The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

垃圾填埋场对地下水污染的模拟研究

在对长春市某垃圾填埋场进行野外调查的基础上 ,于室内进行了垃圾淋滤模拟实验。分析了垃圾渗滤液污染组分的自然衰减规律 ,建立了垃圾填埋场地下水污染的数值模型 ,采用FEFLOW软件对其进行模拟和预报 ,并取得了较好的效果 ,最后提出防止和防治垃圾填埋场污染地下水的若干措施。     

利用矿化垃圾层预防和控制渗滤液导排系统堵塞

在卫生填埋场中,垃圾渗滤液导排系统堵塞普遍存在,悬浮固体形成的物理堵塞、有机物降解和金属离子沉淀导致的生物-化学堵塞是引起导排系统堵塞的关键因素.本文构建了"矿化垃圾+砾石层导排"的渗滤液下渗装置,通过矿化垃圾预处理渗滤液中悬浮固体和有机物以控制导排系统发生的物理和生物-化学堵塞.结果表明,在矿化垃圾层,渗滤液中化学需氧量(COD)和悬浮固体(SS)去除较多,去除率分别达到了85%和87%,并且Ca²⁺浓度也出现了波动较大的现象;然而,渗滤液在砾石层下渗过程中,其COD、SS和Ca²⁺浓度保持稳定.并且,砾石层可排水孔隙率在长期运行的过程中没有明显变化,表明渗滤液在砾石导排层没有形成明显的沉淀.与此同时,在没有添加矿化垃圾的对照组发现,砾石层可排水孔隙率减少最多的区段是渗滤液的进水点位(可排水孔隙率减少达到了53%),即渗滤液有机负荷最大处的饱和砾石层堵塞最为严重,其无机堵塞物主要是碳酸钙等.因此,在渗滤液流入砾石层前,采用矿化垃圾层部分饱和的方式对渗滤液中有机物和悬浮固体进行预处理,可以预防和控制渗滤液在砾石层形成沉淀堵塞.研究为填埋场的运行管理渗滤液导排系统堵塞提供了新的思路和方法.     

工程规模长填龄渗滤液膜生物-纳滤组合设施各单元污染物去除效能

填埋场渗滤液性质复杂,普遍采用生物处理与深度处理多单元串联工艺;但是,因缺乏对工程运行规模中各单元污染物处理贡献的评估数据,使优化单元组合方式缺少理论依据.因此,本文采用常规和荧光光谱指标结合的方法,对以采用"膜生物反应器（membrane biological reactor,MBR）+纳滤（nanofiltration,NF）"工艺、处理能力800 m³·d^-1的工程设施为对象,分析该组合工艺各单元对长填龄渗滤液处理贡献;同时,利用三维荧光-平行因子分析方法（excitation emission matrix fluorescence spectroscopy-parallel factor,EEM-PARAFAC）评估渗滤液中溶解性有机物（dissolved organic matters,DOM）性质的变化.结果表明,生物处理阶段对溶解性氮（dissolved nitrogen,DN）去除贡献率为74.7%,其中一级反硝化单元对DN去除贡献率为54.6%,外置式超滤单元对溶解性化学需氧量（dissolved chemical oxygen demand,sCOD）和溶解性碳（dissolved oganic carbon,DOC）降低贡献率分别为92.2%和93.3%,纳滤单元可有效去除重金属和盐分,但能力有限.通过追踪长填龄渗滤液DOM变化发现,一级反硝化单元可去除长填龄渗滤液中75.4%的类蛋白物质,超滤单元主要截留亲水性较高的DOM,而高芳香性的腐殖质主要通过纳滤截留,腐殖化程度越高截留效果越好.研究结果提示,处理长填龄渗滤液时,MBR工艺生物处理单元可适当简化,超滤单元则应预防堵塞.     

煤矸石在新型动态循环淋溶装置中的淋溶特性

采用新型循环淋溶装置对煤矸石进行连续240h的淋溶实验,研究了煤矸石中重金属在淋溶过程中的溶出规律,通过向淋溶液中添加聚丙烯酰胺（CPAM）考察了固体颗粒物的沉降特性.结果表明： 随着淋溶反应时间延长,煤矸石中碱金属Na元素溶于水,形成碱性溶液,这两种因素导致淋溶反应初期淋溶液pH值升高.As、Zn离子浓度在淋溶时间为1~24h时呈上升趋势,而在24~72h,离子浓度呈下降趋势.淋溶液中Cr、Pb、Ba离子浓度在120h内均呈现上升趋势,而在120~240h,对于Cr离子来说,淋溶液的碱性环境促使Cr离子溶出率增大,但取样次数的增多也对Cr离子的浓度降低起到促进作用;淋溶液稀释和Ba离子的沉淀化合物形成,导致淋溶液中Ba离子浓度降低.120~240h,淋溶液中有机物被微生物的生化作用分解以及取样后外加塌陷区水体对淋溶液中COD和BOD起到稀释作用,使COD和BOD降低.在淋溶反应24h内,淋溶液中TON和NH₃-N出现波浪式变化,淋溶时间大于24h时,TON和NH₃-N总体呈升高趋势.随着淋溶时间延长,淋溶液中的固体颗粒物沉降速度逐渐变慢,延长了沉降时间.煤矸石中一些含氮化合物溶解于水中,使淋溶液中电离出 NH₄⁺离子,形成碱性环境.     

垃圾填埋场渗滤液中药物和个人护理品的存在与去除

采用固相萃取–高效液相色谱/串联质谱法,分析上海市某生活垃圾填埋场渗滤液中7种典型药物和个人护理品（PPCPs）的浓度水平,并考察该填埋场的渗滤液处理工艺对目标PPCPs的处理效果.结果表明,所建立的分析方法具备较好的回收率（89%~173%）、相对标准偏差（<20%）和方法检出限（0.025~1.0μg/L）,能满足实际环境样品的分析需要.应用该方法检测到渗滤液中目标PPCPs的含量在低于检出限（90%,总去除率可达到97%以上,出水PPCPs浓度范围为     

臭氧-曝气生物滤池深度处理垃圾焚烧渗滤液可行性研究

研究了臭氧-曝气生物滤池(BAF)代替纳滤和反渗透深度处理垃圾焚烧渗滤液达标排放的技术可行性.半间歇臭氧氧化试验表明,实验用水的可生化性随着氧化时间的增加而增加,色度及UV254, 15min内去除率分别达91%和64%;氧化时间为45min时COD去除率59%, 45min后COD去除较慢, 120min时去除率77%.确定臭氧氧化时间为1h,在同样臭氧浓度与流量下进行了臭氧-BAF处理垃圾焚烧渗滤液的连续实验.结果发现,此工艺对COD、色度和UV254的去除率分别可达75%,95%和90%,其中2/3运行时间里COD低于排放标准100 mg/L.其中出水色度可稳定保持在40度以下达标排放.经过进一步优化,臭氧-BAF有望用于垃圾焚烧渗滤液的达标处理.GC-MS检测表明烷烃,芳香族化合物及含氮杂环化合物是试验用水的主要污染物,臭氧-BAF能够有效去除后两类化合物,但难以去除烷烃.     

Indicating landfill stabilization state by using leachate property from Laogang Refuse Landfill

Variation and evolution process of leachate can be applied as a reference for landfill stabilization phase. In this work, leachates with different ages were collected from Laogang Refuse Landfill, and characterized with 14 key parameters. Simultaneously, principal component analysis （PCA） was applied to develop a synthetic parameter-F based on these 14 parameters, and a logarithm equation was simulated for the landfill stabilization process finally. It was predicted that leachates would meet Class I and Class II in standard for pollution control on the landfill site of municipal solid waste （GB 16889-1997） after 32 years and 22 years disposal under the natural attenuation in the humid and warm southern areas of China, respectively. The predication of landfill state would be more accurate and useful according to the synthetic parameter F of leachate from a working landfill.     

硫酸铝渣和硫铁矿烧渣制聚硅酸硫酸铁的研究

研究硫酸铝渣和硫铁矿烧渣制聚硅酸硫酸铁的工艺流程及其主要参数.提取硫酸铝渣中的SiO2得到Na2SiO3溶液,提取硫铁矿烧渣中铁得到FeSO4结晶.用FeSO4结晶制备聚合硫酸铁.用含3.5% SiO2的Na2SiO3溶液,控制pH=4.0,制得聚硅酸,将聚合硫酸铁加入聚硅酸制得聚硅酸硫酸铁絮凝剂.红外光谱分析表明,聚硅酸硫酸铁结合了SO2-4.检测了聚硅酸硫酸铁对模拟浊水和垃圾填埋场渗滤液的絮凝效果,用铁和硅物质的量比为0.5、用量0.5 mL/L的聚硅酸硫酸铁,处理模拟浊水,除浊率可达90%以上.用铁和硅物质的量比为1.5、用量4.0 mL/L的聚硅酸硫酸铁处理垃圾填埋场渗滤液生化处理尾水,CODCr去除率可达60%.