In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂⁻ and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.     

Insights into multidimensional transport flux from vertical observation and numerical simulation in two cities in North China

This study represents the first quantitative evaluation of pollution transport budget within the boundary layer of typical cities in the Beijing-Tianjin-Hebei (BTH) region from the perspective of horizontal and vertical exchanges and further discusses the impact of the atmospheric boundary layer (ABL)-free troposphere (FT) exchange on concentration of fine particulate matter (PM_2.5) within the ABL during heavy pollution. From the perspective of the transport flux balance relationship, differences in pollution transport characteristics between the two cities is mainly reflected in the ABL-FT exchange effect. The FT mainly flowed into the ABL in BJ, while in SJZ, the outflow from the ABL to the FT was more intense. Combined with an analysis of vertical wind profile distribution, BJ was found to be more susceptible to the influence of northwest cold high prevailing in winter, while sinking of strong cold air allowed the FT flowing into the ABL influence the vertical exchange over BJ. In addition, we selected a typical pollution event for targeted analysis to understand mechanistic details of the influence of ABL-FT exchange on the pollution event. These results showed that ABL-FT interaction played an important role in PM_2.5 concentration within the ABL during heavy pollution. Especially in the early stage of heavy pollution, FT transport contributed as much as 82.74% of PM_2.5 within the ABL. These findings are significant for improving our understanding of pollution transport characteristics within the boundary layer and the effect of ABL-FT exchange on air quality.     

The buffering effects of aquatic sediments against acidic deposition

ＴｈｅｂｕｆｆｅｒｉｎｇｅｆｆｅｃｔｓｏｆａｑｕａｔｉｃｓｅｄｉｍｅｎｔｓａｇａｉｎｓｔａｃｉｄｉｃｄｅｐｏｓｉｔｉｏｎＬｉａｏＢｏｈａｎ；ＴａｎｇＨｏｎｇｘｉａｏ（ＲｅｓｅａｒｅｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅｓ...     

海水环境下玻璃纤维增强复合材料力学性能演化规律研究

目的 研究海水环境下海流能发电机组叶片用玻璃纤维复合材料力学性能的变化规律.方法 在实验室内通过海水浸泡试验、拉伸试验、弯曲试验以及剪切试验,测定叶片用玻璃纤维树脂基复合材料的吸水特性,以及在人工海水介质中各项力学性能参数的演变规律.结果 随着浸泡时间的增加,玻璃纤维树脂基复合材料吸水率先逐步增大、后趋于稳定,总吸水率约0.075％.抗拉强度呈先降低、后提高、又降低的趋势,抗拉强度最高可超过1100 MPa,最小值约为940 MPa.弹性模量和弯曲强度呈逐渐降低的趋势,弹性模量降幅约9.5％,弯曲强度降幅约为30％.弯曲模量变化起伏不定,变化幅度在15％以内.材料剪切强度呈先增大、后降低的趋势,最小值为189 MPa,较初始值高10 MPa.剪切模量呈先降低、后提高的现象,在浸泡28 d时,剪切模量最小,为16.4 GPa.结论 玻璃纤维增强树脂基复合材料经过长期海水浸泡后,拉伸及抗剪切性能略有降低,但降幅不大,抗弯性能下降明显,需要在叶片结构设计和强度计算时,充分考虑抗弯性能衰减的负面影响.     

天然矿石毒重石吸附硫酸盐废水的试验研究

利用天然矿石毒重石对硫酸盐废水进行吸附处理，在废水的pH=9，停留时间为80min左右时，该吸附剂具有较好的吸附效果。且该离子交换吸附法具有成本低、操作简单、无二次污染的优点。     

铜离子冲击下活性污泥微生物多样性的分子生态学分析

采用基于 16SrDNA序列分析方法 ,在长度多态 (LPM)和 16SrDNA的GC含量二维水平分析了受重金属污染的活性污泥系统内细菌的优势种类和多样性 .设计的PCR引物可以将细菌分为三大类 :即 1)proteobacterialα&δ(变形杆菌α&δ) ,2 )pro teobacterialβ&γ(变形杆菌 β&γ) ,以及 3)flexibacter(屈桡杆菌 )和革兰氏阳性菌 .分析了未受重金属驯化和受重金属驯化的两类活性污泥系统在重金属作用下优势种和多样性的变化 ,结果显示未驯化的活性污泥系统多样性减少但优势种的变化微小 ,而驯化系统优势种有较大的变化 ,但多样性基本不变 .这一结果证实驯化有助于提高微生物对重金属的抗性     

含硫污水系统耐蚀材料的筛选与应用

针对西北地区一综合炼油厂含硫污水管线的严重腐蚀问题，分析了腐蚀原因，确立了材料筛选方案，通过实验室静态挂片试验绘制了重量损失率变化曲线和现场挂片等试验手段，筛选推荐出了树脂玻璃钢耐蚀材料。工业生产应用结果表明，MFE-2型树脂玻璃钢是适用于该厂含硫污水系统的耐蚀材料，为类似装置的长周期运行提供了借鉴和经验。     

用植物清除土壤中的重金属

介绍了生物修复技术去除土壤中的重金属及对植物的要求.植物能去除土壤中的有毒金属,将金属富集在生物体内,或将金属变成挥发性气体.     

稀土作业者外周血淋巴细胞姊妹染色单体互换的观察

本文报告了 5 0例稀土作业工人外周血淋巴细胞姊妹染色单体互换 (SCE)的观察结果 ,其 SCE频率为 5 .49± 1.2 1(SCE/ cell,X SE) ,与 2 0例对照组相比 ,差异显莉 (P<0 .0 1)。随工令的延长 ,SCE频率为增高的趋势 ,但各工令组之间 ,经统计学处理 ,差异不显著 (P<0 .0 5 )。男工 SCE率高于女工 ,这可能与男工吸烟人数多于女工有前。我们认为 :SCE可作为稀土作业人员早期危害观察指标     

国际环境法中环境信息交流制度

环境信息国际交流制度，已成为国际环境法的一项基本法律制度，其内容涉及各国和国际组织在这项交流中的地位，作用及机构，权利和义务，交流范围和形式，这项制度对有效保护人类环境发挥了多方面积极作用，在尊重各国主权，合作取得和共同享有，支持发展中国家参与交流原则基础上，这项制度将日益丰富，多样，完善。