的塔式结构基频与刚度的关系,因此可通过测量结构的振动基频识别出塔式结构的抗弯刚度和抗剪刚度。以某钢塔为计算实例,采用该算法推导出了结构振动基频与弹性模量的关系,只要知道截面的几何尺寸和材料性质,便可快速识别出各截面的刚度。有限元空间建模计算结果证明了本文提出的算法具有较高精度。该方法适合底部固定的塔式结构,可为复杂空间塔式结构使用状态的监测与评估提供参考。     

含缺陷连续管冲蚀规律研究

针对内壁含缺陷的连续管冲蚀磨损严重、易失效的问题,基于冲蚀理论和液-固两相流,建立了含缺陷连续管内 壁冲蚀模型。利用Grant和Tabakoff模型求解砂砾冲蚀速率,借助实验数据验证了CFD数值模型。利用该模型研究了连续 管内壁周向均布缺陷数量及缺陷形状参数（深度、长度和宽度）对连续管内壁含缺陷时的冲蚀影响。研究表明:完整连 续管与含1个缺陷时对比,最大冲蚀率增加了4.5倍。对于深度或宽度较小的缺陷,冲蚀更为严重,缺陷会在冲蚀作用下 迅速加深或变宽,增速下降较快。含大长度缺陷连续管在压裂中会被加速损坏。