2005年陕西秋淋特征分析

通过对2005年陕西秋淋特征分析认为,2005年陕西秋淋明显且偏晚,降水强度大,落区广且地区较集中;秋淋造成渭河下游、汉江干流分别出现了1981年、1983年以来最大的洪峰.西太平洋副热带高压强盛稳定及适当的副高脊线位置和西伸脊点位置是秋淋期间强降水集中的主要原因,而2005年的台风活动也为陕西秋淋天气提供了有利的气候背景.     

Stratification and Circulation in a Shallow Turbid Waterbody

Shallow waterbodies are often assumed to be well mixed in the vertical. However, when they are characterised by high turbidity levels, absoption of solar heating within a relatively thin surface layer can produce thermal stratification. Results from an intensive monitoring program have been combined with three-dimensional circulation modelling to examine the diurnal stratification cycles in a small turbid waterbody. The waterbody, known as Rushy Billabong, is located in southeastern Australia and its high turbidity coupled with forcing by wind and solar radiation resulted in regular diurnal cycles of stratification and overturning. Under conditions of light wind and high solar radiation, the model results were generally consistent with the observed temperature field. However, under stronger winds, preferential cooling and sinking of shallow water around the edge of the lake began to contribute significantly to the interior stratification. Model estimates then became more sensitive to the detailed bathymetry and the choice of turbulence parameterisation. The level of stratification is also shown to influence the circulation in the billabong by trapping the wind-driven flow near the surface. Insights provided by the observations and modelling may have broader implications for the management of small turbid systems such as settling ponds, aquaculture ponds, and some natural wetlands.     

CITY OF TUCSON WASTE WATER EFFLUENT DELIVERY FACILITY1

ABSTRACT: The Tucson area is totally dependent on ground water, which is in increasingly short supply due to excessive overdrafts. Tucson area waste water treatment plants discharge material quantities of secondary effluent downstream, which is lost to evapotranspiration and recharge of the ground water basin. The city and the four large mining companies who share the common Santa Cruz basin ground water, recognized the common water supply problem and agreed to fund a feasibility study for mining process use of the effluent to partly alleviate the overdraft of ground water. The study analyzed the projected waste water effluent resources, potential mining company demand for waste water effluent and possible interface of an effluent delivery facility with the proposed Central Arizona Project. The effluent resources were analyzed with respect to potential demand. An optimum alignment was selected. An optimum system was detailed through design schematics, amortized cost and finance requirements, and an implementation schedule. It was concluded that a waste water effluent delivery facility could be implemented which would utilize reclaimed effluent in quantities approximating 35 percent of basin overdraft and which would provide revenue for full cost recovery over a 20 year operation period. The mining companies are studying the internal economic impacts of the project.     

Soybean-Oil-Based Polyisocyanurate Rigid Foams

Polyisocyanurate foams were prepared from polymeric 4,4-diphenylmethane diisocyanate (MDI), soy polyol and polypropylene oxide polyol by varying isocyanate index from 110 to 350. The higher isocyanate index produced polyisocyanurate foams with higher thermal stability, improved flame resistance, tensile strength, higher modulus, and higher glass transition. Soy-based foams displayed better thermal stability, lower flammability, higher rigidity (modulus) and higher compression strength than those based on the propylene oxide polyols of the same molecular weight and functionality.     

燃油箱填充用防火抑爆网状泡沫材料

网状聚氨酯泡沫材料具有97%以上的孔隙、优良的机械性能和极强的抑制爆炸连锁反应扩大和缓和燃油冲击晃动等特性.本文就这类网状材料的结构、性能和防火抑爆机理进行分析和研究,并简要介绍了这类材料的使用情况.     

石灰石/石灰-石膏湿法脱硫几种反应塔的比较

石灰石／石灰－石膏湿法烟气脱硫是控制二氧化硫排放的最常用方法。通过对该方法几种主要工艺及反应塔的比较,研究了喷淋塔,格栅塔,鼓泡塔和液柱塔在结构与工艺上的差异,以及它们在中国的实际应用,分析了各种脱硫反应塔的优缺点,并由此归纳出脱硫反应塔发展的趋势,研究结果将为脱硫工艺以及脱硫塔的选择提供依据和参考。     

厌氧水解—高负荷生物滤池处理城镇污水的试验研究

厌氧水解－高负荷生物滤池是一种利用附着在塑料模块填料上的微生物系统对城镇污水中的污染物质进行降解处理的绿色环保技术。厌氧水解池和高负荷生物滤池采用的塑料模块填料具有高空隙率、高附着面积、高布水性能和抗堵塞的优异性能,并无须回流。当厌氧水解池水力停留时间为4小时,生物滤池水力负荷为30米^3/米^2。日,该系统处理城镇污水的CODCr去除率达80－86％,BOD5去除率达85％－95％。SS去除率达85－95％,处理后出水上述各项指标均可满足国家二级生物处理排放标准的要求。与广泛运用的活性法处理系统相比,该技术可节约基建投资20％以上,节约能耗50％以上,同时还具有流程简单、管理方便、耐冲击负荷、剩余污泥少等特点。     

日本在循环社会和生态城市建设上的实践

文章重点介绍了近年来日本在循环社会和生态城市建设方面的实践,并试图探讨中国今后在生态城市建设上的发展方向。     

微涡旋絮凝-逆流气浮-纳滤集成工艺去除水中腐殖酸的研究--以聚合氯化铝(PACl)为絮凝剂

研究了微涡旋絮凝-逆流气浮-纳滤集成工艺去除水中腐殖酸的工艺特征和效果.试验结果表明,微涡旋絮凝-逆流气浮工艺去除水中腐殖酸时,在最佳投药点(PACl),出水水质符合纳滤系统预处理单元的要求,而且该工艺需要PACl絮凝剂的量较低.该预处理系统与纳滤系统组合的集成工艺可以使水中的腐殖酸浓度大大降低,且含TQ56-36FC型纳滤膜的流程1比含M-N1812A型纳滤膜的流程2效果好.前者出水的TOC值可达0.28～0.45mg·L-1,CODMn值为0.47～0.8mg·L-1,UV254nm值为0～0.0033,且有95%以上的脱盐率;后者出水的TOC值为0.52～1.25mg·L-1,CODMn值为0.66～1.0 mg·L-1,UV254nm值为0.008-0.012,脱盐率很低.另外,尽管保安过滤器/活性炭预处理有利于纳滤膜出水水质的提高,但活性炭柱与纳滤膜能去除的有机物种类有些重合,活性炭柱的存在也降低了纳滤膜对有机物的去除率.水中颗粒物的粒度分布表明,原水、絮凝后和气浮出水中颗粒物粒度分布的中位直径(d50)分别为5～6μm、10～14μm和8～13 μm.经过保安过滤器或保安过滤器/活性炭柱,水样中的颗粒物的d50为0到几个μm.经过纳滤膜后出水无颗粒物.     

催化铁内电解-生化法处理印染废水

纺织印染废水水质变化大、色度高,直接生物处理难度大.采用催化铁内电解法对浙江某地区的印染废水进行预处理,有效地去除了对生物有抑制的有机物,为后续的生化处理创造了有利条件,COD_Cr去除率达到85%;过去难以解决的色度问题也得到了有效的解决,可去除废水色度90%以上.另外,简要探讨了金属粒径,pH,温度等因素对去除有机物的影响.近40 d的连续流试验证明,内电解-生化工艺具有处理效果好、出水水质稳定、工艺设备简单、操作管理方便、能耗低等特点,是处理印染废水的有效方法之一.