高效液相色谱-串联质谱法同时测定地表水中33种药物

采用固相萃取-高效液相色谱-串联质谱法(SPE-HPLC-MS/MS)建立了地表水中25种抗生素类药物和8种非抗生素类药物的分析方法。通过重点优化质谱参数、色谱条件、样品pH、洗脱溶剂组成及用量等确定了最佳分析条件。水样经过滤、固相萃取柱富集净化后,选择Shim-pack XR-ODS为色谱柱,以乙腈和0.2%甲酸-2 mmol/L乙酸铵-水溶液为流动相进行梯度洗脱,采用电喷雾电离源,在多反应监测模式下(MRM)分析测定,内标法定量。33种药物的仪器定量限为0.012～4.68 ng/L,方法检出限为0.011～7.60 ng/L,地表水加标回收率为53.7%～122%,相对标准偏差为1.22%～32.1%(n=6)。方法成功应用于北京市凉水河12个地表水样分析,共检出32种药物,检出质量浓度为未检出～239 ng/L。利托那韦(RTV)作为新型冠状病毒诊疗方案中推荐的药物在凉水河检出率为100%。     

A method to extract algae toxin of microcystin-LR

A simple and low-cost method to obtain cyanobacterial toxin microcystin-LR(MC-LR) was developed. A new strain of Microcystis aeruginosa,named DC-1, producing microcystin-LR but not microcystin-RR, was separated from the field blooming algae samples of Dianchi Lake.in southwest of China. Following three times‘freeze and thaw treatment, the cultivated DC-cells were extracted with 40% methanol in water.The extract was centrifuged and the supernatant applied to a Hydrophilic-Lipophilic Balance(HLB) SPE cartridge.Eluted impuries with a certain gradient from 30% to 50% methanol in water, MC-LR was finally eluted from the HLB cartridge with 60%.may be used in adsorption and biodegradation experiments instead of using expensive standard reagents.     

混汞法采金地区的汞污染研究进展

混汞法是一种设备简单、操作简便且应用历史悠久的提金方法 ,在世界范围内得到了普遍使用 ,同时也导致了严重的汞污染。本文介绍了混汞法的流程以及汞的释放过程和释放因子 ;综述了应用混汞法提金的不同国家和地区 ,对由此引发的大气、水体、生物 (包括人体 )和土壤汞污染的研究现状 ,并讨论了采金地区的环境管理政策     

采用络合萃取法从维生素B12发酵废液中回收丙酸

采用络合萃取法回收维生素B12发酵废液中的丙酸,确定了络合萃取的最佳工艺条件：以0．5mol／L的磷酸三丁酯(TBP)为络合剂,油水比(体积比)为1：2,常温下萃取30min。在最佳工艺条件下单级萃取率为56％左右,四级萃取率可达98％以上。络合萃取过程中使用的有机溶剂可反复使用,使成本大大降低。     

Indian dye yielding plants: Efforts and opportunities

The present review article deals with the information on the dye‐yielding plants of India. Dyes are intensively coloured compounds that are applied to a substrate such as fibre, paper, cosmetics, hair, etc. to give colours and can be extracted from the roots, fruits/berries, bark, leaves, flowers, and stem/wood, fungi, and lichens by various processes of extractions. In addition to their dye‐yielding characteristics, many of these plants possess medicinal values and can be used for multiple other purposes. Plant derived‐colours have an important role in human life because of their safe and eco‐friendly nature. But due to the availability of economically cheaper synthetic dyes, the indigenous knowledge of extraction, processing, and proper utilisation has been diminished. Nowadays, the demand for natural dyes has been increased worldwide due to awareness about their beneficial properties. It has been essential that proper documentation and measure of conservation should be undertaken to preserve these natural dye‐yielding plants. This review article is an aid to a collective inquiry into Indian dye plants.     

通过式固相萃取/超高效液相色谱-串联质谱法测定蔬菜中18种农药残留

建立了超高效液相色谱-串联质谱(UPLC-MS;MS)快速测定蔬菜中18种农药残留的方法.样品经乙腈提取后,经Oasis PRiME HLB固相萃取柱净化,采用ACQUITY UPLC HSS T3 C18(50 mm×2.1 mm,1.8μm)色谱柱进行分离,以0.1%甲酸水溶液和乙腈作为流动相进行梯度洗脱.采用电喷雾电离源、正离子模式下以多反应监测(MRM)进行定性和定量分析.结果表明,18种农药在0.5—50μg·L^-1范围内线性关系良好(r2>0.995),方法最低检出限为0.4—1.5μg·kg^-1,最低定量限为1.4—5.0μg·kg^-1.在韭菜、芹菜、番茄、白菜基质中,5、10、50μg·kg^-1添加水平下的加标回收率为60.2%—126.9%,相对标准偏差(RSD)为0.4%—21.6%(n=3).     

高瓦斯易自燃工作面高抽巷瓦斯抽采与采空区遗煤自燃相互影响研究

为了实现瓦斯与煤自燃两大灾害的联合防治,首先对布置高抽巷条件下瓦斯与遗煤自燃多因素相互影响关系进行了理论分析和归纳总结。结合淮南潘二煤矿11223高瓦斯易自燃工作面,建立了带有高抽巷的物理模型,利用UDF编译了本煤层与邻近层瓦斯涌出源项、采空区三维孔隙率和低温条件下煤氧化反应氧气消耗速率。在此基础上,分析了高抽巷布置参数和抽采参数以及工作面风量对高抽巷瓦斯抽采效果和采空区自燃带分布相互影响的规律。结果表明,当工作面风量为2 000 m3/min,高抽巷布置在顶板上方40 m时,高抽巷瓦斯抽采浓度和纯量分别达32.3%和29.07 m3/min,占总瓦斯涌出量的69.71%,同时能满足实际防火的要求。研究结果可为类似条件下高抽巷最佳施工与抽采参数提供借鉴。     

燃气加热炉火焰视频监控系统设计

为了持续监测燃气工业加热炉燃烧状况,保障锅炉运行安全,根据燃气火焰的特点,利用数字图像处理技术,设计了相应的燃气加热炉火焰视频监控系统。通过图像预处理、火焰特征提取、火焰特征分析三个步骤,可实现对炉膛火焰燃烧状态进行实时判定,包括火焰燃烧或熄灭、燃烧是否充分、是否稳定。仿真实验结果表明,该系统能准确地从监控视频中检测和识别火焰燃烧状态,并能将燃烧特征量和特征分析结果存储到数据库以供事后查询。     

易失稳瓦斯抽采钻孔加固技术数值模拟研究

针对松软煤层瓦斯抽采钻孔稳定性差、钻孔形变较大、钻孔及周围煤体漏风严重等造成钻孔密封难的技术难题,提出了预先采用加固技术来提高松软煤层瓦斯抽采钻孔的稳定性,合理的解决钻孔高效密封的现实难题。首先,阐述了易失稳瓦斯抽采钻孔加固技术的基本原理。其次,利用FLAC3D模拟软件对比分析了松软煤层、硬质煤层在不同固孔材料固化后钻孔周围位移场变化。研究表明:采取固孔措施后的钻孔相比措施前等值线分布稀疏,梯度较小,不同位置处的煤体的位移量差别较小。钻孔形成后,顶部位移量均大于底部位移量,左右两帮的位移量基本相同,有效的降低钻孔周边煤体的位移变化量,增强钻孔稳定性,为钻孔的高效密封提供了保障。     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.