脉冲强光对水中枯草杆菌灭活效果的研究

脉冲强光杀菌技术是近年来开发的一种新型冷杀菌技术,利用强烈的白光闪照进行杀菌。以枯草杆菌为目标微生物,对比研究脉冲强光与紫外线对微生物的灭活效果。并通过改变脉冲强光装置的输入电压和闪照次数,研究了影响脉冲强光杀菌的影响因素。     

2015年干季佛山一次重空气污染过程形成机理研究

2015年12月21-23日,广东珠三角佛山地区出现了一次PM_2.5重污染过程.利用佛山地区顺德、禅城、三水3个站点风廓线雷达、激光雷达和微波辐射计观测资料,结合地面气象观测数据和污染物浓度数据,分析研究了这次重污染过程的形成机理.结果表明：1形成这次污染过程的主要原因是近地层偏南风和偏北风对峙导致水平风速减小,大气水平输送能力变差;持续时间长且强度达到3℃·km^-1的强逆温抑制了污染物的垂直扩散;800 m以下超过90%的高相对湿度造成气溶胶粒子吸湿增长显著.2持续时间长且比较深厚的小风层是造成这次污染过程的直接原因,小风层厚度是预报空气质量变化的较好工具.与地面风速相比,PM_2.5浓度与小风层厚度的相关系数最多能提高0.36,且具有较长的预报时效.佛山地区小风层的风速阈值为3.8 m·s^-1.3这次污染过程存在两种不同的污染形成机制,污染前期（21-23日中午）主要以本地污染物累积为主,污染后期（23日下午）下风向地区（三水）的污染主要是受上风向地区（顺德和禅城）的污染输送影响.     

石墨相氮化碳协同UV-H_2O_2光催化降解亚甲基蓝

以三聚氰胺为前驱体,经热解—回流法制备了石墨相氮化碳(g-C3N4),采用XRD、FTIR、SEM、EDS、PL等技术对g-C_3N_4进行了表征。研究了g-C_3N_4在UV-H_2O_2体系中对废水中亚甲基蓝(MB)的光降解效果。实验结果表明,UV+g-C_3N_4催化剂+H_2O_2体系能协同降解MB,在初始MB质量浓度为20 mg/L、初始废水p H为5、废水体积为250 mL、g-C_3N_4加入量为0.10 g、H_2O_2浓度为0.4 mmol/L、反应温度为25℃的优化工艺条件下,紫外光照射70 min时MB脱色率达98.32%。g-C_3N_4催化剂具有较好的重复使用性能,使用5次后MB脱色率仍保持在95.10%。     

Photodegradation of Oryzalin in aqueous isopropanol and acetonitrile

The phototransformation of Oryzalin was studied under UV light (λ_max ≥ 290 nm) and sunlight (λ_max ≥ 250 nm) in aqueous isopropanol and acetonitrile solution in absence and presence of TiO₂ as sensitizer. The rate of photodegradation of Oryzalin in different solvent system followed first-order kinetics, and calculated half-lives were found to be in the range of 23.52-53.75 h for UV light and 41.23-61.43 h for sunlight. From this study, total 12 photoproducts were identified and characterized on the basis of column chromatography and Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved was hydrolysis, breaking of sulfonic bond, and loss of amino and sulfonic acid group.     

Wood-Specific Polycyclic Aromatic Hydrocarbon (PAH) Patterns in Soot Using Gas Chromatography-Atmospheric Pressure Laser Ionization-Mass Spectrometry (GC-APLI-MS)

If organic matter is burnt, the combustion of wood produces the highest amounts of polycyclic aromatic hydrocarbons (PAHs) compared with other fossil energy sources such as oil, coal, or gas. Emissions from wood combustion are increasingly of special interest due to the rising use of wood as a renewable energy source in residential heating in Europe. To the authors' knowledge, reproducible wood-specific PAH patterns in soot were identified for the first time by use of a sampling interval of only 5 min in this study. The short sampling interval was enabled by the very sensitive analytical method of gas chromatography–atmospheric pressure laser ionization–mass spectrometry (GC-APLI-MS) applied. The analysis of 40 PAH of soot from wood logs of spruce, pine, larch (softwood) and beech, birch, oak (hardwood), and wood pellets, as well as wood briquettes, showed 13.46–250.62 mg/kg for ∑40 PAH and 10.75–177.94 mg/kg for the U.S. Environmental Protection Agency PAH standard (without acenaphthylene and anthracene). Highest concentrations occurred in the samples from birch with bark, beech, and wood briquettes. Indeno[1,2,3-cd]pyrene, naphthalene, and alkylated naphthalenes were also detected. Significant concentrations of the very toxic dibenzopyrenes (up to 11.30 mg/kg) are reported. Softwood soot contained highest amounts of 2–4-ring PAH, followed by hardwood which is in accordance with the presence of highest amounts of abietic acid in softwood, a known precursor of retene and phenanthrene. PAH in soot from five spruce samples from different locations show a mean ∑40 PAH concentration of 13.46 mg/kg (n = 5, minimum 8.03, maximum 23.32 mg/kg, SD = 5.65) and exhibited a typical pattern that differed from all other wood soot samples. The distributions of alkylated naphthalenes of the spruce samples show a bell-shape distribution in contrast to the alkylated phenanthrenes/anthracenes of all samples (except the wood pellets), showing a slope distribution. The data indicate that wood-specific PAH patterns exist and under the applied conditions, spruce logs produced the least toxic soot.     

光照条件对跑道池光生物反应器内蛋白核小球藻生长特性的影响

本文采用多孔曝气管的曝气方式,以蠕动泵为藻液循环的动力,研究了气体流量、光照强度、光照周期等因素对跑道池光生物反应器内蛋白核小球藻生长与代谢特性的影响,并利用傅里叶红外光谱半定量法对不同光照条件下藻细胞内蛋白质、油脂以及多糖含量变化进行了分析。研究结果表明,适当的气体流量、光照强度和光照周期有利于跑道池内蛋白核小球藻细胞的生长和代谢。在本实验条件下,在最佳气体流量2 000 m L/min条件下,光照强度为3 500μW/cm2,光照周期为16∶8时最有利于蛋白核小球藻的生长;光照强度为2 000μW/cm2和光照周期为16∶8的条件均有利于藻细胞内油脂的积累。     

大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

臭氧法对酸性嫩黄G溶液的脱色效率和残留物的分析

实验考察了臭氧对酸性嫩黄G色度脱除和其溶液pH值的变化情况,并对降解溶液中的残留物进行定量分析。结果发现,20min时,脱色率达到97.5%;有酸性物质生成并使得溶液的pH值随反应时间的推移下降,pH与脱色率总体变化趋势一致。经反应,分子中的—SO3Na基团大部分生成了SO42-;N并没有氧化成NO2-、NO3-,而是生成其它含N化合物。     

模拟可见光下土壤表面石油的光化学降解研究

在模拟可见光照射下,分析了土壤中的初始含油量、土壤类型和土壤pH值对石油在土壤表面光降解过程的影响,并利用紫外-可见分光光度法(UV-Vis)、气相色谱-氢火焰离子化检测器(GC-FID)和傅立叶红外光谱(FTIR)等方法对石油在光降解过程中的演变规律进行研究.结果表明,石油在土壤表面上的光化学降解行为符合准一级反应动力学,实验测得石油的光解速率常数为0.002 6～0.017 2 h^-1,半衰期为40～267 h.GC-FID分析结果表明,在光降解50 h后,石油的饱和烃组分中高碳数的烷烃相对含量降低,低碳数的烷烃相对含量提高;芳香烃组分的大部分色谱峰有明显地降低或消失.红外光谱分析发现,光照60 h后土壤萃取液中可能产生了羰基类化合物,说明石油在光降解过程中逐渐发生氧化.     

用环己烷氧化副产物制备浮选剂

在固体酸催化剂作用下,用环己烷氧化制备环己酮的副产物——酸性油和轻质油进行酯化反应,制备了羧酸混合酯,酯化反应的最佳工艺条件：n（C4-C5醇）：n（有机羧酸）=1．2：1,催化剂质量分数为1．5％,反应温度为110-160℃,反应时间为5h。经应用评价结果表明,该羧酸混合酯是一种性能优异的选煤浮选剂。